Professional Documents
Culture Documents
Flame Test Lab Poster
Flame Test Lab Poster
Abstract:
The elements produce different types of
colours when in heat. The Flame Test lab is
about finding the elements in the solution
provided and testing to see what the colour
will be for that certain element. The change in
energy levels of the electrons are also
observed in this lab and is part of the
introduction of electron configuration. There
was a given element and we had to conclude
what else was mixed with it to create that
certain colour of flame.
Methods:
Our research came from the
knowledge that we have just learned
from the previous lesson, as well as the
notes that we were able to take, and the
instructions/data provided on the lab
packet. We collected our data with the
table provided in the lab packet and
using the element table.
Results
Conclusions
Objectives:
For the Flame Test lab, the whole
purpose was to find out what color will
be produced with the stick that has the
solution which will help determine the
color of the flame based on the
compound it has. When the stick has not
yet been heated, it is referred as the
ground state. It is simply saying that the
energy level of the electrons are at its
lowest. When it is finally heated and the
flame lights up in a different colour, the
electrons energy level is excited and has
moved up an orbital (further away from
the nucleus). The colour will then
determine what element the solution
contains.
Lab Choice:
Flame Test Lab
Discovered mixtures
Two unknown mixtures to be found