This document discusses standards for measuring the surface texture of abrasive blast-cleaned steel reinforcing bar. It references the ASME B46.1 surface texture standard and lists the equipment needed as a portable profilometer to record maximum roughness depth and peak count. The materials are an uncoated, recently abrasive blast-cleaned steel reinforcing bar specimen that must not be contaminated in the test area.
This document discusses standards for measuring the surface texture of abrasive blast-cleaned steel reinforcing bar. It references the ASME B46.1 surface texture standard and lists the equipment needed as a portable profilometer to record maximum roughness depth and peak count. The materials are an uncoated, recently abrasive blast-cleaned steel reinforcing bar specimen that must not be contaminated in the test area.
This document discusses standards for measuring the surface texture of abrasive blast-cleaned steel reinforcing bar. It references the ASME B46.1 surface texture standard and lists the equipment needed as a portable profilometer to record maximum roughness depth and peak count. The materials are an uncoated, recently abrasive blast-cleaned steel reinforcing bar specimen that must not be contaminated in the test area.
1 - Surface Texture (Surface Roughness, Waviness, and Lay)
3. EQUIPMENT 3.1. A portable profilometer capable of recording the maximum roughness depth, R (max), and peak count, Pc. 4. MATERIALS 4.1. A sufficient length of uncoated, recently abrasive blast-cleaned, steel reinforcing bar. 4.2. Do not handle directly or otherwise contaminate the area of specimen to be tested
RFP - Acquisition Implementation Training and Maintenance of A Management Action Record System (MARS) - Annex8 - Contractor's Performance Evaluation Form PDF