Professional Documents
Culture Documents
s12p300-Info-AquaSeal-FR 8 7 2007 5 18 18 PM PDF
s12p300-Info-AquaSeal-FR 8 7 2007 5 18 18 PM PDF
AquaSeal SYSTEMS
DISCHARGE
VENT
FULL RECOVERY CLOSED LOOP LIQUID RING VACUUM PUMP SYSTEM
Close to 100 % of seal water is recovered and re-used. Because of heat build-up a heat
exchanger needs to be used. However, if the separator tank is large and the pump is small,
radiation can dissipate sufficient heat and the system could work without a heat exchanger.
VG
SYSTEM
INLET
SEAL WATER
MAKE-UP
TG
PUMP OVERFLOW
COOLING
WATER
INLET
OVERFLOW
COOLING WATER
DISCHARGE
TG
CHECK VALVE
FLOW CONTROL
CG
GLOBE VALVE
VG
SHUT-OFF VALVE
SOLENOID VALVE
VACUUM RELIEF VALVE
TEMPERATURE GAUGE
OPTIONAL
COMPOUND GAUGE
COOLING WATER
AIR OR GAS
VACUUM GAUGE
STRAINER
RECIRCULATING PUMP
LEVEL SWITCH
HEAT EXCHANGER
Performance Characteristics
Nominal capacities
2-18,000 CFM
Pump speed:
200-3500 RPM
Motor:
0.25-900 HP
Weight:
consult factory
Maximum noise level (at 3 feet):
68-85 dBA
Maximum vacuum
29 Hg
The Experts in Vacuum Solutions
Information contained in this document is for reference only. Subject to change without notice.
935 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 46360-5672
TOLL-FREE: 888-925-5444 TEL.: 219-861-0661 FAX: 219-861-0662
Page number
12-300
Reference
0206/1/ado