Professional Documents
Culture Documents
PERMAX No.3000 S: Issued Date:Jan., 2006
PERMAX No.3000 S: Issued Date:Jan., 2006
PERMAX No.3000 S: Issued Date:Jan., 2006
: 6 0 5 0 - K
Issued Date : Jan., 2006
PERMAX No.3000 S
(PM 3000 S)
PERMAX No.3000 S, based on a combination of epoxy resin with glass-flake and polyamide resin, has
excellent physical properties such as adhesion, toughness and abrasion resistance, etc., and chemical
resistance to salt water, fresh water, crude oil, alkalis and weak acids.
It is suitable for protective coating of splash zones, underwater areas and tank interiors.
A film thickness of over 500 microns can be built in one application by airless spray.
TECHNICAL DATA
Type
Recommended Use
Mixing Ratio
Color
Flash Point
Solids by Volume
Coverage(Theoretical)
Wet Film Thickness
Dry Film Thickness
Drying Time
(at D.F.T. 500)
Painting Interval
(at D.F.T. 500)
Pot Life
Thinner
Method of Application
Condition of Application
The information given in this sheet is effective at the date shown above and subject to revision from time to time without notice.