Professional Documents
Culture Documents
SuperArc LA-100 Suite
SuperArc LA-100 Suite
SuperArc LA-100 Suite
SuperArc LA-100
Yield
Strength(2)
MPa (ksi)
Tensile
Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ftlbf)
@ -18C (0F) @ -51C (-60F)
Not Specified
Not Specified
Not Specified
Not Specified
Not Specified
Not Specified
Not Specified
Not Specified
565-825 (82-120)
Not Specified
16 min.
81 (60) min.
47 (35) min.
750 (109)
730 (106)
790 (115)
780 (114)
22
20
164 (121)
- -
138 (102)
118 (87)
580 (84)
745 (108)
25
138 (102)
70 (52)
620 (90)
682 (99)
740 (107)
765 (111)
25
20
170 (125)
- -
106 (78)
117 (86)
(3)
Pulse
As-Welded at 110 kJ/in with 95% Ar/5% CO2
CV
As-Welded at 110 kJ/in with 95% Ar/5% CO2
As-Welded at 45 kJ/in with 95% Ar/5% CO2
CTWD(5)
mm (in)
Voltage
(volts)
Approx. Current
(amps)
Melt-Off Rate
kg/hr (lb/hr)
9-12
(3/8-1/2)
2.5 (100)
3.8 (150)
6.4 (250)
18
19
22
80
120
175
0.7 (1.6)
1.1 (2.4)
1.8 (4.0)
Spray Transfer
90% Ar/10% CO2
9-12
(3/8-1/2)
9.5 (375)
12.7 (500)
15.2 (600)
23
29
30
195
230
275
2.7 (6.0)
3.6 (8.0)
4.4 (9.6)
12-19
(1/2-3/4)
5.1 (200)
6.4 (250)
19-21
20-23
130
140
2.4 (5.4)
3.0 (6.7)
Spray Transfer
98% Ar/2% O2
95% Ar/5% CO2
12-19
(1/2-3/4)
8.9 (350)
12.1 (475)
12.7 (500)
27
30
30
285
335
340
4.2 (9.2)
5.7 (12.5)
6.0 (13.2)
12-25 (1/2-1)
12-25 (1/2-1)
5.3 (210)
6.0 (235)
7.4 (290)
25
27
28
325
350
430
4.8 (10.7)
5.4 (12.0)
6.7 (14.8)
Typical all weld metal. (2)Measured with 0.2% offset. (3)See test results disclaimer on pg. 18. (4)CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout.
Procedures in this area are for pulse MIG mode for welding in the vertical up and overhead welding positions. Actual results are dependent on joint, material thickness, as well as wave shape and pulse frequency.
(1)
(5)
W E L D I N G C O N S U M A B L E S C ATA L O G
67