Professional Documents
Culture Documents
2657 Engine Flush Plus - EN
2657 Engine Flush Plus - EN
2657 Engine Flush Plus - EN
DESCRIPTION
Engine Flush Plus is a highly effective cleaning fluid for clearing the engine interior
of troublesome deposits. In combination with the carrier fluid, the ideally formulated
combination of detergent and dispersant additives dissolves sludge and lacquer
formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are
brought into suspension and removed during the next oil change. An engine which
has been cleaned of deposits and contamination and which is then filled with fresh
oil not contaminated with old impurities can develop its full performance
characteristics. Wear in the engine is thus reduced and the service life is extended.
PROPERTIES
TECHNICAL
DATA
AREAS OF
APPLICATION
APPLICATION
AVAILABLE
PACK SIZES
Color
Base
Density at 20 C
Flash point
Pour point
: brown
: additive/carrier liquid
: 0.825 g/cm
: 60
C
: - 45 C
For cleaning and flushing out the oil circuits of gasoline and diesel engines. Not
suitable for use on motorbikes with wet clutches.
One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush Plus to the
motor oil at running temperature before changing the oil. After adding the product,
allow the engine to idle for approx. 10 minutes. Then change the oil and the filter.
Engine Flush Plus is compatible with all commercially available motor oils. We
recommend cleaning the engine interior with Engine Flush Plus before every oil
change.
300 ml
300 ml
300 ml
PI 02/11/13
Our information is based on thorough research and may be considered reliable, although not legally
binding.