Professional Documents
Culture Documents
ANSYS 10.0 Workbench Tutorial - Exercise 1, Workbench Basics
ANSYS 10.0 Workbench Tutorial - Exercise 1, Workbench Basics
Workbench Tutorial
ANSYS
Workbench
Basics
Blue boxes
represent actions
to be taken.
When numbered
they guide you
through the
sequence of the
actions
Orange boxes
present
warnings or
notes of
interest or
importance
Getting Started
Exercise 1 - Outline
1. Enter Sketching
Mode
2006 ANSYS, Inc. All rights reserved.
10
11
12
13
2. Select your
environment in the
outline to define
loads and
constraints
2006 ANSYS, Inc. All rights reserved.
14
15
16
17
Option 2
1. Using the right
mouse button
select:
Insert>Fixed
Support from
the pop-up menu
18
1. Using the
selection
tools
previously
introduced
select the
four
bounding
edges of
the your
plate
19
1. Select a
Pressure
load
from the
Structural
menu or
right
mouse
button
pop-up
20
3. Define the
pressure to be
applied to the
selected
surface(s)
21
22
23
2. From the
Deformation pulldown or right mouse
menu define required
deformation results as
Total
24
25
26
Step 6B
B Reviewing Animation
27
Step 6C - Manipulation
1. Start your
animation
by selecting
Play in the
toolbar
28
29
Step 7B
B Generate a Report
30
Complete
Report
heading
information
31
32
2. Review
your
Report
content
3. Publish or
send your
report to
others for
review in a
Browser (No
ANSYS
License
Required)
33
Congratulations
You have complete Exercise 1 of the ANSYS
ED tutorial
Before you leave the ANSYS Workbench
save the results of this exercise
Return to the Project Page by selecting the
[Project] folder tab
34
Select Save
All from the
File Menu or
toolbar ICON
35
If you wish to exit this session and continue later Exit the Workbench
2006 ANSYS, Inc. All rights reserved.
36