Professional Documents
Culture Documents
MSDS Katalco - 61 1T
MSDS Katalco - 61 1T
MSDS Katalco - 61 1T
PRODUCT NAME:
PRODUCT USE:
Hydrotreating of hydrocarbons
Address/Phone No.:
2. COMPOSITION/INFORMATION ON INGREDIENTS
PRODUCT DESCRIPTION
Oxides of nickel and molybdenum on aluminium oxide
HAZARDOUS INGREDIENT(S)
CAS No.
001313-99-1
001313-27-5
001344-28-1
%
(w/w)
<25
>20
Symbol
R Phrases
T
Xn
R49, 43, 53
R36/37, 48/20/22
3. HAZARDS IDENTIFICATION
This health hazard assessment is based on a consideration of the composition of this product.
EC Classification:
(Revision 05 - UK00)
(Date: 10/04)
(Page: 1 / 6)
4. FIRST-AID MEASURES
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Inhalation:
Skin Contact:
Eye Contact:
Ingestion:
5. FIRE-FIGHTING MEASURES
Non-combustible.
Discharged catalyst may be pyrophoric (see Process Hazards).
Extinguishing Media:
Fire Fighting Protective Equipment:
(Date: 10/04)
(Page: 2 / 6)
7.2 STORAGE
The catalyst should be stored in sealed containers in accordance with the advice given in the Johnson Matthey
publication 'Catalyst Handling'.
Notes
MEL
OES
OES
OES
(Revision 05 - UK00)
extrudates
green
odourless
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
No data.
Not applicable.
insoluble
Soluble in: mineral acids
Not applicable.
Not applicable.
0.5 - 0.9
Not applicable.
Not applicable.
(Date: 10/04)
(Page: 3 / 6)
See Process Hazards section for hazards associated with the discharged
catalyst resulting from its intended use.
None known.
(Revision 05 - UK00)
(Date: 10/04)
(Page: 4 / 6)
16 08 02
Safety Phrases:
(Revision 05 - UK00)
(Date: 10/04)
(Page: 5 / 6)
Information in this publication is believed to be accurate and is given in good faith, but it is for the Customer to satisfy
itself of the suitability for its own particular purpose. Accordingly, Johnson Matthey plc gives no warranty as to the
fitness of the Product for any particular purpose and any implied warranty or condition (statutory or otherwise) is
excluded except to the extent that such exclusion is prevented by law. Freedom under Patent, Copyright and Designs
cannot be assumed.
It is the policy of Johnson Matthey Catalysts to update this information regularly. You are therefore advised to check that
this sheet is the most recent issue.
KATALCO is a trade mark of the Johnson Matthey Group of Companies.
'Catalyst Care' is a service mark of the Johnson Matthey Group of Companies.
Johnson Matthey Catalysts is a trading division of Johnson Matthey plc, Registered Office : 2-4 Cockspur Street,
Trafalgar Square, London, SW1Y 5BQ.
(Revision 05 - UK00)
(Date: 10/04)
(Page: 6 / 6)