Professional Documents
Culture Documents
BTS3900 Configuration
BTS3900 Configuration
Level: internal
Drafted by
Quan Kuifa
Date
Reviewed by
Date
Approved by
Date
JUN.10.2009
2009-7-2
Page1, Total17
BTS3900 Configuration
Level: internal
This guide instructs that how to configur BTS3900 in the BSC6000.also that
how to implement BTS swap.All the operations is based on the LMT and MML.
The content of this guide is as below:
1, Main process of BTS configuration
2, Alarm configuration for BTS
3, Data configuration for BTS swap
2009-7-2
Page2, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page3, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page4, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page5, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page6, Total17
BTS3900 Configuration
Level: internal
Use the RF cable connection tool to generate the connection. For the site
05503(S4/4/4) is as below:
2009-7-2
Page7, Total17
BTS3900 Configuration
Level: internal
Keep confiuration same with the practical connection.Finally the RXU chain
topo is as below.
2009-7-2
Page8, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page9, Total17
BTS3900 Configuration
Level: internal
Set the Send Receive Mode due to pratical situation. Because just one ANT
port of DRFU is used, the Single Antenna Double Receiver is chosen.
2009-7-2
Page10, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page11, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page12, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page13, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page14, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page15, Total17
BTS3900 Configuration
Level: internal
The exported result is the format of text as above, which will be used to edit the
adjacent cell for BTS3900 later.
Step4: delete the swapped site in online mode
2009-7-2
Page16, Total17
BTS3900 Configuration
Level: internal
2009-7-2
Page17, Total17