To upgrade the software on a USM Go instrument, copy the upgrade file to the root directory of an SD card with only that one file present. Insert the SD card into the USM Go and power it on while holding down three buttons until the upgrade mode is displayed. The upgrade takes about five minutes and automatically restarts the instrument when complete, displaying the new software version.
To upgrade the software on a USM Go instrument, copy the upgrade file to the root directory of an SD card with only that one file present. Insert the SD card into the USM Go and power it on while holding down three buttons until the upgrade mode is displayed. The upgrade takes about five minutes and automatically restarts the instrument when complete, displaying the new software version.
To upgrade the software on a USM Go instrument, copy the upgrade file to the root directory of an SD card with only that one file present. Insert the SD card into the USM Go and power it on while holding down three buttons until the upgrade mode is displayed. The upgrade takes about five minutes and automatically restarts the instrument when complete, displaying the new software version.
To upgrade the software on a USM Go instrument, copy the upgrade file to the root directory of an SD card with only that one file present. Insert the SD card into the USM Go and power it on while holding down three buttons until the upgrade mode is displayed. The upgrade takes about five minutes and automatically restarts the instrument when complete, displaying the new software version.
Part No. 021-247-574, Rev 1 USM Go Software Upgrade Procedures Copy the USM Go upgrade file (.sdu) to the root directory of an SD card. For proper operation, only one .sdu file should be present on the SD card.
Insert SD Card into SD Card slot on the USM Go instrument.
With the USM Go turned off, Press & Hold the FUNCTION 2 (#6), GAIN DOWN (#4) and POWER buttons until the instrument turns on. Notes: Flash Upgrade Mode/Loading File should be displayed, if not turn off instrument and ensure all three keys are pressed firmly. Upgrade process will take approximately 5 minutes, and the lines of operating code can be seen upgrading on the screen of the USM Go. Instrument will automatically shut off when upgrade process is completed.
Restart the instrument. Note: The new version of operating software will now be displayed on the splash screen. Your instrument is now fully upgraded, and ready to use.
GE Measurement & Control Solutions 50 Industrial Park Road Lewistown, PA 17044 Tel: 1 866 243 2638 Tel: 1 717 447 1562 E-mail: geit-info@ge.com