Professional Documents
Culture Documents
Implant: Stainless Steel
Implant: Stainless Steel
4441
Implant
austenitic
Stainless Steel
Material No.
DINAbreviation
AFNOR
AISI/SAE/ASTM
ISO
Euro Standard
EN
Others
IMDS
1.4441
X2CrNiMo
18-15-3
Z 2 CN 18.14.3
5832-1
X2CrNiM
18-15-3
UNS 31673
163717740
C
Si
Mn
P
S
Cr Mo Ni
Cu
N
Fe
REFERENCE ANALYSIS
max. max. max. max. max. 17.00 2.70 13.00 max. max. balance
%
0.03 0.75 2.00 0.025 0.003 19.00 3.00 15.00 0.50 0.10
EXECUTION
DELIVERY FORM
STANDARD SIZES
AVAILABILITY
TOLERANCES
MECHANICAL
PROPERTIES
At delivery status:
Tensile strength (Rm)
- hard K 860: 3.00 - 22.0 mm
(for screws)
930 1100 MPa
- extra hard: 0.80 - 12.0 mm min. 1400 MPa
Last 11/2013
Volume no. 12
Page 1/2
www.kleinmetals.ch
info@kleinmetals.ch
CRACK TESTING
BARS
CLEANLINESS
GRAIN SIZE
MICROSTRUCTURE
HEAT TREATMENT
CUTTING RATES
Soft annealing:
1050 C, cooling in water
Hardening and tempering by heat treatment is impossible
Last 11/2013
Volume no. 12
Page 2/2
www.kleinmetals.ch
info@kleinmetals.ch