This document contains 7 problems involving calculating reactions, tensions, and forces in structures. The problems involve beams, pulleys, lawn mowers on inclines, booms, and poles with cables. The solutions provided for each problem involve calculating the magnitude and direction of various support reactions, tensions, and normal forces through vector analysis and considering conditions of static equilibrium.
This document contains 7 problems involving calculating reactions, tensions, and forces in structures. The problems involve beams, pulleys, lawn mowers on inclines, booms, and poles with cables. The solutions provided for each problem involve calculating the magnitude and direction of various support reactions, tensions, and normal forces through vector analysis and considering conditions of static equilibrium.
This document contains 7 problems involving calculating reactions, tensions, and forces in structures. The problems involve beams, pulleys, lawn mowers on inclines, booms, and poles with cables. The solutions provided for each problem involve calculating the magnitude and direction of various support reactions, tensions, and normal forces through vector analysis and considering conditions of static equilibrium.
This document contains 7 problems involving calculating reactions, tensions, and forces in structures. The problems involve beams, pulleys, lawn mowers on inclines, booms, and poles with cables. The solutions provided for each problem involve calculating the magnitude and direction of various support reactions, tensions, and normal forces through vector analysis and considering conditions of static equilibrium.
acting at point C, the coordinate direction angles of the force are = 60, = 120, = 45. Determine the reaction at the fixed support O. Ans. -10 lb, 10 lb, -14.142 lb. -297.99 lb-ft, -15.15 lb-ft, 200 lb-ft.
2. Calculate the reactions at the fixed
support of the cantilevered beam loaded as shown. Ans. 225 N, 189.71 N, 62.0671 N-m
3. Determine the reactions at A and E if P = 500
N. What is the maximum value P may have for static equilibrium? Neglect the weight of the structure compared with the applied loads.
a) Ans. Ax =1285.5 N, Ay = 2964.1 N, Ex = 3285.5.
b) P = 1732.1 N
4. The two light pulleys are fastened together
and form an integral unit. They are prevented from turning about their bearing at O by a cable wound securely around the smaller pulley and fastened to point A. Calculate the magnitude R of the force supported by the bearing O for the applied 2kN load. Ans. R = 4.378 kN
5. The man pushes the lawn mower
at a steady speed with a force P which is parallel to the incline. The mass of the mower with attached grass bag is 50 kg with mass center at G. If = 15o, determine the normal forces NB and Nc under each pair of wheels B and C. Neglect friction. Compare with normal forces for the conditions of = 0o and P = 0. Ans. NB = 214.19 N, NC = 259.6 N
6. The boom AB lies in the vertical yz plane and is
supported by a ballandsocket support at B and by the two cables at A. Calculate the tension in each cable resulting from the 20 kN force acting in the horizontal plane and applied at the midpoint M of the boom. Neglect the weight of the boom. Ans. T1 = 32.97 kN, T2 = 22.819 kN, RBx = -3.42 kN, RBy = 4.7 kN, RBz = 46.98 kN
7. Determine the tensions TAE and TGF in the two
supporting cables resulting from the 1.2kN tension in cable CD. Assume the absence of any resisting moments on the base of the pole at O about the x and yaxes, but not about zaxis. Use vector approach. Ans. TAE = 4.303 kN, TGF = 3.469 kN, Mz = 2.886 kN-m, Rx = -0.321 kN, Ry = -0.6414 kN, Rz = 7.697 kN.