Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 12

WOOD JOINTS

DRAWING

USES

CORNER HALVING JOINT


-joins two members of their respective
ends, forming a corner. This form of
the joint is commonly used to house a
nail in upright, such as legs.

TEE HALVING JOINT


DOWELLED
JOINT
DOVETAIL HALVING
-It is the simplest form and shows a
tendon
halving
only
one shoulder.
It is a
-A
dowelled
joint
reinforced
by dowels.
-the dovetail will prevent the joint
useful
interior
joint
for and
framing
that
This
can
be very
strong
widely
used
separating laterally through ride fores.
has
to be covered on the backside with,
in manufacturing.
match boarding and allows the work to

WOOD JOINTS

finish level and at the back.

DRAWING

USES

SHOULDERED
MORTISE AND
CROSS HALVING
TENON

-The cross halving joint is used when


horizontal
members
vertical
-The
shoulder
takes cross
the lion's
share of
members
ofand
frames,
for example,
in
the weight,
the pegged
tenon's

WOOD JOINTS

divisions
fortocabinets,
main job is
hold the doors
girt inand
place.
windows.

DRAWING

USES

COMMON
DOVETAIL BRIDLE
JOINT JOINT

WOOD JOINTS

-used when a light frame is needed and


-used for drawers where the joint can
strength is not the main requirement.
only be seen from one side.

DRAWING

USES

CORNER
BRIDLE JOINT
MITTER JOINT

WOOD JOINTS

-used to house a rail in uprights, such


-used for joining two members at
as legs. It provides good strength in
degree angles to form a 90 degree
compression.
corner.

DRAWING

USES

MITTERED
CORNER
HALVING
BAREFACED
MORTISED
AND
JOINT
TENON JOINT

WOOD JOINTS
-used in making a strong corner at any
-used in similar position is shown the
angle where it is necessary to show a
door or frame in the case
mitter upon one side

DRAWING

USES

WOOD JOINTS

DOUBLE
COMMONTENON
MORTISE AND TENON
JOINT

DRAWING

USES

-often nearly as much giving coverage


-for a leg to apron joint its strong and
as standard single tenons.
it resist racking.

WOOD JOINTS

MITTERED CORNER BRIDLE


JOINT

-This is a rot useful joint for positions

DRAWING

USES

similar to that shown in the small glass


frame.

WOOD JOINTS
DRAWING

USES

WOOD JOINTS
DRAWING

USES

You might also like