An Arduino-based temperature control system using a PID or fuzzy control algorithm is proposed that measures both temperature and humidity using sensors. The Arduino interfaces with a PC running LabVIEW software, which implements the control algorithm, displays and records temperature and humidity data over time, and allows the temperature set-point to be controlled.
An Arduino-based temperature control system using a PID or fuzzy control algorithm is proposed that measures both temperature and humidity using sensors. The Arduino interfaces with a PC running LabVIEW software, which implements the control algorithm, displays and records temperature and humidity data over time, and allows the temperature set-point to be controlled.
An Arduino-based temperature control system using a PID or fuzzy control algorithm is proposed that measures both temperature and humidity using sensors. The Arduino interfaces with a PC running LabVIEW software, which implements the control algorithm, displays and records temperature and humidity data over time, and allows the temperature set-point to be controlled.
algorithm The following points should be noted 1.Arduino Uno(10 bit) interfacing board should be used. 2.Humidity sensor should be included and humidity should be measured along with temperature. 3. PID/Fuzzy control should be implemented only through LABVIEW software installed in the PC. 4. Display and recording of temperature and humidity datas over a period of time along with the present readings should be done on the PC with the labview software. 5. Temperature set-point should be controlled through labview.