This document describes a closed-loop controlled three-phase thyristor rectifier that uses a 6-Pulse Generator component to control the firing of thyristors based on the detected phase angle of the three-phase supply voltage. The reference current ramps up from 0 to 10 A and then jumps to 25 A.
This document describes a closed-loop controlled three-phase thyristor rectifier that uses a 6-Pulse Generator component to control the firing of thyristors based on the detected phase angle of the three-phase supply voltage. The reference current ramps up from 0 to 10 A and then jumps to 25 A.
This document describes a closed-loop controlled three-phase thyristor rectifier that uses a 6-Pulse Generator component to control the firing of thyristors based on the detected phase angle of the three-phase supply voltage. The reference current ramps up from 0 to 10 A and then jumps to 25 A.
This document describes a closed-loop controlled three-phase thyristor rectifier that uses a 6-Pulse Generator component to control the firing of thyristors based on the detected phase angle of the three-phase supply voltage. The reference current ramps up from 0 to 10 A and then jumps to 25 A.
This examples demonstrates a closed-loop controlled three-phase thyristor (SCR) rectifier. The reference current ramps up from 0 to 10 A and then jumps to 25 A. A 6-Pulse Generator component is used to control the firing of the thyristors. A PLL detects the phase angle of the three-phase supply voltage.