Professional Documents
Culture Documents
Single-Channel: 6N137, Hcpl2601, Hcpl2611 Dual-Channel: Hcpl2630, Hcpl2631 High Speed 10Mbit/S Logic Gate Optocouplers
Single-Channel: 6N137, Hcpl2601, Hcpl2611 Dual-Channel: Hcpl2630, Hcpl2631 High Speed 10Mbit/S Logic Gate Optocouplers
Single-Channel: 6N137, Hcpl2601, Hcpl2611 Dual-Channel: Hcpl2630, Hcpl2631 High Speed 10Mbit/S Logic Gate Optocouplers
Description
Applications
Schematics
Package Outlines
8 VCC
N/C 1
8 VCC
+ 1
VF1
+ 2
7 VE
_ 2
6 VO
7 V01
VF
_
V
5 GND
N/C 4
6N137
HCPL2601
HCPL2611
6 V02
8
1
F2
5 GND
+ 4
HCPL2630
HCPL2631
Enable
Output
NC
NC
H
www.fairchildsemi.com
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
January 2011
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-55 to +125
TOPR
Operating Temperature
-40 to +85
TSOL
C
mA
EMITTER
IF
DC/Average Forward
Single Channel
50
Input Current
30
VE
Single Channel
5.5
VR
Each Channel
5.0
PI
Power Dissipation
Single Channel
100
mW
45
DETECTOR
Supply Voltage
VCC
(1 minute max)
7.0
50
mA
IO
Output Current
50
VO
Output Voltage
Each Channel
7.0
PO
Collector Output
Single Channel
85
mW
Power Dissipation
60
Single Channel
*For peak soldering reflow, please refer to the Reflow Profile on page 11.
Symbol
Parameter
Min.
Max.
Units
IFL
250
IFH
*6.3
15
mA
VCC
4.5
5.5
VEL
0.8
VEH
2.0
VCC
TA
-40
+85
*6.3mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value
is 5.0mA or less.
www.fairchildsemi.com
2
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.8
EMITTER
VF
IF = 10mA
BVR
IR = 10A
CIN
Input Capacitance
VF = 0, f = 1MHz
IF = 10mA
ICCH
Single Channel
10
Dual Channel
10
15
ICCL
Single Channel
VCC = 5.5V,
IF = 10mA
13
Dual Channel
VE = 0.5V
IEL
IEH
VEH
TA = 25C
VF / TA
1.4
1.75
5.0
V
60
pF
-1.4
mV/C
DETECTOR
VEL
mA
mA
14
21
-0.8
-1.6
mA
-0.6
-1.6
mA
2.0
(3)
0.8
Switching Characteristics (TA = -40C to +85C, VCC = 5V, IF = 7.5mA unless otherwise specified)
Symbol
TPLH
TPHL
AC Characteristics
Test Conditions
Propagation Delay
Time to Output HIGH
Level
RL = 350,
CL = 15pF(4) (Fig. 12)
Propagation Delay
Time to Output LOW
Level
TA = 25C(5)
TA = 25C
Min.
Typ.*
20
45
Max. Unit
75
ns
100
25
45
75
ns
100
3
35
ns
tr
RL = 350, CL = 15pF
(Fig. 12)
50
ns
tf
12
ns
tELH
Enable Propagation
Delay Time to Output
HIGH Level
20
ns
tEHL
Enable Propagation
Delay Time to Output
LOW Level
20
ns
Common Mode
Transient Immunity
(at Output HIGH Level)
10,000
V/s
Common Mode
Transient Immunity
(at Output LOW Level)
|CMH|
|VCM| = 400V
|CML|
HCPL2611
|VCM| = 400V
HCPL2611
5000
10,000
10,000
15,000
V/s
10,000
5000
10,000
10,000
15,000
www.fairchildsemi.com
3
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
DC Characteristics
Test Conditions
Min.
Typ.*
Max.
Unit
100
IOH
VOL
.35
0.6
IFT
mA
Max.
Unit
1.0*
Characteristics
Test Conditions
Min.
Typ.*
Input-Output Insulation
Leakage Current
VISO
RI-O
VI-O = 500V(12)
1012
1MHz(12)
0.6
pF
CI-O
f=
2500
VRMS
1. The VCC supply to each optoisolator must be bypassed by a 0.1F capacitor or larger. This can be either a ceramic
or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible
to the package VCC and GND pins of each device.
2. Each channel.
3. Enable Input No pull up resistor required as the device has an internal pull up resistor.
4. tPLH Propagation delay is measured from the 3.75mA level on the HIGH to LOW transition of the input current
pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse.
5. tPHL Propagation delay is measured from the 3.75mA level on the LOW to HIGH transition of the input current
pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse.
6. tr Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse.
7. tf Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse.
8. tELH Enable input propagation delay is measured from the 1.5V level on the HIGH to LOW transition of the input
voltage pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse.
9. tEHL Enable input propagation delay is measured from the 1.5V level on the LOW to HIGH transition of the input
voltage pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse.
10. CMH The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the
HIGH state (i.e., VOUT > 2.0V). Measured in volts per microsecond (V/s).
11. CML The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the
LOW output state (i.e., VOUT < 0.8V). Measured in volts per microsecond (V/s).
12. Device considered a two-terminal device: Pins 1, 2, 3 and 4 shorted together, and Pins 5, 6, 7 and 8 shorted
together.
www.fairchildsemi.com
4
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Conditions:
IF = 5 mA
VE = 2 V
VCC = 5.5V
0.7
0.6
IOL = 12.8 mA
0.5
IOL = 16mA
0.4
0.3
IOL = 6.4mA
0.2
IOL = 9.6mA
0.1
30
16
10
0.1
0.01
0.001
0.0
-40
-20
20
40
60
80
0.9
1.0
1.1
VCC = 5 V
100
RL = 4 k (TPLH)
80
60
RL = 1 k (TPLH)
40
RL = 350 (TPLH)
RL = 1 k
RL = 4 k (TPHL)
RL = 350 k
11
13
15
50
1.5
1.6
IF = 15mA
IF = 10mA
40
IF = 5mA
35
30
Conditions:
VCC = 5 V
VE = 2 V
VOL = 0.6 V
25
20
-40
-20
20
40
60
80
Conditions:
VCC = 5.0 V
VO = 0.6 V
1.4
45
1.3
20
1.2
3
RL = 350
RL = 1k
2
RL = 4k
5
RL = 350
4
RL = 4k
RL = 1k
1
-40
0
-20
20
40
60
80
www.fairchildsemi.com
5
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
80
60
Conditions:
IF = 7.5mA
VCC = 5A
40
20
RL = 1 k
-60
RL = 350
-40
-20
20
40
60
80
RL = 4 k (tr)
500
400
Conditions:
IF = 7.5 mA
VCC = 5 V
300
200
RL = 1 k (tr)
100
RL = 350 (tr)
-60
100
-40
-20
TA TEMPERATURE (C)
40
60
20
80
100
(tf)
TA TEMPERATURE (C)
120
100
RL = 4 k (TELH)
80
60
40
RL = 1 k (TELH)
RL = 350 (TELH)
20
0
-60
RL = 1 k
RL = 4 k
RL = 350
RL = 350
RL = 1 k
RL = 4 k
-40
-20
20
40
60
RL = 4 k TPLH
100
80
60
RL = 1 k TPLH
40
RL = 350 TPLH
RL = 1 k
RL = 4 k
RL = 350
(TEHL)
80
20
-60
100
-40
-20
TA TEMPERATURE (C)
20
40
60
TPHL
80
100
TA TEMPERATURE (C)
15
10
0
-60
-40
-20
20
40
60
80
100
TA TEMPERATURE (C)
www.fairchildsemi.com
6
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Pulse
Generator
tr = 5ns
Z O = 50
+5V
IF = 7.5 mA
VCC
IF = 3.75 mA
Input
(IF )
Output
(VO )
t PHL
2
Input
Monitor
(I F)
.1 f
bypass
RL
Output
(VO )
CL
47
GND
tPLH
1.5 V
90%
Output
(VO )
10%
5
tf
tr
Pulse
Generator
tr = 5ns
Z O = 50
Input
Monitor
(V E)
+5V
3.0 V
Input
(VE )
VCC
1.5 V
t EHL
7.5 mA
.1 f
bypass
RL
1.5 V
Output
(VO )
t ELH
Output
(VO )
CL
GND
www.fairchildsemi.com
7
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Test Circuits
VCC
IF
A
+5V
.1 f
bypass
350
B
VFF
GND
Output
(VO)
VCM
Pulse Gen
Peak
VCM
0V
CM H
5V
Switching Pos. (A), IF = 0
VO
VO (Min)
VO (Max)
Switching Pos. (B), I F = 7.5 mA
VO
0.5 V
CM L
www.fairchildsemi.com
8
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Through Hole
PIN 1
ID.
1
4
0.270 (6.86)
0.250 (6.35)
5
0.270 (6.86)
0.250 (6.35)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.390 (9.91)
0.370 (9.40)
SEATING PLANE
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.070 (1.78)
0.045 (1.14)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
15 MAX
0.154 (3.90)
0.120 (3.05)
0.300 (7.62)
TYP
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
Surface Mount
0 to 15
0.400 (10.16)
TYP
0.390 (9.91)
0.370 (9.40)
4
0.070 (1.78)
PIN 1
ID.
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
0.100 (2.54)
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.415 (10.54)
0.300 (7.62)
TYP
0.030 (0.76)
0.016 (0.41)
0.008 (0.20)
0.045 (1.14)
0.315 (8.00)
MIN
0.405 (10.30)
MAX.
Note:
All dimensions are in inches (millimeters)
www.fairchildsemi.com
9
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Package Dimensions
Option
Description
6N137S
SD
6N137SD
6N137W
6N137V
VDE0884
WV
6N137WV
SV
6N137SV
SDV
6N137SDV
Marking Information
1
V
3
2601
XX YY T1
Definitions
1
Fairchild logo
Device number
VDE mark (Note: Only appears on parts ordered with VDE option
See order entry table)
www.fairchildsemi.com
10
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Ordering Information
12.0 0.1
4.90 0.20
4.0 0.1
1.55 0.05
4.0 0.1
0.30 0.05
1.75 0.10
7.5 0.1
13.2 0.2
10.30 0.20
1.6 0.1
10.30 0.20
0.1 MAX
16.0 0.3
Reflow Profile
Temperature (C)
300
215 C, 1030 s
250
225 C peak
200
150
100
50
Ramp up = 3C/sec
0
0
0.5
1.5
2.5
3.5
4.5
Time (Minute)
Peak reflow temperature: 225C (package surface temperature)
Time of temperature higher than 183C for 60150 seconds
One time soldering reflow is recommended
www.fairchildsemi.com
11
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
Tape Specifications
AccuPower
Auto-SPM
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED
Dual Cool
EcoSPARK
EfficientMax
ESBC
Fairchild
Fairchild Semiconductor
FACT Quiet Series
FACT
FAST
FastvCore
FETBench
FlashWriter*
FPS
F-PFS
FRFET
SM
Global Power Resource
Green FPS
Green FPS e-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
Motion-SPM
OptoHiT
OPTOLOGIC
OPTOPLANAR
PowerTrench
PowerXS
Programmable Active Droop
QFET
QS
Quiet Series
RapidConfigure
PDP SPM
*
Power-SPM
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
TinyBoost
TinyBuck
TinyCalc
TinyLogic
TINYOPTO
TinyPower
TinyPWM
TinyWire
TriFault Detect
TRUECURRENT*
SerDes
UHC
Ultra FRFET
UniFET
VCX
VisualMax
XS
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I51
www.fairchildsemi.com
12
Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 High Speed 10MBit/s Logic Gate Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.