This instruction sheet provides steps for installing a waveguide pressure window. The installer must remove the brass flange plate and Mylar window from the package, apply gasket grease to one side of the flange plate, and place the Mylar window on the greased side. Then the installer places the flange plate and window against the high pressure side of the waveguide, with the Mylar side facing the gasket and flange, and secures the entire assembly with connector hardware.
This instruction sheet provides steps for installing a waveguide pressure window. The installer must remove the brass flange plate and Mylar window from the package, apply gasket grease to one side of the flange plate, and place the Mylar window on the greased side. Then the installer places the flange plate and window against the high pressure side of the waveguide, with the Mylar side facing the gasket and flange, and secures the entire assembly with connector hardware.
This instruction sheet provides steps for installing a waveguide pressure window. The installer must remove the brass flange plate and Mylar window from the package, apply gasket grease to one side of the flange plate, and place the Mylar window on the greased side. Then the installer places the flange plate and window against the high pressure side of the waveguide, with the Mylar side facing the gasket and flange, and secures the entire assembly with connector hardware.
Contact & Cover/Gasket Flanges 1. Remove the brass flange plate and Mylar window from the contents of the waveguide pressure window package and identify all pieces. 2. Apply a thin coating of Gasket Grease P/N 515121 or equivalent as per MIL-S-8660B to one side of brass flange plate. 3. Place the Mylar pressure window onto the greased side of the flange plate.
4. Place the flange plate with pressure window against
the high pressure side of the waveguide. Be sure the Mylar side of the flange plate is towards the gasket and waveguide flange. 5. Connect the low pressure side of the waveguide to the other side of the flange plate and secure the entire pressure window assembly with associated connector hardware.