Professional Documents
Culture Documents
Rumus Antoine
Rumus Antoine
Rumus Antoine
The Antoine equation[1] is a vapor pressure equation and describes the relation between vapor
pressure and temperature for pure components. The Antoine equation is derived from the ClausiusClapeyron relation.
The equation
where p is the vapor pressure, T is temperature and A, B and C are component-specific constants.
The simplified form with C set to zero:
is named the August equation, after the German physicist Ernst Ferdinand August (17951870). The
August equation describes a linear relation between the logarithm of the pressure and the reciprocal
temperature. This assumes a temperature-independent heat of vaporization. The Antoine equation
allows an improved, but still inexact description of the change of the heat of vaporization with the
temperature.
The Antoine equation can also be transformed in a temperature-explicit form with simple algebraic
manipulations:
[edit]Validity range
Usually, the Antoine equation cannot be used to describe the entire saturated vapour pressure curve
from the triple point to the critical point, because it is not flexible enough. Therefore, multiple
parameter sets for a single component are commonly used. A low-pressure parameter set is used to
describe the vapour pressure curve up to the normal boiling point and the second set of parameters is
used for the range from the normal boiling point to the critical point.
Example calculation
The normal boiling point of ethanol is TB = 78.32 C.
from millimeters of mercury to pascals it is sufficient to add the common logarithm of the factor
between both units to the A parameter:
8.20417
C
1642.89
230.300
10.32907
C
1642.89
-42.85
A similarly simple transformation can be used if the common logarithm should be exchanged by the
natural logarithm. It is sufficient to multiply the A and B parameters by ln(10) = 2.302585.
The example calculation with the converted parameters (for K and Pa):
A
23.7836
C
3782.89
-42.85
becomes
(The small differences in the results are only caused by the used limited precision of the coefficients).
[edit]Extension of the Antoine equations
To overcome the limits of the Antoine equation some simple extension by additional terms are used:
The additional parameters increase the flexibility of the equation and allow the description of the entire
vapor pressure curve. The extended equation forms can be reduced to the original form by setting the
additional parameters D, E and F to 0.
A further difference is that the extended equations use the e as base for the exponential function and
the natural logarithm. This doesn't affect the equation form.
See also the Wagner Equation[3]
[edit]Sources for Antoine equation parameters
di mana p adalah tekanan uap, T adalah temperatur dan A, B dan C adalah komponen-spesifik
konstanta.
Bentuk disederhanakan dengan C diatur ke nol:
bernama persamaan Agustus, setelah fisikawan Jerman Ernst Ferdinand Agustus (1.795-1.870).
Persamaan Agustus menggambarkan hubungan linier antara logaritma dari tekanan dan temperatur
timbal balik. Ini mengasumsikan panas suhu-independen penguapan. Persamaan Antoine
memungkinkan deskripsi ditingkatkan, tapi masih tidak tepat dari perubahan panas penguapan dengan
suhu.
Persamaan Antoine juga dapat ditransformasikan dalam bentuk suhu-eksplisit dengan manipulasi
aljabar sederhana:
Biasanya, persamaan Antoine tidak dapat digunakan untuk menggambarkan seluruh uap jenuh kurva
tekanan dari titik tripel ke titik kritis, karena tidak cukup fleksibel. Oleh karena itu, set parameter untuk
beberapa komponen tunggal yang umum digunakan. Satu set parameter tekanan rendah digunakan
untuk menggambarkan kurva tekanan uap sampai ke titik didih normal dan set kedua parameter yang
digunakan untuk rentang dari titik didih normal ke titik kritis.
Contoh perhitungan
Titik didih normal etanol adalah TB = 78,32 C.
Sebuah transformasi serupa sederhana dapat digunakan jika logaritma harus ditukar dengan logaritma
natural. Hal ini cukup untuk memperbanyak parameter A dan B oleh ln (10) = 2,302585.
Contoh perhitungan dengan parameter dikonversi (untuk K dan Pa):
ABC
23,7836 3782 .89 -42,85
menjadi
(Perbedaan kecil dalam hasil hanya disebabkan oleh presisi terbatas digunakan koefisien).
[Sunting] Perpanjangan persamaan Antoine
Untuk mengatasi batas-batas dari persamaan Antoine beberapa ekstensi sederhana dengan ketentuan
tambahan yang digunakan:
Parameter tambahan meningkatkan fleksibilitas dari persamaan dan memungkinkan deskripsi kurva
tekanan uap keseluruhan. Bentuk persamaan diperpanjang dapat direduksi menjadi bentuk aslinya
dengan menetapkan parameter tambahan D, E dan F ke 0.
Perbedaan lainnya adalah bahwa persamaan diperpanjang menggunakan e sebagai dasar untuk fungsi
eksponensial dan logaritma natural. Hal ini tidak mempengaruhi bentuk persamaan.
Lihat juga Persamaan Wagner [3]
[Sunting] Sumber untuk parameter persamaan Antoine