Professional Documents
Culture Documents
3332 E Automation Technology With Siemens PLC PDF
3332 E Automation Technology With Siemens PLC PDF
3332 E Automation Technology With Siemens PLC PDF
Automation technology
Automation technology
Due to the growing importance of process automation the area of automation technology is taking on an ever
greater role in industrial operations. This applies both for standard operations in production as well as for
vocational training. Today automation technology almost always involves drive technology, closed-loop control
and computer engineering. Due to the rapid developments in microcontroller and computer technology,
automation has become one of the most innovative and breathtaking of all the areas of electrical engineering
and electronics. Add to that the fact that novel industrial solutions like decentralisation and visualisation require
new vocational training systems. Furthermore, the hitherto sheer multitude of manufacturer-dependent software
products has been replaced by the international standard IEC1131-3. Contemporary programmable logic controls
will now be programmed in accordance with standardised rules. All of these demands mean that there is a need
to have the automation technician of today trained on practice-oriented training systems which convey to the
student both the latest technology but also endow him or her with the required skills and competency.
Page 1/122
www.lucas-nuelle.com
Page 2/122
www.lucas-nuelle.com
Page 3/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3713-8L
Anz.
1
Important note:
This item can only be ordered upon submission of a supplementary
licence agreement covering schools and training centres (including
commercial use).
Page 4/122
www.lucas-nuelle.com
SO3713-5E
Software:
Pos.
Product name
Bestell-Nr.
SO6002-1Q
Anz.
1
Page 5/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SO6200-5A
SO6200-5B
SO5155-1M
SO5155-1N
Page 6/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
ST7200-3A
Anz.
1
Page 7/122
www.lucas-nuelle.com
ST8010-9Y
Page 8/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3713-8Q
Anz.
1
Ethernet switch:
All equipment can be easily combined in a network via the
integrated four-way Ethernet switch.
Important note:
Items may only be ordered upon proof of a supplementary
licensing agreement for schools and training centres (including
commercial training facilities).
Page 9/122
www.lucas-nuelle.com
CO3713-8N
CO3713-8P
Page 10/122
www.lucas-nuelle.com
Software:
Pos.
Product name
Bestell-Nr.
SO6002-1Q
Anz.
1
Page 11/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
ST7200-3A
Anz.
1
Page 12/122
www.lucas-nuelle.com
ST8010-9Y
Page 13/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
16 SIMATIC S7-1516-3 PN/DP 32 DE, 32 DA, 8 AE, 4 AA, 24V / 6 A power CO3713-8R
supply
Anz.
1
Wichtiger Hinweis:
Artikel kann nur nach Vorlage einer ergnzenden
Lizenzvereinbarung fr Schulen und Ausbildungssttten (auch
gewerblicher Bereich) bestellt werden.
Page 14/122
www.lucas-nuelle.com
Software:
Pos.
Product name
Bestell-Nr.
SO6002-1Q
Anz.
1
Page 15/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
ST7200-3A
Anz.
1
Page 16/122
www.lucas-nuelle.com
ST8010-9Y
Page 17/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3715-1A
Anz.
1
Page 18/122
www.lucas-nuelle.com
CO3715-1B
CO3715-1C
Page 19/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
SH5004-6B
Anz.
1
Training contents:
Brief description
Technical data
Pin assignment
Assembly plan
Template overview
Experiment descriptions
Road-works traffic lights
Star-delta starter
Dahlander pole-changing switch
Starter control
Monitor equipment
Tank filling system
Two-door access control system
Switching platform
Buffer store simulation
Level control
Mixer
Compressed air net
Page 20/122
www.lucas-nuelle.com
SH5004-6C
Training contents:
Brief description
Technical data
Pin assignment
Assembly plan
Template overview
Experiment descriptions
Cleaning system
Furnace door control
Bending tool
Embossing machine
Drilling tool
Selective belt switch
Pipe bending machine
Gate control system
Pump control 1
Pump control 2
Reaction vessel
Automatic tablet filler
Accessories:
Pos.
Product name
Bestell-Nr.
SO5145-5B
Anz.
1
Page 21/122
www.lucas-nuelle.com
SO5126-8A
CO3713-7G
Page 22/122
www.lucas-nuelle.com
Page 23/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3715-1H
Anz.
1
Page 24/122
www.lucas-nuelle.com
Software:
Software for creating your own process models:
Pos.
Product name
Bestell-Nr.
SO6001-6C
Anz.
1
Page 25/122
www.lucas-nuelle.com
SO6001-6E
Page 26/122
www.lucas-nuelle.com
SO6001-6G
Page 27/122
www.lucas-nuelle.com
SO6001-6J
Page 28/122
www.lucas-nuelle.com
SO6001-6L
Page 29/122
www.lucas-nuelle.com
SO6001-6S
Betriebssystem:
PRO/TRAIN ist unter allen Windowsversionen lauffhig
Page 30/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9040
SO5145-5B
CO3713-7G
Additionally recommended
Pos.
Product name
Bestell-Nr.
LM9062
Anz.
1
Page 31/122
www.lucas-nuelle.com
Page 32/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
39 Compact level control kit including vessel, tank, pump and sensors CO3620-1H
Anz.
1
Page 33/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
40 Manual IAC 10/11, Level and flow control kit with digital controller
SH5003-6A
Anz.
1
Training contents:
Automatic liquid-level control
Set-up, operation and optimisation of an automatic liquidlevel control with variable controlled system characteristics
PI and PID controller in a closed-loop control system of the
first and higher orders
Page 34/122
www.lucas-nuelle.com
Power supply:
Pos.
Product name
Bestell-Nr.
CO3538-8A
Anz.
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
LM2330
Anz.
1
Page 35/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
SO5126-9U
SO5126-9V
SO5126-9Y
SO5126-9R
SO5148-2A
Page 36/122
www.lucas-nuelle.com
Page 37/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
SO2800-4M
Anz.
1
Page 38/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM8848
Anz.
1
Page 39/122
www.lucas-nuelle.com
LM8839
Accessories:
If there is no compressed air supply available, we recommend the following accessories for the pneumatic PLC
application models:
Pos.
Product name
Bestell-Nr.
Anz.
CO3713-7G
SO5145-5B
System connector module to extend the basic unit for SIMATIC S7300 controls for the simple connection of process models without
having to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)
1 37 pin sub-D socket (output signals)
Dimensions: 125 x 65 x 25mm (HxWxD)
Page 40/122
www.lucas-nuelle.com
53 Compressor, low-noise
SE2902-9L
SE2902-9A
SE2902-9C
Page 41/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
SH5004-6E
Anz.
1
Training contents:
General introduction
Control of a stamping machine using PLC
Product name
Bestell-Nr.
Anz.
SO3713-7Y
SO3713-7Z
Page 42/122
www.lucas-nuelle.com
Page 43/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM9545
Anz.
1
Weight: 4.2kg
Accessories:
Pos.
Product name
Bestell-Nr.
CO3713-7F
Anz.
1
Page 44/122
www.lucas-nuelle.com
LM9061
LM9040
Page 45/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SH5004-6D
SO6200-5G
Training contents:
General introduction
Lift control via PLC
Introduction
System and performance specifications
Layout and wiring plan
Creating a project with the SIMATIC Manager
Assignment list
Exercise 1: Door control
Exercise 2: Cab control
Exercise 3: 2-floor elevator control
Exercise 4: 3-floor elevator control
Exercise 5: Sequence with door control
Exercise 6: Lift control requirements
Page 46/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
SO3713-7Y
SO3713-7Z
Page 47/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM9542
Anz.
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
CO3713-7F
LM9061
Page 48/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
SO3713-7Y
SO3713-7Z
Page 49/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM8856
Anz.
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
CO3713-7G
SO5145-5B
System connector module to extend the basic unit for SIMATIC S7300 controls for the simple connection of process models without
having to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)
1 37 pin sub-D socket (output signals)
Dimensions: 125 x 65 x 25mm (HxWxD)
Page 50/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
SO3713-7Y
SO3713-7Z
Page 51/122
www.lucas-nuelle.com
CAS 1 AS interface
CAS 1 AS interface
The actuator-sensor interface (AS interface) is an open networking system, standardised according to IEC62026
and EN 50295 for the lowest fieldbus level and supported by more than 100 manufacturers. One essential
characteristic of the AS interface is the use of a common two-wire bus for data transfer and the distribution of
auxiliary power to sensors and actuators. For this purpose, an AS power supply must be used that can fulfil the
requirements for the transfer mode of the AS interface. In order to connect the devices a mechanically coded
AS-interface profiled cable is used that is proof against reversal of polarity. By means of insulation displacement
connection technology any device may be connected without any need for insulation stripping tools. The AS
interface is used where individual actuators and sensors are distributed over a wide area of a machine or plant
and a direct fieldbus connection has hitherto been impossible to implement either for technical reasons or for
reasons of cost. It can do away with the need for the complex wiring of control cables and distributor panels.
Service and maintenance requirements are also considerably reduced. Due to such possibilities for savings and
its simple installation and commissioning, the actuator-sensor interface has already become a widely used
standard in automatation technology. The modular AS interface training system contains a representative and
economical selection of AS-i devices. Industrial components are used exclusively and the devices are connected
in many cases using the original AS-interface profiled cable in order to advance the students' familiarity with the
equipment and convey the necessary practical skills for its use. The course concentrates on the following
topics: Connecting and installing AS interface devices Addressing AS interface devices and incorporating them
into the bus structure Developing and analysing application programmes Design programming and analysis of
control circuits Use of the AS-interface addressing and diagnostic equipment
Page 52/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
SO3713-5K
CO3715-5A
CO3715-5F
Page 53/122
www.lucas-nuelle.com
SO3715-5K
CO3715-7L
Page 54/122
www.lucas-nuelle.com
CO3715-5M
LM9650
Page 55/122
www.lucas-nuelle.com
LM9606
LM9040
Page 56/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9190
LM9191
LM8150
SO5148-2H
Page 57/122
www.lucas-nuelle.com
Page 58/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM9606
Anz.
1
Page 59/122
www.lucas-nuelle.com
LM9677
LM9650
LM9188
Page 60/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3713-8Q
Anz.
1
Ethernet switch:
All equipment can be easily combined in a network via the
integrated four-way Ethernet switch.
Important note:
Items may only be ordered upon proof of a supplementary
licensing agreement for schools and training centres (including
commercial training facilities).
Page 61/122
www.lucas-nuelle.com
CO3713-8N
CO3713-8P
Page 62/122
www.lucas-nuelle.com
SO6002-1Q
Page 63/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SO2800-5W
SO6200-1A
Training contents:
Fundamentals of TIA Portal
Programming of a conveyor using I/O
Fundamentals of an AS-i bus
Programming of a conveyor using AS-i
Fundamentals of PROFIBUS
Programming of a conveyor using PROFIBUS
Fundamentals of PROFINET
Programming of a conveyor using PROFINET
Accessories:
Pos.
Product name
Bestell-Nr.
LM9620
Anz.
1
Page 64/122
www.lucas-nuelle.com
LM9040
LM9180
LM9185
LM9186
LM9189
Page 65/122
www.lucas-nuelle.com
LM9187
SO5126-9F
SO5126-9K
SO5126-9H
SO5126-8K
Page 66/122
www.lucas-nuelle.com
SO5126-8P
Page 67/122
www.lucas-nuelle.com
IMS furniture
IMS furniture
The IMS furniture system is used together with the Industrial Mechatronics System. The mobile trolleys can be
used for individual components or sub-systems. In order to build complex, mechatronics systems, the trolleys
can be lined up alongside one another and can be supplemented by frames to accommodate training panels. A
power console allows the trolley to be equipped with a wide variety of 3 HU modules. The trolleys can be
extended by means of various add-ons attachable to the aluminium rails to make up a multi-function PC
experiment trolley.
Pos.
Product name
Bestell-Nr.
Anz.
ST7200-3T
Page 68/122
www.lucas-nuelle.com
Page 69/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3713-4P
Anz.
1
Important notes:
- The TP 700 can only be programmed and incorporated into
projects using WinCC Comfort, Advanced, Professional (TIA
Portal).
- The item can only be ordered on submission of a
supplementary license agreement for schools and other
educational establishments (even for commercial customers).
Accessories:
Pos.
Product name
Bestell-Nr.
SO5126-9U
Anz.
1
Page 70/122
www.lucas-nuelle.com
SO5126-9V
LM9181
LM9182
Media:
Pos.
Product name
Bestell-Nr.
SO6200-5H
Anz.
1
Page 71/122
www.lucas-nuelle.com
CDP 1 PROFIBUS-DP
CDP 1 PROFIBUS-DP
In order to drastically reduce the wiring and maintenance effort needed in production facilities, more and more
companies are turning to standardised fieldbus systems to couple components. This allows for a decentralised
arrangement of the automation equipment, i.e. in the direct vicinity of the sensor and actuator components. This
makes expensive and time consuming parallel wiring to the individual actuators and sensors in the field area
redundant. This leads to considerably less system installation and commissioning times.
Thanks to the standardised, open fieldbus protocols, systems from the most varied of manufacturers can
communicate with each other. All of the automation components like PLC units, PCs, operating and monitoring
equipment such as sensors and actuators can exchange data via the fieldbus.
To fulfill demands for real-time process automation, a fieldbus with high speed transmission. The PROFIBUS-DP
fieldbus, which is used in this equipment set is commonly used in industry and for the student constitutes an
authentic application used in automatic control engineering.
Product name
Bestell-Nr.
CO3713-6D
Anz.
1
Page 72/122
www.lucas-nuelle.com
Additionally recommended
Pos.
Product name
Bestell-Nr.
Anz.
LM9606
LM9182
Page 73/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
SO5155-1Q
Anz.
1
Accessories:
Pos.
Product name
Bestell-Nr.
LM9180
Anz.
1
PROFIBUS line with two terminals for the connection of Master and
Slave units.
Length 1.5 m, not suitable for looping through.
Page 74/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
CO3713-6E
CO3715-7A
Page 75/122
www.lucas-nuelle.com
CO3715-7B
LM9188
Page 76/122
www.lucas-nuelle.com
LM9606
Accessories:
Pos.
Product name
Bestell-Nr.
LM9185
Anz.
10
Page 77/122
www.lucas-nuelle.com
LM9186
Page 78/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
LM9606
Anz.
8
Page 79/122
www.lucas-nuelle.com
LM9611
LM9680
Gravity-feed magazine
Micro switch for monitoring magazine level
Two-way stop cylinder
Magnetic end-limit sensor
1 x Sorting cylinders
1 x 3/2 way valves
1 x 4/2-way valve
Pneumatic valve block
PLC interface: 25-pin SUB-D connector
PLC requirements: 2 x digital outputs, 2 x digital inputs
Page 80/122
www.lucas-nuelle.com
LM9681
LM9682
Station with fully automatic feed, sorting and assembly of top section
workpieces. In conjunction with a conveyor belt, the station
accomplishes a portion of an assembly process for an end product
made of three separate components.
Gravity-feed magazine
Micro switch for monitoring magazine level
Two-way stop cylinder
Magnetic end-limit sensor
2 x Sorting cylinders
1 x 3/2 way valves
1 x 4/2-way valve
Pneumatic valve block
PLC interface: 25-pin SUB-D connector
PLC requirements: 2 x digital outputs, 2 x digital inputs
Page 81/122
www.lucas-nuelle.com
LM9683
CO3715-7F
Page 82/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
138 SIMATIC S7-314C-2 PN/DP 24 DI, 16 DO, 4 AI, 2 AO, 24V / 6 A power
supply
CO3713-8L
Anz.
1
Important note:
This item can only be ordered upon submission of a supplementary
licence agreement covering schools and training centres (including
commercial use).
Page 83/122
www.lucas-nuelle.com
CO3713-7F
CO3713-4P
Important notes:
- The TP 700 can only be programmed and incorporated into
projects using WinCC Comfort, Advanced, Professional (TIA
Portal).
- The item can only be ordered on submission of a
supplementary license agreement for schools and other
educational establishments (even for commercial customers).
Page 84/122
www.lucas-nuelle.com
SO6002-1Q
Page 85/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SO2800-5V
SO2800-5A
Training contents:
Generating controlled movements along an axis
Incremental positioning of a workpiece carrier
Interlocking of forward motion and reverse motion
Programming slip and standstill monitoring
Working with different safety and interlocking circuits
Understanding how sensors function and operate
Connecting and using a PROFIBUS DP field bus system
Page 86/122
www.lucas-nuelle.com
SO2800-5C
SO2800-5D
Training contents:
Assembly, set-up and testing of pneumatic cylinders and
valves
Introduction to sub-systems for workpiece substructures
Defining processes for sorting
Programming of production sequences in manual and
automatic modes
Training contents:
Assembly, set-up and testing of pneumatic cylinders and
valves
Introduction to sub-systems for workpiece superstructures
Defining processes for assembly
Programming of production sequences in manual and
automatic modes
Page 87/122
www.lucas-nuelle.com
SO2800-5E
SO2800-5G
Training contents:
Assembly, set-up and testing of pneumatic cylinders and
valves
Identification of workpieces
Monitoring of process steps
Definition of a process sequence for simple workpiece
processing
Programming of production sequence in manual and
automatic modes
Training contents:
Assembly, set-up and testing of pneumatic cylinders and
valves
Vacuum generator, suction mechanism with sensors
Definition of process sequence for simple workpiece sorting
Set-up and control of a pneumatic linear unit
Programming of sorting sequence in manual and automatic
modes
Page 88/122
www.lucas-nuelle.com
SH5004-8H
SO6200-1A
SO6200-1C
SO6200-1D
Training contents:
Reading and writing RFID tags
Using various RFID modules
Fundamentals of network technology and practical
applications using experiment set-ups
Data transmission using TCP/IP
PROFINET
Diagnostics
Page 89/122
www.lucas-nuelle.com
SO6200-1E
SO6200-1G
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9620
LM9621
Page 90/122
www.lucas-nuelle.com
LM9622
LM9623
LM9624
LM9625
LM9626
Material: plastic
Colour: black
Magnetic clip for attachment to bottom section
Spring-loaded bearing for attaching bolt
Dimensions (L x W x H): 100 x 50 x 40 mm
Page 91/122
www.lucas-nuelle.com
LM9181
15
LM9182
LM9184
LM9061
Page 92/122
www.lucas-nuelle.com
SE2902-9L
LM9670
SO5126-9A
Page 93/122
www.lucas-nuelle.com
SO5126-8U
SO5126-9U
SO5126-9V
Page 94/122
www.lucas-nuelle.com
IMS furniture
IMS furniture
The IMS furniture system is used together with the Industrial Mechatronics System. The mobile trolleys can be
used for individual components or sub-systems. In order to build complex, mechatronics systems, the trolleys
can be lined up alongside one another and can be supplemented by frames to accommodate training panels. A
power console allows the trolley to be equipped with a wide variety of 3 HU modules. The trolleys can be
extended by means of various add-ons attachable to the aluminium rails to make up a multi-function PC
experiment trolley.
Pos.
Product name
Bestell-Nr.
Anz.
ST7200-3T
Page 95/122
www.lucas-nuelle.com
ST7200-3U
CID 1 - RFID
CID 1 - RFID
Standing for Radio Frequency Identification, RFID involves contactless identification and localization of objects
and permits automatic detection, storage and networking of digital data.
The "RFID" training system is a practical environment for learning how pallets at an automation facility are
identified by means of system function modules. The system can also be used to provide instruction in network
configuration by means of PROFINET.
Page 96/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3715-7F
Anz.
1
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SH5004-8H
SO5155-1Q
Training contents:
Reading and writing RFID tags
Using various RFID modules
Fundamentals of network technology and practical
applications using experiment set-ups
Data transmission using TCP/IP
PROFINET
Diagnostics
Page 97/122
www.lucas-nuelle.com
SO6200-5E
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9185
LM9186
Page 98/122
www.lucas-nuelle.com
LM9606
LM9620
Page 99/122
www.lucas-nuelle.com
LM9180
SO5126-9A
SO5126-8U
PROFIBUS line with two terminals for the connection of Master and
Slave units.
Length 1.5 m, not suitable for looping through.
Page 100/122
www.lucas-nuelle.com
Optional Accessories:
Pos.
Product name
Bestell-Nr.
CO3715-7A
Anz.
1
Page 101/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
Anz.
CO3636-5G
LM8926
Page 102/122
www.lucas-nuelle.com
CO3636-5V
SE2673-1K
SE2662-2A
SE2662-7B
Page 103/122
www.lucas-nuelle.com
SE2664-1A
SE2664-1F
SE2664-1J
SE2664-1M
SE2664-1Q
Page 104/122
www.lucas-nuelle.com
CO3713-4P
LM9181
LM9182
Important notes:
- The TP 700 can only be programmed and incorporated into
projects using WinCC Comfort, Advanced, Professional (TIA
Portal).
- The item can only be ordered on submission of a
supplementary license agreement for schools and other
educational establishments (even for commercial customers).
Page 105/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
SH5004-6L
Anz.
1
Training contents:
Required components and devices
Warnings
Introduction
Open-loop control using fixed frequencies
Open-loop control with analog set-point value generation
Open-loop control with analog set-point value, operation
performed via operator panel
Open-loop control via PROFIBUS DP
Software:
Pos.
Product name
Bestell-Nr.
LM8925
Anz.
1
Page 106/122
www.lucas-nuelle.com
LM9028
Power supply:
Pos.
Product name
Bestell-Nr.
CO3212-5U
Anz.
1
Mains power supply for DC, AC and three-phase current and for
excitation of synchronous machines. The mains supply is
specially designed for use with electrical machines.
Outputs:
Three phase: L1, L2, L3, N from 4 mm safety sockets
DC: 0...240VDC variable, controlled and electronically
protected against overload and short circuits.
Output current: 3...10A (adjustable current limiting)
Second DC supply ca. 210VDC, 6A fixed
Protective systems:
Motor protection switch adjustable from 6.3...16A
Undervoltage trip
Safety cut-out
Mains connection: 3x 230/400V, 50/60Hz via CEE plug
with 1.8m mains lead
Dimensions: 297 x 228 x 140mm (HxWxD)
Weight: 3kg
Page 107/122
www.lucas-nuelle.com
Measuring instruments:
Pos.
Product name
Bestell-Nr.
CO5127-1Z
Anz.
1
Page 108/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
SO5148-2H
SO5126-9X
15
SO5126-9Z
LM9184
Page 109/122
www.lucas-nuelle.com
Additionally recommended
Page 110/122
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
208 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
Anz.
1
Page 111/122
www.lucas-nuelle.com
CPN 1 PROFINET
CPN 1 PROFINET
Ethernet has become an established communications standard and an integral part of our office environment.
The demands made on industrial communications are very much greater. For example, industrial requirements
call for real time capability, the integration of decentralised field units or industrial wiring installation technology.
These requirements can be met by PROFINET, the open and multi-vendor industrial Ethernet standard, which
thereby guarantees universal communication from the office environment all the way down to field-bus level.
Page 112/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3713-6E
Anz.
1
Additionally recommended
Pos.
Product name
Bestell-Nr.
LM9056
Anz.
1
Page 113/122
www.lucas-nuelle.com
LM9606
LM9188
Page 114/122
www.lucas-nuelle.com
LM9057
1x 1m yellow
2x 2m yellow
Media:
Pos.
Product name
Bestell-Nr.
SO5155-1Q
Anz.
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9185
LM9186
LM9189
Page 115/122
www.lucas-nuelle.com
LM9187
CPN 2 IWLAN
CPN 2 IWLAN
WLAN wireless radio technology has been further developed for use in industry, resulting in the so-called IWLAN
(Industrial Wireless Local Area Network) technology. Data can be transmitted reliably for industrial purposes
anywhere in the world and machines can be remotely controlled with no contact.
IWLAN should be utilised when data rates are higher than usual, as is common in industrial applications. This
prevents bottlenecks occurring, which might result, for example, in a robot receiving an instruction to work on an
item too late. Software techniques have been used to ensure that that fixed bandwidths are reserved, e.g. for
control signals. Multiple antennae ensure stability of the radio connection, while a clever encoding system
makes certain data is secure.
Product name
Bestell-Nr.
CO3715-7C
Anz.
1
Page 116/122
www.lucas-nuelle.com
CO3715-7D
Media:
Pos.
Product name
Bestell-Nr.
SO6200-5D
Anz.
1
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9185
LM9186
Page 117/122
www.lucas-nuelle.com
Product name
Bestell-Nr.
CO3715-7E
Anz.
1
Page 118/122
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
Anz.
SH5004-8J
SO6200-5F
Training contents:
Configuration via training instead of programming
Stand-alone operation
Linkage to PROFIBUS DP/PROFINET
WinCC integration
Remote diagnostics
Fundamentals of network technology and practical
applications using experiment set-ups
Page 119/122
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
LM9606
LM9620
Page 120/122
www.lucas-nuelle.com
LM9621
LM9624
LM9181
LM9182
LM9184
Material: plastic
Colour: white
Magnetic clip for attachment to bottom section
Spring-loaded bearing for attaching bolt
Dimensions (L x W x H): 100 x 50 x 40 mm
Page 121/122
www.lucas-nuelle.com
SO5126-9A
SO5126-8U
Page 122/122
www.lucas-nuelle.com