Professional Documents
Culture Documents
HM150E Manual
HM150E Manual
Instruction Manual
HM150 Hydraulics Bench
Hydraulics Bench
HM150
Instruction Manual
06/04
HM150
Hydraulics Bench
Table of Contents
1 Technical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Notes on handling and safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Determine volumetric flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 List of experiments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 Contents of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HM150
Hydraulics Bench
Technical Description
The basic Hydraulics Bench and the various ancillary modules available form a comprehensive laboratory facility which enables a detailed
Mechanics of Fluids Laboratory.
The hydraulics bench unit provides the basic services for the pumping and volumetric measurement of the water supply with which all the
additonal accessories and experiments are used.
The working surface of the unit is in fibreglass,
moulded to provide a recessed area on which to
mount experiments. An integral weir tank is provided along with a volumetric measuring tank. The
measuring tank is stepped to enable for accurate
measuring of both high and low flow rates. A level
indicator allows convenient read out of the flow.
The measuring tank discharges into a fibreglass
sump tank via a valve. Overflow pipe is provided.
An electric motor drives a submersible motor driven pump which delivers water to the outlet at the
working surface for connection to the individual
experiments.
Materials used in the bench construction and its
modules have been carefully selected in order to
minimise corrosion problems. The entire unit is
self-contained and mobile. For low volumetric
measurment use the 2ltr. measuring cup.
1 Technical Description
HM150
Hydraulics Bench
Details
12
11
10
2
9
3
8
7
6
1 Technical Description
HM150
Hydraulics Bench
In the event of obvious defects (e.g. split insulation on the electric wires), operation of the
system is potentially fatal. In such cases, shut
down the system immediately.
CAUTION:
HM150
Hydraulics Bench
Commissioning
Switch on pump
kg
The density of water is considerd as = 998 3
m
3 Commissioning
HM150
Hydraulics Bench
List of experiments
5 List of experiments
HM150
Hydraulics Bench
Technical Data
Overall dimension
(L x W x H) 1220 x760x1200
Weight:
125
mm
kg
Pump
Head:
Flow:
H = 11
Q = 230
m
ltr/min
170
ltr
40
10
ltr
ltr
ltr
Beaker:
Stop watch:
7
1/100
Contents of Supply
Basic unit hydraulics bench with the
following components:
1
1
1
1
1
1
1
1
1