Professional Documents
Culture Documents
Electrical Circuits (1:30-3:30 PM) Thursday, October 2, 2014 General Instructions
Electrical Circuits (1:30-3:30 PM) Thursday, October 2, 2014 General Instructions
Data Table:
Table 1. Measured and Calculated Values
Resistor
Measured Current Value
R1
R2
R3
R4
R5
Percent Error
Note: Use another sheet to show the calculations of current in each resistor using KVL/KCL.
Interpretation of Data
(1 paragraph with at least 5 sentences)
Results and Discussions
(Must contain at least 2 paragraphs each with at least 5 sentences.
Cite at least 2 references properly using the appropriate format.)
Conclusion
(1 paragraph with at least 5 sentences)
References
Cite at least 2 references properly using the APA format.
Data Table:
Table 1. Measured and Calculated Values
Resistor
Measured Current Value
R1
R2
R3
R4
R5
Percent Error
Note: Use another sheet to show the calculations of current in each resistor using Maxwells Method.
Interpretation of Data
(1 paragraph with at least 5 sentences)
Results and Discussions
(Must contain at least 2 paragraphs each with at least 5 sentences.
Cite at least 2 references properly using the appropriate format.)
Conclusion
(1 paragraph with at least 5 sentences)
References
Cite at least 2 references properly using the APA format.
Data Table:
Table 1. Measured and Calculated Values
Resistor
Measured Current Value
R1
R2
R3
R4
R5
Percent Error
Note: Use another sheet to show the calculations of current in each resistor using Nodal Method.
Interpretation of Data
(1 paragraph with at least 5 sentences)
Results and Discussions
(Must contain at least 2 paragraphs each with at least 5 sentences.
Cite at least 2 references properly using the appropriate format.)
Conclusion
(1 paragraph with at least 5 sentences)
References
Cite at least 2 references properly using the APA format.
Data Table:
Table 1. Measured and Calculated Values
Resistor
Measured Current Value
R1
R2
R3
R4
R5
Percent Error
Note: Use another sheet to show the calculations of current in each resistor using Nodal Method.
Interpretation of Data
(1 paragraph with at least 5 sentences)
Results and Discussions
(Must contain at least 2 paragraphs each with at least 5 sentences.
Cite at least 2 references properly using the appropriate format.)
Conclusion
(1 paragraph with at least 5 sentences)
References
Cite at least 2 references properly using the APA format.