Professional Documents
Culture Documents
Digitally Greenhouse Monitoring and Controlling of System Based On Embedded System
Digitally Greenhouse Monitoring and Controlling of System Based On Embedded System
Digitally Greenhouse Monitoring and Controlling of System Based On Embedded System
PURPOSE:
The purpose of this project is to provide a measurement and control system to continuously
monitor and control equipments for greenhouse automatically using the GSM technology.
METHODOLOGY:
DESCRIPTION:
The goal of the project is to develop a system, which uses Mobile technology that keeps control
of the greenhouse effects by using different sensors. From the sensors soil moisture, temperature, LDR,
humidity quantities are measured and given to the ADC. ADC will convert the analogical values into
digital format and forwards to the controller.
Microcontroller will process this information and it will compare with the predefined data. If the
values read from the ADC exceeds the predefined values then microcontroller turn ON corresponding
devices.
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
BLOCK DIAGRAM:
POWER SUPPLY
LCD
LDR
WATER MOTOR
MICRO
CONTROLLER
TEMPERATURE
SENSOR
SPAYER
COOLER
HUMIDITY
SENSOR
LIGHTS
SOFTWARES:
1. Embedded C
2. Keil IDE
3. Uc-Flash
HARDWARES:
1. Micro controller.
2. Power supply.
3. Temperature sensor.
4. LDR.
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
5. Humidity sensor.
6. Water motor.
7. Sprayer.
8. Cooler.
9. Lights.
RESULT:
By using this project we can implement remote measurement and control system for
greenhouse.
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606