The document specifies the design and material requirements for a POM sealing chain. The chain must be designed according to European standards and consist of interlocking elements that can adapt to deformation. The width and height of the individual elements is defined based on the elastomer diameter. The POM sealing ring must be molded as an integral part of the elastomeric pad during vulcanization. The document also provides the required material properties for the polyoxymethylene used to mold the seals.
The document specifies the design and material requirements for a POM sealing chain. The chain must be designed according to European standards and consist of interlocking elements that can adapt to deformation. The width and height of the individual elements is defined based on the elastomer diameter. The POM sealing ring must be molded as an integral part of the elastomeric pad during vulcanization. The document also provides the required material properties for the polyoxymethylene used to mold the seals.
The document specifies the design and material requirements for a POM sealing chain. The chain must be designed according to European standards and consist of interlocking elements that can adapt to deformation. The width and height of the individual elements is defined based on the elastomer diameter. The POM sealing ring must be molded as an integral part of the elastomeric pad during vulcanization. The document also provides the required material properties for the polyoxymethylene used to mold the seals.
The document specifies the design and material requirements for a POM sealing chain. The chain must be designed according to European standards and consist of interlocking elements that can adapt to deformation. The width and height of the individual elements is defined based on the elastomer diameter. The POM sealing ring must be molded as an integral part of the elastomeric pad during vulcanization. The document also provides the required material properties for the polyoxymethylene used to mold the seals.
1. DESIGN REQUIREMENTS The POM-sealing chain shall be designed according to Euronorms prEN 1337-5:1999. The POM sealing chain shall consist of individual interlocking elements which can adapt easily to deformation. Width and hight of the individual elements shall be : a) elastomer diameter D 550 mm: 10 mm 0.5 mm; b) elastomer diameter D > 550 mm: 15 mm 1.0 mm The POM-sealing ring shall be moulded as an integral part of the elastomeric pad during the vulcanisation process to ensure correct functioning. 2. MATERIAL PROPERITIES The material used for the moulded seals shall be polyoxymethylene (POM) and shall have the properties shown below table.
Property In accordance with Requirements Density ISO 1183:1987 1410 kg/m 3 6,0 kg/m 3
Melt-Flow MFI 190/2, 16 ISO 1133:1981 10 g/min 2,0 g/min Ultimate Tensile Strength ISO 527-2:1986 62 N/mm 2