Professional Documents
Culture Documents
Gantrex Chemical c30
Gantrex Chemical c30
Description
High performance quick curing anchor resin.
Application
Quick anchoring of sole plates supporting rails on concrete floors and beams.
Curing temperature between 5C and 30C. Effective in continuously damp conditions.
Suitable for threaded rods.
Technical characteristics
Yield : please consult us.
Curing times
Temperature
Gel time
Cure time
30C
25C
15C
5C
3 min.
5 min.
10 min.
20 min.
20 min.
30 min.
60 min.
120 min.
Holes diameters
M16
M20
M24
18 mm
24 mm
28 mm
Mechanical characteristics
Calculation details on request.
Packing
Supplied in 380 ml cartridges.
Store life
12 months, in sealed bags, in dry and cool store (between 5C and 25C).
Tooling
Hand extrusion tool (on request) or pneumatic gun.
Tools cleaning
Acetone.
ON REVERSE : Instructions for use
Gantrex S.A. - rue du Commerce 19 - 1400 Nivelles - Belgium - Tel. : +32(0)67.88.80.30 - Fax : +32(0)67.21.63.21
Cartridges preparation
1
Anchors installation
8. Fill in the hole approximately half full.
9. Insert anchor with a twisting motion to expel all possible air bubbles.
Notes
Whilst working on site, avoid exposing the cartridges to direct sun.
Curing must be avoiding bad weather.
Not suitable for anchoring in vertical walls or in ceilings.
We reserve the right to discontinue or change specifications or design at any time without prior notice
and whithout incurring any obligation whatsoever.
09/2009 Rev. 1