Professional Documents
Culture Documents
8d Gestamp Ak 4 Lamination and Inclusions Rev 2
8d Gestamp Ak 4 Lamination and Inclusions Rev 2
8d Gestamp Ak 4 Lamination and Inclusions Rev 2
Page 1 of 4
Form No.: F-034
Revision: 1
Release: 19-Dec-11
8-Discipline Steps
Date Open: 12/3/14
Concern Found:
Part No.: 2123/7478
Responsible
Shift:
Area:
Part Name: F-25 and F-15 BSO
Customer:
BMW
FORM DESCRIPTION
Corrective Action Request (CAR)
Page 2 of 4
Form No.: F-034
Revision: 1
Release: 19-Dec-11
8-Discipline Steps
FORM DESCRIPTION
Corrective Action Request (CAR)
Page 3 of 4
Form No.: F-034
Revision: 1
Release: 19-Dec-11
8-Discipline Steps
to crop out but some were below the surface and did not get cropped out as confirmed in
the Research reports.
D5.: Corrective Action:
Changes to inspection criteria will result in increased stoning frequency at the TM and the CM. Take
every 3rd coil at CM off line to a cradle roll and then stone one roll circumference. Post Cognex
review all future orders and inspect same as a hood outer. New inspection criteria for all body side
outer material ahead of EG was updated on 12/09/14. Quality Alert # 19-QA-14-02 issued to
Precision Strip on 12/5/14 to enhanced inspect for roll marks and laminations and provide samples to
CTS if found.
Management Approvals:
Before you submit the CAR-8D, please ensure the following have been addressed or considered.
Yes
X
No
N/A
FORM DESCRIPTION
Corrective Action Request (CAR)
Page 4 of 4
Form No.: F-034
Revision: 1
Release: 19-Dec-11
8-Discipline Steps
describe & show evidence of applicability. If no, describe reason)?
If a mistake proofing activity was defined can it be applied to similar products or
processes (if yes, describe & show evidence of applicability. If no, describe
reason)?
X
X
Do the actions meet the Containment release requirements (if no, describe
reason)?
Has training occurred to employees & has the verification been confirmed that the
employees trained understood the directive?
Has the surface data, destruct or dimensional data been review & is stable (if no,
describe)?
Other (explain):