Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

EnvirowetDC-100

EnviroWet DC-100 is a proprietary, highly biodegradable formulation designed for dust control on
haulage roads. Supplied as a liquid, DC-100 is readily pumpable and readily mixes with water. The
unique properties of DC-100 significantly improve water retention rates, and make it much more
compatible with solvent extraction and bacterial leaching processes. These benefits make DC-100 the
safest and most cost-effective dust control agent available.

Physical State:
Odor:
Appearance:
Flash Point, (Closed Cup):
Pour point:
Density @ 25C:
Viscosity, cps @25C
Water miscibility:

Liquid
Mild
Light yellow liquid
> 95C (>203F)
- 4C (25F)
1.100 g/ml
550
Complete,
soluble
in all proportions

Applications
DC-100 is an effective dust control agent. Its
superior wetting characteristics improve water
retention and slow evaporation rates by 16 - 17%,
which equate to a corresponding reduction in water
usage and application costs. Since DC-100 is
highly biodegradable it will not build up with
repetitive applications. This minimizes the risk of
potential down stream process problems.

exhibits low toxicity to iron oxidizing bacteria, low


foaming characteristics and a lower tendency to
form stable emulsions than competitive products.
These characteristics make DC-100 much more
compatible with leaching and solvent extraction
processes than competitive products.

Solution Preparation
The Recommended dosage rate for EnviroWet
DC-100 is 1 gallon per 21,400 gallons of water or
~50 parts per million (ppm). DC-100 should be
added slowly to the water stream as it enters the
water truck. This will supply adequate agitation to
yield a homogenous mixture.
Surface Tension of DC -100
60

Surface Tension, dyne/cm

Chemical and Physical Properties

55
50
45
40
35
30

Improved Compatibility with Leaching


and Solvent Extraction Processes

25
0

50

100

150

200

250

300

350

Concentration, m g/L

Tests have confirmed that EnviroWet DC-100

Information provided in this technical literature is believed to be accurate. However, Cognis assumes no liability and makes
no warranty or representation that the information is correct or complete. Final determination of suitability of any material and
issues of patent infringement are the sole responsibility of the user who alone knows the conditions of intended use.
Envirowet is a registered trademark of Cognis Corporation
Cognis Corporation Mining Chemicals
EnvirowetDC-100

Envirowet_r_DC-100_E

Envirowet_r_DC-100_E

You might also like