Professional Documents
Culture Documents
Thermostat 8212-5-0l Removal and Installation
Thermostat 8212-5-0l Removal and Installation
Thermostat 5.0L
Removal
1.
Partially drain the cooling system; refer to the procedure in this section.
2.
Remove the upper radiator hose (8260); refer to the procedure in this section.
3.
Position the hose clamp back and remove the water bypass hose from the water hose connection.
4.
Remove the two bolts from the water hose connection (8592).
5.
Installation
1.
NOTE: Coat the new thermostat gasket with Gasket and Trim Adhesive F3AZ-19B508-B or equivalent meeting Ford specifications ESR-M11P17-A and ESF-M2G52-A prior
to installation.
Install the new thermostat gasket.
2.
Align the notch in the thermostat with the notch in the water hose connection.
3.
4.
2.
5.
Install the upper radiator hose; refer to the procedure in this section.
6.