Professional Documents
Culture Documents
Wafer Type Butterfly Valves Specs
Wafer Type Butterfly Valves Specs
MAKE: AUDCO
Sl.No.
Butterfly Valve
Qty., Nos.
Size NB (mm)
1
600
300
200
150
100
18
SPECIFICATIONS:
i. a.
Design manufacture
Testing code
BS 12266
ii.
Type
iii.
PN 16
iv.
End connection
v.
Operating pressure
16 bar
vi.
Maximum
pressure for
Valves
b.
vii.
operating :
testing of
Body : 24 bar
Seat : 17.6 bar
Material of construction
Body
SG BS 2789
Disc
Shaft
AISI SS 410
Seat
EPDM / NEOPRENE
Handle/worm gear
viii.
SS
ix.
Operation
General conditions:
1. Dimensional drawing indicating parts and their material of construction shall be
sent for approval after receipt of order.
2. ISRO representatives will inspect all valves prior to despatch
3. The scope of inspection.
a). Dimensional verification.
b). Witness of shell & seat hydro test.
4. Painting: Outer surface of the valve body, Gear unit & wheel shall be painted
with epoxy paint ( Primer: Minimum 60 Microns and Finish coat: Minimum 40
Microns)
Total DFT of paint shall be 100 to 120 Microns.
Paint Shade : Azure blue
5. SS Tag numbering plates of Size 50mm x15mmx 1.5mm thick shall be riveted
on valve body at a prominent location.
6. QAP to for Manufacturer, Testing & Inspection :
Sl.
Description of the
By
no
test
manufacturer
By ISRO Representative
Type of
inspection
A
Scope
Testing *
Shell
&
Hydrotest
2.
seat
100%
100%
100%
100%
Review of
certificates
Material
test
( Pneumatic)
C
Painting
Paint
thickness
measurement
Stamping
Review of paint
measurement report
DFT
W-Witness
P-Perform