Two high rolling mills and two/four high rolling mills are available for hot and cold rolling of ferrous and non-ferrous metals. The two high rolling mills have 6-inch diameter rolls and can roll materials up to 50mm thick, while the two/four high mill has 2.5-10 inch rolls. The mills were made by Hydropress, Inc. and Albert Mann's Engineering Co. and are located at the MST facility.
Sexton's Pocket-Book for Boiler-Makers and Steam Users: Comprising a Variety of Useful Information for Employer and Workmen, Government Inspectors, Board of Trade Surveyors, Engineers in Charge of Works and Ships, Foreman of Manufactories, and the General Steam-Using Public
Two high rolling mills and two/four high rolling mills are available for hot and cold rolling of ferrous and non-ferrous metals. The two high rolling mills have 6-inch diameter rolls and can roll materials up to 50mm thick, while the two/four high mill has 2.5-10 inch rolls. The mills were made by Hydropress, Inc. and Albert Mann's Engineering Co. and are located at the MST facility.
Two high rolling mills and two/four high rolling mills are available for hot and cold rolling of ferrous and non-ferrous metals. The two high rolling mills have 6-inch diameter rolls and can roll materials up to 50mm thick, while the two/four high mill has 2.5-10 inch rolls. The mills were made by Hydropress, Inc. and Albert Mann's Engineering Co. and are located at the MST facility.
Two high rolling mills and two/four high rolling mills are available for hot and cold rolling of ferrous and non-ferrous metals. The two high rolling mills have 6-inch diameter rolls and can roll materials up to 50mm thick, while the two/four high mill has 2.5-10 inch rolls. The mills were made by Hydropress, Inc. and Albert Mann's Engineering Co. and are located at the MST facility.
Specification:-It is related to the area of Materials
Processing Research Area:- Metal Forming Resolution & Range:- 2 High Rolling Mill (6" diameter & 8" face rolls), and 2/4 High rolling mill (2.5/10"
Two high rolling mill: A two high rolling mill for
hot and cold rolling for ferrous and non-ferrous metals was built by Hydro-press.Inc. The mill stand shown has a pair of 6in. diameter x 10in. face rolls made of special harden forged steel to with stand hot or cold rolling. Maxim roll gap is 50mm.
Equipment location:- MST
Make & Model:- 2 high rolling mills, Hydropress, INC, New York 22, and 2/4 high rolling mill, Albert Mann's Engg. Co. Ltd. Basildon Industrial Estate - Essex, England.
Two as well as four high rolling mill: A two as
well as four high rolling mill have been used for hot and cold rolling of ferrous and nonferrous metals. The size of the rolls is a pair of 3.5in. & 18in. diameter X 20 in. face rolls. The capacity of machine is 100 ton. Maxim roll gap is 50mm.
Contact:-
Director , National Metallurgical
Laboratory, Jamshedpur
Contact ID:-
director@nmlindia.org
Contact No:-
0657- 2345202/28
Application:-Rolling ferrous as well as non ferrous
Sexton's Pocket-Book for Boiler-Makers and Steam Users: Comprising a Variety of Useful Information for Employer and Workmen, Government Inspectors, Board of Trade Surveyors, Engineers in Charge of Works and Ships, Foreman of Manufactories, and the General Steam-Using Public