Professional Documents
Culture Documents
Class Ring
Class Ring
Class Ring
Class Ring
1. Use the Tapered Square Shank to get started. 6mm top thickness,
2mm bottom thickness, 18mm top width, and 8mm bottom width.
2. Draw a 20mm wide rectangle and center it above the silhouette. Use
it as a guideline to create a flat top for the class ring.
6. The quickest way to draw the side panel borders is to draw a single
edge, mirror it, join and close with straight lines. Then mirror to the
other side of the ring.
9. Putting a .1mm bevel on your lettering maes it stand out more. Use
the shape editor with a pyramid limited to .1mm.
11. Then select all the remaining vectors and unselect the outer vector and apply the
shape editor again. 20 degree round and a start height of .1mm.
13. Add a bezel set stone in a 90 degree bezel using the Rotary Flush Setting Tool.
Select position on ring.