Professional Documents
Culture Documents
PLC 8
PLC 8
plc 1
( ) cylinder
Types of cylinders
1. Single acting cylinders
2. Double acting cylinders
plc
http://www.arab-eng.org/vb/t81239.html
double single spring
" "
http://cdd.gotevot.edu.sa/college/mechanics/new.htm
/
enghaysem@gmail.com
_____________________________________________________________________
Tank ( ) (
)
Pump Directional Valve
compressor
Directional Valve
valve
valve
/
enghaysem@gmail.com
_____________________________________________________________________
/
enghaysem@gmail.com
_____________________________________________________________________
timers
1. ON Delay Timer
( Ton )
( Toff )
3. MonoStable Timer
( Tmon)
(Tmr)
/
4
enghaysem@gmail.com
_____________________________________________________________________
/
5
enghaysem@gmail.com
_____________________________________________________________________
Program Example :
The T097 (0.01 sec timer) will turn on 20 seconds later until the P020 is
switched on.
20 p20
/
6
enghaysem@gmail.com
_____________________________________________________________________
Initial value of timer is setting time and timer is on
Timer value decreases from s.t to zero when you release i/p
condition
After reaching zero timer will be off
Block shape
Program Example : The T000 (0.1 sec timer) will turn off 5 seconds later
until the P020 is switched off.
/
7
enghaysem@gmail.com
_____________________________________________________________________
plc 2000
start 10 s.t 0
start
/
enghaysem@gmail.com
_____________________________________________________________________
5 start
10 start
15 start
start
/
enghaysem@gmail.com
_____________________________________________________________________
ignored.
When the RST instruction is executed, the timer contact will turn off
and the
/
10
enghaysem@gmail.com
_____________________________________________________________________
Program Example :
/
enghaysem@gmail.com
11
_____________________________________________________________________
When the input condition turns on, the current value will be set as
The timer contact turns on when the input condition is switched on.
current value will reset as the setting value and re-start to decreasing from
the setting value.
When the RST instruction is executed, the timer contact will turn off and
the current value will be cleared as 0.
On
/
12
enghaysem@gmail.com
_____________________________________________________________________
Program example :
/
enghaysem@gmail.com
13
_____________________________________________________________________
:
:
:
0112970435 :
enghaysem@gmail.com
/
enghaysem@gmail.com
14