The document describes formulas for calculating maximum longitudinal bending stress in two locations of a shell: (1) At the midspan, the stress S1 is calculated using the load Q, shell length L, section modulus Z1, radius R, and depth of head H to determine the bending moment M1. (2) At the plane of the saddle, the stress S1' is calculated using Q, L, Z1, R, H, and an additional bending moment M2 and effective section modulus Z2.
The document describes formulas for calculating maximum longitudinal bending stress in two locations of a shell: (1) At the midspan, the stress S1 is calculated using the load Q, shell length L, section modulus Z1, radius R, and depth of head H to determine the bending moment M1. (2) At the plane of the saddle, the stress S1' is calculated using Q, L, Z1, R, H, and an additional bending moment M2 and effective section modulus Z2.
The document describes formulas for calculating maximum longitudinal bending stress in two locations of a shell: (1) At the midspan, the stress S1 is calculated using the load Q, shell length L, section modulus Z1, radius R, and depth of head H to determine the bending moment M1. (2) At the plane of the saddle, the stress S1' is calculated using Q, L, Z1, R, H, and an additional bending moment M2 and effective section modulus Z2.