Professional Documents
Culture Documents
ABB Distribution Automation Protection Relay Price List: Enable Content Options
ABB Distribution Automation Protection Relay Price List: Enable Content Options
ABB Distribution Automation Protection Relay Price List: Enable Content Options
In Excel 2010, press the ENABLE CONTENT button below the ribbon and enable the macro c
In Excel 2007, press the OPTIONS button below the ribbon and enable the macro contents.
In earlier versions of Excel, choose to enable macros when asked for when the file is opened
s on macros.
ENT button below the ribbon and enable the macro contents.
User's Guide
Relion
RER615
REJ603
REC615
REF611
RIO600
REM611
REC601, REC603
Wireless Controller
REB611
RER601, RER603
Wireless Gateway
REF615
RTU
REM615
Feeder Terminal
REF 541, REF 543, REF 545
RET615
RED615
Terminal
RET 541, RET 543, RET Transformer
545
REU615
REF542plus
Feeder Terminal
REV615
REA 101
Arc Protection
REF620
SPACOM
Protection IED
REM620
SACO
Annunciator Unit
RET620
REC 523
REF630
RER, SPA-ZC
REM630
SPA-ZP
RET630
SPA-ZX
REG630
REF610
Feeder Protection
REM610
Motor Protection
REU610
COM600
PCM600
Programing Tool
PML630
Power Management
Machine Terminal
Validity:
From 2013-12-01
Until 2013-12-01
Currency:
EUR
Order codes:
Disclaimer:
Please be aware, that this Excel file is a price list and not a product configurator with
complete selection rules. This means that in some cases also not possible order codes may
be generated and prices for these. We do not take any liability for against the in the Product
Guides given selection rules generated order codes and possible prices for these codes.
We keep the right to adjust the prices and technical data without any prenotification when
there are changes in products and/or mistakes are found in the price list.
Instructions
1.
Configurable products with order numbers have the order number displayed at the top of the page.
2.
Yellow parts of the order number are fixed and cannot be changed.
3.
Green parts of the order number are configurable and can be selected from the drop-down list.
Order number parts can also be selected by single-clicking a code value in the table.
4.
Accessories for configurable products can be found below the order number table.
REF601 / REJ601
Sele
46
3/4 5/6
10 11
##
EUR
##
##
Relay type
REF601 - Feeder protection with control
REF601
##
REJ601
##
###
##
Standard
IEC
##
###
##
A4
##
D4
##
E4
##
###
##
46
4 BI + 6 BO
##
###
##
Serial communication
with RS485
##
None
##
###
##
Communication protocol
MODBUS RTU
##
None
##
###
##
Power supply
24...240V AC / DC
##
###
##
Undefined
##
###
##
Version
##
##
##
##
Communication Accessories
RE_601 communication card
Order No.
CIM601BNNNNBANXF
Price
EUR
0
REJ603
Self-Powered Feeder Protection
Price
Item
Order No.
Description
REJ603BB401NN31E
REJ603BB401NN31E
EUR
0
REJ603BB401NN3XE
REJ603BB401NN3XE
REJ603BNNNNNNBZA
REJ603BNNNNNNBZA
Current transformer
Note: The REJ603 requires specific ring CTs to be used for phase current measurement. It is not
compatible with conventional 1 A/ 5 A CTs. The primary current setting range is adequately
covered by following 5 variants of CTs .
CT type
Setting range of
reference current Is
REJ603-CT1
8 - 28A
REJ603-CT2
16 - 56 A
REJ603-CT3
32 - 112 A
REJ603-CT4
64 - 224 A
REJ603-CT5
128 - 448 A
For further technical information on current transformers and ordering information, please refer to
the datasheet of CT reference no. 1YMA583791R0001-4.
REF611
Feeder Protection and Control
Selected Order No. RE
611
4/5/6
10 11 12 13 14 15 16 17 18
Product
RE
IED (Relay)
Main application
F
IED series
611
Complete relay
Complete relay with test switch installed and wired in 19 cover plate, for
standar configuration A
Complete relay with test switch installed and wired in 19 cover plate, for
standar configuration B
Complete relay with test switch installed and wired for 4U Combilfex rack
mounting, for standar configuration A
Complete relay with test switch installed and wired for 4U Combilfex rack
mounting, for standar configuration A
Standard
B
IEC
Standard configuration
A = Non-directional O/C and directional E/F
AIM I0
Analog inputs
1A / 5A
0.2A / 1A
Communication module
Ethernet 100Base FX (LC)
Additional price
Additional price
Additional price
Additional price
D
N
None
Communication protocols
IEC61850
Modbus
Additional price
Language
English
Option 1
Auto-reclosing
Additional price
A
N
None
Option 2
Optional I/O (X130)
Additional price
A
N
None
Power supply
48...250 V DC, 100...240 V AC
2460 V DC
Undefined
Version
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Valid
REF611
Feeder Protection and Control
Selected Order No. RE
611
4/5/6
10 11 12 13 14 15 16 17 18
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
Valid
REM611
Motor Protection and Control
Selected Order No. RE M
Instructions / Order No. Pos. 1/2
611
4/5/6
10 11 12 13 14 15 16 17 18
Product
RE
IED (Relay)
Main application
M
IED series
611
Complete relay
Complete relay with test switch installed and wired in 19 cover plate
Additional price
Complete relay with test switch installed and wired for 4U Combilfex rack
mounting
Additional price
Standard
B
IEC
Standard configuration
A
Motor protection
AIM I0
Analog inputs
1A / 5A
0.2A / 1A
Communication module
Ethernet 100Base FX (LC)
Additional price
Additional price
Additional price
Additional price
D
N
None
Communication protocols
IEC61850
Modbus
Additional price
Language
English
Option 1
None
Option 2
None
Power supply
48...250 V DC, 100...240 V AC
2460 V DC
Undefined
Version
Price
EUR
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
EUR
REM611
Motor Protection and Control
Selected Order No. RE M
Instructions / Order No. Pos. 1/2
611
4/5/6
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
10 11 12 13 14 15 16 17 18
E
EUR
REB611
Busbar and Multipurpose Differential Protection and Control
Selected Order No. RE B
Instructions / Order No. Pos. 1/2
611
4/5/6
10 11 12 13 14 15 16 17 18
Product
RE
IED (Relay)
Main application
B
IED series
611
Complete relay
Complete relay with test switch installed and wired in 19 cover plate
Additional price
Complete relay with test switch installed and wired for 4U Combilfex rack
mounting
Additional price
Standard
B
IEC
Standard configuration
A
AIM I0
Analog inputs
1A / 5A
0.2A / 1A
Communication module
Ethernet 100Base FX (LC)
Additional price
Additional price
Additional price
Additional price
D
N
None
Communication protocols
IEC61850
Modbus
Additional price
Language
English
Option 1
None
Option 2
None
Power supply
48...250 V DC, 100...240 V AC
2460 V DC
Undefined
Version
Price
EUR
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
EUR
REB611
Busbar and Multipurpose Differential Protection and Control
Selected Order No. RE B
Instructions / Order No. Pos. 1/2
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
611
4/5/6
10 11 12 13 14 15 16 17 18
E
EUR
REF615
Feeder Protection and Control
Selected Order No. H
AE AG B
5/6 7/8
10 11 12 13 14 15 16 17 18
IED
Complete Relay
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "G" and "L".
Standard
IEC
Main Application
Feeder protection and control
J = Directional O/C, directional E/F, voltage & frequency based protection &
measurements, synchro-check and CB condition monitoring (optional power
quality, RTD option)
K = Directional and non-directional O/C and E/F, high impedance restricted E/F,
voltage & frequency based protection & measurements, synchro-check and CB
condition monitoring (optional power quality and fault locator)
L = Directional O/C, directional E/F, voltage & frequency based protection &
measurements and CB condition monitoring (Sensor inputs, optional power
quality and fault locator)
N = Directional and non-directional O/C and E/F, voltage & frequency based
protection & measurements, synchro-check and CB condition monitoring
(optional power quality and fault locator)
Analog Inputs/Outputs
Std conf A: 4I + U0 (Io 1/5A)
A AB
AA
AA
AB
FA
FB
AC
AD
AC
AD
FC
FD
AE
AF
AE
AF
AE
AF
AE
AF
AE
AF
Valid
REF615
Feeder Protection and Control
Selected Order No. H
AE AG B
5/6 7/8
10 11 12 13 14 15 16 17 18
G DA
K BC
DA
FF
FE
FE
FF
FE
FF
FE
FF
FE
FF
Binary Inputs/Outputs
3BI + 6BO
AA
4BI + 6BO
AB
11BI + 10BO
AC
FG
12BI + 10BO
AD
FE
17BI + 13BO
AE
FA
18BI + 13BO
AF
FB
16BI + 10BO
AG
FC
8BI + 10BO
AH
FD
Communication (Serial/Ethernet)
RS 485 (including IRIG-B) + Ethernet 100Base FX (LC)
Glassfibre ST
None
Communication (Protocol)
IEC 61850
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
Language
English
Valid
REF615
Feeder Protection and Control
Selected Order No. H
AE AG B
5/6 7/8
10 11 12 13 14 15 16 17 18
Front Panel
Small LCD
Option 1
Reclosing
Arc Protection
Power Quality
Fault locator and Power Quality and Arc Protection and Reclosing
Q
N
None
Option 2
Directional E/F
None
Power Supply
48-250 Vdc; 100-240 Vac
24-60 Vdc
Version
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
1MRS120534-1.5
1MRS120534-3
1MRS120534-5
Valid
REM615
Motor Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
IED
Complete Relay
Complete Relay with test switch installed and wired in 19'' cover plate
Note! Not available for standard configuration "D".
Complete Relay with test switch installed and wired in 19'' cover plate
Note! Not available for standard configuration "D"
Complete Relay with test switch installed and wired in 19'' cover plate
Note! Not available for standard configuration "D"
Complete Relay with test switch installed and wired for CombiFlex rack mounting
Note! Not available for standard configuration "D"
Complete Relay with test switch installed and wired for CombiFlex rack mounting
Note! Not available for standard configuration "D"
Complete Relay with test switch installed and wired for CombiFlex rack mounting
Note! Not available for standard configuration "D"
Standard
IEC
Main Application
D = Motor protection with voltage & frequency based protection and measurements
(Sensor inputs)
Analog Inputs/Outputs
A AC
A AD
AE
AF
A AG
A AH
B CB
B CC
B CD
CA
DA
Binary Inputs/Outputs
4BI+6BO
AB
12BI+10BO
AD
12BI+6BO+3HSO
FE
16BI+10BO
AG
16BI+6BO+3HSO
FC
8BI+10BO
AH
14BI + 13BO
AJ
8BI+6BO+3HSO
FD
14BI+9BO+3HSO
FF
Communication (Serial/Ethernet)
RS 485 (including IRIG-B) + Ethernet 100Base FX (LC)
Glassfibre ST
None
10 11 12 13 14 15 16 17 18
EUR
REM615
Motor Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Communication (Protocol)
IEC 61850
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
Language
English
Front Panel
Small LCD
Option 1
Arc protection
B
N
None
Option 2
None
Power Supply
48-250 Vdc; 100-240 Vac
24-60 Vdc
Version
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
1MRS120534-1.5
1MRS120534-3
1MRS120534-5
EUR
RET615
Transformer Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
IED
Complete Relay with test switch installed and wired in 19'' cover plate
Note! Not available for standard configuration "D".
Complete Relay with test switch installed and wired for CombiFlex rack mounting
Note! Not available for standard configuration "D"
Complete Relay with test switch installed and wired for CombiFlex rack mounting
Note! Not available for standard configuration "D"
Standard
IEC
Main Application
Analog Inputs/Outputs
A BA
A BG
B BG
C BG
D BG
BE
BC
BE
G BC
G BE
H BC
BA
BA
BA
BC
BE
Binary Inputs/Outputs
8BI+ 10BO
BA
14BI + 13BO
BB
8BI+6BO+3HSO
FD
14BI+9BO+3HSO
FF
12BI + 10BO
AD
12BI+6BO+3HSO
FE
Communication (Serial/Ethernet)
RS 485 (including IRIG-B) + Ethernet 100Base FX (LC)
Glassfibre ST
10 11 12 13 14 15 16 17 18
EUR
RET615
Transformer Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
10 11 12 13 14 15 16 17 18
None
Communication (Protocol)
IEC 61850
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
Language
English
Front Panel
Small LCD
Option 1
Arc protection
B
N
None
Option 2
None
Power Supply
48-250 Vdc; 100-240 Vac
24-60 Vdc
Version
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
1MRS120534-1.5
1MRS120534-3
1MRS120534-5
EUR
RED615
Line Differential Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
X
4
5/6 7/8
IED
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "E".
Complete Relay with test switch installed and wired in 19'' cover plate.
Note! Not available for standard configuration "E".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "E".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "E".
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Note! Not available for standard configuration "E".
Standard
IEC
Main Application
Line differential protection
D = LDP with dir. O/C, dir. E/F, voltage and frequency protection (RTD option)
E = LDP with dir. O/C, dir. E/F, voltage and frequency protection (Sensor inputs)
Analog Inputs/Outputs
Std conf B: 4I + U0 (Io 1/5A)
AA
AB
A AC
AC
AE
AF
FE
FF
DA
Binary Inputs/Outputs
11BI+10BO
AC
12BI+10BO
AD
17BI+13BO
AE
18BI+13BO
AF
16BI + 10BO
AG
8BI + 10BO
AH
10 11 12 13 14 15 16 17 18
Communication (Serial/Ethernet)
RS 485 (connector incl. IRIG-B) + Line differential, multi mode fiber (LC)
RS 485 (connector incl. IRIG-B) + Line differential, single mode fiber (LC)
RS 485 (connector incl. IRIG-B) + Ethernet 100Base TX (RJ45) and line differential, multi mode fiber (LC)
RS 485 (connector incl. IRIG-B) + Ethernet 100Base TX (RJ45) and line differential, single
mode fiber (LC)
RS 485 (connector incl. IRIG-B) + 2 x Ethernet 100Base TX (RJ45) and line differential,
multi mode fiber (LC)
RS 485 (connector incl. IRIG-B) + 2 x Ethernet 100Base TX (RJ45) and line differential, single mode fiber (LC)
ST glass fibre (Rx/Tx) + Ethernet 100Base TX (RJ45) and line differential, multi mode fiber (LC)
ST glass fibre (Rx/Tx) + Ethernet 100Base TX (RJ45) and line differential, single mode
fiber (LC)
ST glass fibre (Rx/Tx) + 2 x Ethernet 100Base TX (RJ45) and line differential, multi mode
fiber (LC)
ST glass fibre (Rx/Tx) + 2 x Ethernet 100Base TX (RJ45) and line differential, single mode fiber (LC)
Ethernet 100Base TX (RJ45) and line differential, multi mode fiber (LC)
Ethernet 100Base TX (RJ45) and line differential, single mode fiber (LC)
2 x Ethernet 100Base TX (RJ45) and line differential, multi mode fiber (LC)
2 x Ethernet 100Base TX (RJ45) and line differential, single mode fiber (LC)
Communication (Protocol)
IEC 61850
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
EUR
RED615
Line Differential Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
X
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Language
English
Front Panel
Small LCD
Option 1
Reclosing
Power Quality
None
Option 2
Directional E/F
None
Power Supply
48...250 V DC, 100...240 V AC
2460 V DC
Version
Version 5.0
Description
Order No.
RPW600AMF
RPW600ADP
1MRS120547-3
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
EUR
REU615
Voltage Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
IED
Complete Relay with test switch installed and wired in 19'' cover plate.
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Standard
IEC
Main Application
Analog Inputs/Outputs
Std conf B: 4I + 3U (Io 1/5A)
B CC
Std conf A: 5U
CA
EA
Binary I/O
AD
12BI + 10BO
FE
8BI + 10BO
AH
14BI + 13BO
BB
Communication (Serial/Ethernet)
RS 485 (including IRIG-B) + Ethernet 100Base FX (LC)
Glassfibre ST
None
Communication (Protocol)
IEC 61850
10 11 12 13 14 15 16 17 18
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
Language
English
EUR
REU615
Voltage Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
10 11 12 13 14 15 16 17 18
E
Option 1
Arc protection
B
N
None
Option 2
None
Power Supply
48-250 Vdc; 100-240 Vac
24-60 Vdc
Version
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
1MRS120534-1.5
1MRS120534-3
1MRS120534-5
EUR
REV615
Capacitor Bank Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
IED
Complete Relay with test switch installed and wired in 19'' cover plate.
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Complete Relay with test switch installed and wired for CombiFlex rack mounting.
Standard
IEC
Main Application
B = Capacitor bank overload and unbalance protection, Non-dir. O/C and dir. E/F,
voltage & frequency based protection & measurements and CB condition
monitoring
Analog Inputs/Outputs
Std conf A: 7I (Io 1/5A)
A BA
B BC
A BG
BE
Binary Inputs/Outputs
8BI+ 10BO
BA
14BI + 13BO
BB
8BI+6BO+3HSO
FD
14BI+9BO+3HSO
FF
12BI + 10BO
AD
12BI+6BO+3HSO
FE
Communication (Serial/Ethernet)
RS 485 (including IRIG-B) + Ethernet 100Base FX (LC)
Glassfibre ST
None
Communication (Protocol)
IEC 61850
10 11 12 13 14 15 16 17 18
Modbus
IEC 61850+Modbus
IEC 103
DNP 3.0
Language
English
EUR
REV615
Capacitor Bank Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
N
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Front Panel
Small LCD
Option 1
Arc Protection
B
D
Power Quality
Power Quality and Arc Protection
F
N
None
Option 2
None
Power Supply
48-250 Vdc; 100-240 Vac
24-60 Vdc
Version
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
Mounting bracket for one IED with test switch RTXP in 4U Combiflex
(RHGT 19 variant C)
2RCA022642P0001
2RCA022643P0001
19 rack mounting kit for one IED and one RTXP18 test switch (the
test switch is not included in the delivery)
2RCA021952A0003
19 rack mounting kit for one IED and one RTXP24 test switch (the
test switch is not included in the delivery)
2RCA022561A0003
1MRS120534-1.5
1MRS120534-3
1MRS120534-5
EUR
RER615
Recloser Protection and Control
Selected Order No. H
Instructions / Order No. Pos.
1
4
5/6
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC)
10 11 12 13 14 15 16 17 18
IED
615 series IED (including case)
Standard
IEC
Main application
Recloser Protection and Control
Standard configurations, analog and binary I/O options Standard configuration descriptions in short:
A = Sectionalizer/Midpoint recloser application to be used with conventional
transformers
- Phase voltage inputs based on conventional VTs
- Phase current inputs based on conventional CTs
- Residual current input based on conventional CT
D = Tie point recloser application with syncrocheck and voltage measurement
functions to be used with voltage sensors
- 6 pieces of phase voltage inputs based on voltage sensors
- Phase current inputs based on conventional CTs
- Residual current input based on conventional CT
A AA A
A AA N
D AD N
Communication protocols
IEC 61850
Language
English (IEC) + English (ANSI)
Front Panel
Small LCD with IEC symbols
Large LCD with single line diagram (SLD) and IEC symbols
Large LCD with single line diagram (SLD) and ANSI symbols
Option 1
Directional earth-fault protection
None
Option 2
Voltage and Frequency protection
None
Option 3
Power quality
None
Power supply
24-60 VDC
Version
Version 4.0
EUR
RER615
Recloser Protection and Control
Selected Order No. H
Instructions / Order No. Pos.
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
1
4
5/6
10 11 12 13 14 15 16 17 18
EUR
REC615
Remote Monitoring and Control
Selected Order No. H
Instructions / Order No. Pos.
1
4 5/6
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC)
IED
615 series IED (including case)
Standard
IEC
Main application
Remote Monitoring and Control
Standard configurations, analog and binary I/O options Standard configuration descriptions in short:
A = Remote monitoring and control to be used with conventional transformers
- Phase voltage inputs based on conventional VTs
- Phase current inputs based on conventional CTs
- Residual current input based on conventional CT
A AA A
4 CT (Io 0.2/1A) + 3 VT + 8 BI + 10 BO
A AA N
4 CT (Io 0.2/1A) + 6 VD 12 BI + 10 BO
B AB N
C AC N
Communication protocols
IEC 61850
Language
English (IEC) + English (ANSI)
Front Panel
Small LCD with IEC symbols
Large LCD with single line diagram (SLD) and IEC symbols
Large LCD with single line diagram (SLD) and ANSI symbols
Option 1
Directional earth-fault protection
None
Option 2
Voltage and Frequency protection with load shedding and restoration
None
Option 3
Auto-reclosing
Power quality
None
Power supply
24-60 VDC
10 11 12 13 14 15 16 17 18
EUR
Version
Version 1.0
Description
Order No.
1MRS050696
1MRS050697
1MRS050831
1MRS050694
1MRS050695
REF620
Feeder Protection and Control
Selected Order No. N
N AC NN N
10 11 12 13 14 15 16 17 18
5/6 7/8
IED
IEC
Main application
Example configuration
Analog inputs and Binary I/O options
4I (Io 1/5A) + 5U + 24BI + 14BO
AA
AB
AC
AA
AB
AC
No optional board
NN
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (2 x RJ-45 + 1 x LC)
with HSR/PRP
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC)
with HSR/PRP
No Communication Module
Communication protocols
IEC 61850 (for Ethernet communication modules and IEDs
without a communication module )
Language
English
Front Panel
B
N
Option 2
None
Power supply
48...250 V DC, 100...240 V AC
Valid
REF620
Feeder Protection and Control
Selected Order No. N
N AC NN N
10 11 12 13 14 15 16 17 18
5/6 7/8
2460 V DC
Version
Version 2.0
Order No.
2RCA030573A0001
2RCA030894A0001
2RCA031135A0001
Valid
REM620
Motor Protection and Control
Selected Order No. N
1
5/6 7/8
IED
IEC
Main application
Example configuration
Analog inputs and Binary I/O options
7I (I0 1/5 A) + 5U + 12BI + 10BO + 6RTD in + 2mA in
AA
AB
AA
AB
AC
No optional board
NN
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (2 x RJ-45 + 1 x LC)
with HSR/PRP
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC)
with HSR/PRP
No Communication module
Communication protocols
IEC 61850 (for Ethernet communication modules and IEDs
without a communication module )
Language
English
Front Panel
B
N
Option 2
None
10 11 12 13 14 15 16 17 18
Power supply
48...250 V DC, 100...240 V AC
2460 V DC
EUR
REM620
Motor Protection and Control
Selected Order No. N
1
5/6 7/8
10 11 12 13 14 15 16 17 18
Version
Version 2.0
Description
Order No.
2RCA030573A0001
2RCA030894A0001
2RCA031135A0001
EUR
EUR
RET620
Transformer Protection and Control
Selected Order No. N
AA
5/6 7/8
1
9
IED
IEC
Main application
Example configuration
Analog inputs and outputs
AA
AA
AB
AC
No optional board
NN
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (2 x RJ-45 + 1 x LC)
with HSR/PRP
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC)
with HSR/PRP
No Communication module
Communication protocols
IEC 61850 (for Ethernet communication modules and IEDs
without a communication module )
Language
English
Front Panel
B
N
Option 2
Automatic voltage regulator
None
Power supply
48...250 V DC, 100...240 V AC
10 11 12 13 14 15 16 17 18
EUR
RET620
Transformer Protection and Control
Selected Order No. N
AA
5/6 7/8
1
9
10 11 12 13 14 15 16 17 18
2
2460 V DC
Version
Version 2.0
Description
Order No.
2RCA030573A0001
2RCA030894A0001
2RCA031135A0001
EUR
EUR
REF630
Feeder Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
IED
S
Standard
B
IEC
Main application
F
Distance option to be
selected Order No. 14 = B or D or F
or Order No. 15 = D
N = None
AB
AA = 4 I (I0 1/5A) + 5 U
N AC
N BA
N BB
N BC
AA
AB
AB = 23 BI + 18 BO
AC = 32 BI + 27 BO
AC
AD = 41 BI + 36 BO
AD
AE = 50 BI + 45 BO
AE
AA = 14 BI + 9 BO
AA
Communication Ethernet
Ethernet 100BaseFX (LC)
Communication protocol
IEC 61850
Language
Front Panel
Integrated local HMI
10 11 12 13 14 15 16 17 18
No local HMI
EUR
REF630
Feeder Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Option 1
Fault locator and synchro-check
All options
Z
N
None N
Option 2
Fault locator
Synchro-check
Distance protection
Power quality
None
Power supply
48...125 V DC A
Vacant digit
Vacant
Version
Version 1.2
Price
EUR
Order No.
2RCA021735
2RCA021736
Order No.
1KHL400040R0001
1KHL400444R0001
Price
EUR
0
0
1KHL400067R0001
1KHL400236R0001
1KHL400237R0001
0
0
1KHL400450R0001
Wall-mounting kit for direct rear wall mounting (with cabling to the
1KHL400452R0001
front) of one 6U half 19" housing IED
Wall-mounting kit (with cabling towards the mounting wall) for one
1KHL400200R0001
6U half 19" housing IED
1KHL400464R0001
Order No.
Price
EUR
19" rack mounting kit for one RTXP8 test switch (the test switch is
1KHL400465R0001
not included in the delivery)
19" rack mounting kit for one RTXP18 test switch (the test switch
is not included in the delivery)
1KHL400467R0001
19" rack mounting kit for one RTXP24 test switch (the test switch
is not included in the delivery)
1KHL400469R0001
EUR
REM630
Motor Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
IED
S
Standard
B
IEC
Main application
M
Functional application,preconfiguration
B
N
N = None
AA
AB
AB = 7I (Io 1/5A) + 3U
Available analog input option for
Preconfiguration N only
AC = 8I (Io 1/5A) + 2U
N AC
BA
BB
N BC
AA = 14 BI + 9 BO
AA
AB = 23 BI + 18 BO
AB
AC = 32 BI + 27 BO
AC
AD = 41 BI + 36 BO
AD
AE = 50 BI + 45 BO
AE
Communication Ethernet
Ethernet 100BaseFX (LC)
Communication protocol
IEC 61850
Language
Front Panel
Integrated local HMI A
No local HMI
Option 1
10 11 12 13 14 15 16 17 18
EUR
REM630
Motor Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
10 11 12 13 14 15 16 17 18
All options
Z
N
None N
Option 2
Underfrequency and overfrequency protection
(including rate of change)
None
Power supply
48...125 V DC A
Vacant digit
Vacant
Version
Version 1.2
Price
EUR
Order No.
2RCA021735
2RCA021736
2RCA023041
2RCA023042
2RCA023039
2RCA023040
Order No.
1KHL400040R0001
1KHL400444R0001
Price
EUR
0
0
1KHL400067R0001
1KHL400449R0001
1KHL400236R0001
1KHL400237R0001
0
0
1KHL400450R0001
Wall-mounting kit for direct rear wall mounting (with cabling to the
front) of one 6U half 19" housing IED
1KHL400452R0001
Wall-mounting kit (with cabling towards the mounting wall) for one
6U half 19" housing IED
1KHL400200R0001
1KHL400464R0001
Order No.
19" rack mounting kit for one RTXP8 test switch (the test switch is
not included in the delivery)
1KHL400465R0001
19" rack mounting kit for one RTXP18 test switch (the test switch is
1KHL400467R0001
not included in the delivery)
19" rack mounting kit for one RTXP24 test switch (the test switch is
1KHL400469R0001
not included in the delivery)
Price
EUR
Price
EUR
REM630
Motor Protection and Control
Selected Order No.
synchronous machine rotor
Electronic device for rotor earth fault detection in the excitation
circuit of synchronous machine.
Z
4
5/6 7/8
10 11 12 13 14 15 16 17 18
EUR
RET630
Transformer Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
IED
S
Standard
B
IEC
Main application
T
N = None
AA = 7 I (I0 1/5A) + 3 U
AA
AB
AB = 8 I (I0 1/5A) + 2 U
Available analog inputs option for
"preconfiguration" N only
N AC
N BA
N BB
N BC
AA = 14 BI + 9 BO
AA
AB
AB = 23 BI + 18 BO
AC = 32 BI + 27 BO
AC
AD = 41 BI + 36 BO
AD
AE = 50 BI + 45 BO
AE
Communication Ethernet
Ethernet 100BaseFX (LC)
Communication protocol
IEC 61850
Language
Front Panel
Integrated local HMI A
10 11 12 13 14 15 16 17 18
No local HMI
EUR
RET630
Transformer Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Option 1
Automatic voltage regulator and Under impedance protection
All option
Z
N
None
Option 2
Automatic voltage regulator
Over-excitation protection
None
Power supply
48...125 V DC A
Vacant digit
Vacant
Version
Version 1.2
Price
EUR
Order No.
2RCA023041
2RCA023042
2RCA023039
2RCA023040
Order No.
1KHL400040R0001
EUR
0
Price
1KHL400444R0001
1KHL400449R0001
1KHL400236R0001
1KHL400237R0001
1KHL400450R0001
1KHL400464R0001
Order No.
19" rack mounting kit for one RTXP8 test switch (the test
switch is not included in the delivery)
1KHL400465R0001
19" rack mounting kit for one RTXP18 test switch (the test
switch is not included in the delivery)
1KHL400467R0001
19" rack mounting kit for one RTXP24 test switch (the test
switch is not included in the delivery)
1KHL400469R0001
Price
EUR
EUR
REG630
Generator Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
IED
S
Standard
B
IEC
Main Application
G
Functional Application
N = No pre-configuration
A = Pre-configuration A
Analog Inputs/Outputs
AA = 5I + 4U
AC = 8I + 2U (Io 1/5A)
BA = 5I + 4U + 8mAin/RTD + 4mAout
AC
BA
BB
AA
AB
AB = 7I + 3U (Io 1/5A)
BC
Binary I/O
AA = 14BI + 9BO
AA
AB = 23BI + 18BO
AB
AC = 32BI + 27BO
AC
AD = 41BI + 36BO
AD
AE = 50BI + 45BO
AE
Communication Serial
Serial glass fibre (ST connector)
Communication Ethernet
Ethernet 100BaseFX (LC)
Communication Protocol
IEC 61850
Language
Language package
Front Panel
Integrated local HMI
E
F
Option 1
No options
Transformer differential protection for two-winding transformers
All options
A
B
Option 2
No options
10 11 12 13 14 15 16 17 18
EUR
REG630
Generator Protection and Control
Selected Order No.
Instructions / Order No. Pos. 1
Z
4
5/6 7/8
10 11 12 13 14 15 16 17 18
Power Supply
48...125 V DC A
Vacant Digit
Vacant
Version
Version 1.2
Price
EUR
Order No.
2RCA021735
2RCA021736
2RCA023041
2RCA023042
2RCA023039
2RCA023040
Order No.
1KHL400040R0001
1KHL400444R0001
0
0
1KHL400067R0001
1KHL400449R0001
1KHL400236R0001
1KHL400237R0001
0
0
1KHL400450R0001
Wall-mounting kit for direct rear wall mounting (with cabling to the
front) of one 6U half 19" housing IED
1KHL400452R0001
Wall-mounting kit (with cabling towards the mounting wall) for one
6U half 19" housing IED
1KHL400200R0001
1KHL400464R0001
Order No.
19" rack mounting kit for one RTXP8 test switch (the test switch is
not included in the delivery)
1KHL400465R0001
19" rack mounting kit for one RTXP18 test switch (the test switch
is not included in the delivery)
1KHL400467R0001
19" rack mounting kit for one RTXP24 test switch (the test switch
is not included in the delivery)
1KHL400469R0001
Price
EUR
Price
EUR
EUR
REF610
Feeder Protection
Selected Order No. REF610C
Instructions / Order No. Start Pos.
H
8
10 11 12 13
14
Current inputs
Phase current inputs 5 A
Power supply
110-240 V AC/110-250 V DC
2xDI (110/125/220/250 VDC), 3xPO, 2xSO
Complete IED
None
Communication module
RS-485
Language set
(IEC) English, Swedish, Finnish
01
02
03
Order No.
1MRS050696
1MRS050831
1MRS050694
1MRS050695
1MRS050697
1MRS061208
1MRS050783
1MRS061207
1MRS050698
Price
EUR
0
0
0
0
0
0
0
0
0
EUR
REM610
Motor Protection
Selected Order No. REM610C
Instructions / Order No. Start Pos.
H
8
10 11 12 13
14
Current inputs
Power supply
110-240 V AC/110-250 V DC
2xDI (110/125/220/250 VDC), 3xPO, 2xSO
Complete IED
None
Communication module
RS-485 R
Language set
(IEC) English, Swedish, Finnish
01
02
03
Order No.
1MRS050696
Price
EUR
0
1MRS050831
1MRS050694
1MRS050695
1MRS050697
1MRS061208
0
0
0
0
0
1MRS050783
1MRS061207
1MRS050698
0
0
0
EUR
REU610
Voltage Protection
Selected Order No. REU610C
Instructions / Order No. Start Pos.
10 11 12 13
R
14
Voltage inputs
Phase -to-phase rated voltages (100/110/115/120V)
V
V
Complete IED
None
Communication module
RS-485
Language set
(IEC) English, Swedish, Finnish
01
02
03
Order No.
1MRS050696
Price
EUR
0
1MRS050831
1MRS050694
1MRS050695
1MRS050697
1MRS061208
0
0
0
0
0
1MRS090937
1MRS061207
1MRS050698
0
0
0
EUR
COM600
Station Automation Device
Selected Order No. COM600
Instructions / Order No. Start Pos.
10 11 12
COM600
Power supply
Power supply110 - 220 V DC, 100 - 240 V AC
None
HMI
Web HMI application (display unit not included)
FDIR (fault detection, fault isolation and load restroation) including an FDIRadapted Web HMI
None
Master protocols
One master protocol
Slave protocols
None
Optional software
Data historian
Logic processor
Data historian and Logic processor
None
P
N
GOOSE Analyzer
GOOSE Analyzer enabled
No GOOSE Analyzer
Vacant digit
None
Vacant digit
None
Vacant digit
None
Version
Version 4.0
EUR
PCM600
Programing Tool
Item
PCM600-26
Order No.
Description
PCM600-26
Price
EUR
PML630
Load Shedding Controller
Selected Order No. U
AA A
5/6 7/8
10 11 12 13 14 15 16 17 18
IED
PML630, 4U half 19" housing & connector set
Standard
IEC
Main application
Power Management
Functional Application
Load Shedding
Analog Inputs/Outputs
AA = 4I + 5U (Io 1/5A)
AA
AB = 8I + 2U (Io 1/5A)
AB
Binary I/O
14BI + 9BO
AA
Communication (Serial)
Serial glass fibre (ST connector)
Communication (Ethernet)
Ethernet 100Base-FX (LC connector)
Communication protocol
IEC 61850
Language
English
Front Panel
Integrated LHMI
Option 1
cPMS: Configuration A
Option 2
No Configurations
Power supply
48...125 V DC A
Vacant digit
Vacant
Version
Version 1.2
EUR
RIO600
Remote I/O Unit
Price
EUR
Item
Order No.
Description
MOD600ADOM4R
MOD600ADOM4R
MOD600APSMH07
MOD600APSMH07
MOD600APSML07
MOD600APSML07
MOD600CLECMIR
MOD600BLECMIR
MOD600ADIM8H
MOD600ADIM8H
MOD600ADIM8L
MOD600ADIM8L
MOD600ARTD4
MOD600ARTD4
RTD/mA-input module
MOD600AAOM4
MOD600AAOM4
REC601
Wireless Controller
Selected Order No.
Instructions / Order No. Start Pos.
REC601
10 11 12 13 14
Valid
EUR
Product
REC601
1.0
Power Supply
English
Additional Components
REC603
Wireless Controller
Selected Order No.
Instructions / Order No. Start Pos.
REC603
10 11 12 13 14
Product
REC603
1.0
Power Supply
A
A
English
Additional Components
Price
EUR
Accessories
Order No.
2RCA028227
2RCA028171
0
0
Null-modem cable
Roof antenna with 150cm cable
2RCA027558
2RCA028207
0
0
Supporting Products
Order No.
M2M Gateway
M2M Gateway Enterprise Edition
2RCA028228
2RCA028229
Price
EUR
0
0
Valid
EUR
RER601
Wireless Gateway
Selected Order No.
Instructions / Order No. Start Pos.
RER601
10 11 12 13 14
Valid
EUR
Product
RER601
1.0
Power Supply
6 26 VDC
Inputs and Outputs
None
Communication Interface
Ethernet 10/100BaseT (RJ45) + RS232 + selectable
RS232/422/485
Communication Protocols
A
A
English
Additional Components
RER603
Wireless Gateway
Selected Order No.
Instructions / Order No. Start Pos.
RER603
10 11 12 13 14
Product
RER603
1.0
Power Supply
6 26 VDC
Inputs and Outputs
8 BI + 2 BO
Communication Interface
Ethernet 10/100BaseT (RJ45) + RS232 + selectable
RS232/422/485
Communication Protocols
A
A
English
Additional Components
Accessories
Order No.
2RCA027811P0001
2RCA028207
Supporting Products
Order No.
M2M Gateway
M2M Gateway Enterprise Edition
2RCA028228
2RCA028229
Price
EUR
0
0
Price
EUR
0
0
Valid
EUR
RTU
Remote Terminal Unit
Price
EUR
Item
Order No.
Description
560CMD11 R0001
1KGT023400R0001
560CMD11, 24 VDC
560CIG10 R0001
1KGT021600R0001
560CIG10 R0002
1KGT021600R0002
560CID11 R001
1KGT030400R0001
560CID11 R002
1KGT030400R0002
560PSU40 R0001
1KGT011600R0001
DIN rail Power supply unit for 110..220 VDC, 230 VAC
560PSU41 R0001
1KGT017700R0001
23VG23 R0001
1KGT005500R0001
23VG24 R0001
1KGT005600R0001
211BID51 R0001
1KGT024100R0001
211BID51 R0002
1KGT024100R0002
211BOD52 R0002
1KGT024200R0002
211AID50 R0001
1KGT024000R0001
211AID50 R0002
1KGT024000R0002
560CVD03 R0031
1KGT028000R0031
560CVD03 R0035
1KGT028000R0035
560CVD03 R0051
1KGT028000R0051
560CVD03 R0055
1KGT028000R0055
560CVD11 R0021
1KGT030000R0021
560CVD11 R0025
1KGT030000R0025
560CVD11 R0041
1KGT030000R0041
560CVD11 R0045
1KGT030000R0045
560KCA01 R0001
1KGT030800R0001
211ADD52 R0001
1KGT023900R0001
Basic license 50 DP
1KGT201446R0001
Basic License
1KGT201443R0001
Basic License
1KGT201440R0001
Basic License
PLC/Archives license 50 DP
1KGT201447R0001
PLC/Archives License
1KGT201444R0001
PLC/Archives License
1KGT201441R0001
PLC/Archives License
RTUtil560
1KGT210203R0001
MULTIPROGwt
1KGT210204R0001
560CMG10 R0001
1KGT017600R0001
23BE40 R0011
1KGT011100R0011
23BE40 R0012
1KGT011100R0012
23BE50 R0001
1KGT020900R0001
23BA40 R0011
1KGT011200R0011
560FOC40 R0001
1KGT011500R0001
560CVD03 R0021
1KGT028000R0021
560CVD03 R0025
1KGT028000R0025
560CVD03 R0041
1KGT028000R0041
560CVD03 R0045
1KGT028000R0045
1KGT201437R0001
Basic License
1KGT201438R0001
PLC/Archives License
HMI license 50 DP
1KGT201448R0001
HMI License
1KGT201445R0001
HMI License
1KGT201442R0001
HMI License
1KGT201439R0001
HMI License
RTUtil61850
1KGT210238R0001
K
6
A
8
12
13
14
15
16
115
118
127
129
133
Software revision
K
Current revision
Functionality level
C = Control
B = Basic
M = Multi
Power supply
A = Medium
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 110/125/220 V dc
threshold voltage: Ut = 80 V dc
B = High
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 220 V dc
threshold voltage: Ut = 155 V dc
C = Low
power supply: Ur = 24/48/60 V dc
digital inputs: Ur = 24/48/60/110/125/220 V dc
threshold voltage: Ut = 18 V dc
Reserved digit
Sensor inputs
A = without sensor input
A = fixed display
B = external disply module
Language options
English-German
001
English-Swedish
002
English-Finnish
003
English - Portuguese
007
English - Polish
008
English - Russian
009
English - Spanish
010
English - Czech
012
Order No.
1MRS100116
1MRS100117
1MRS100052
EUR
1MRS100143
Optional SW for REF 541/543/545 and for REC 523. Current Waveform
Distortion Measurement. (PQCU3H)
1MRS100512
Optional SW for REF 541/543/545 and for REC 523. Voltage Waveform
Distortion Measurement. (PQVO3H)
1MRS100513
1MRS100514
1MRS100058
Power quality
Fault locator
Optional SW for REF541/543/545 Fault Locator (FLOC)
K
6
A
8
12
13
14
15
16
EUR
B
6
A
8
12
13
14
15
212
213
6 x I (1/5 A) + 3 x U (100 V)
15 BI + 14 BO
214
6 x I (1/5 A) + 3 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
215
7 x I (1/5 A) + 2 x U (100 V)
15 BI + 14 BO
216
7 x I (1/5 A) + 2 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
217
8 x I (1/5 A) + 1 x U (100 V)
15 BI + 14 BO
218
8 x I (1/5 A) + 1 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
219
222
223
6 x I (1/5 A) + 3 x U (100 V)
25 BI + 20 BO
224
6 x I (1/5 A) + 3 x U (100 V)
25 BI + 20 BO + 8 RTD/analogue inputs + 4 analogue outputs
225
7 x I (1/5 A) + 2 x U (100 V)
25 BI + 20 BO
226
7 x I (1/5 A) + 2 x U (100 V)
25 BI + 20 BO + 8 RTD/analogue inputs + 4 analogue outputs
227
8 x I (1/5 A) + 1 x U (100 V)
25 BI + 20 BO
228
8 x I (1/5 A) + 1 x U (100 V)
25 BI + 20 BO + 8 RTD/analogue inputs + 4 analogue outputs
229
Software revision
Current revision
Functionality level
M = Motor
G = Generator
Power supply
A = Medium
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 110/125/220 V dc
threshold voltage: U t = 80 V dc
B = High
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 220 V dc
threshold voltage: U t = 155 V dc
C = Low
power supply: Ur = 24/48/60 V dc
digital inputs: Ur = 24/48/60/110/125/220 V dc
threshold voltage: U t = 18 V dc
Reserved digit
Sensor inputs
A = fixed display
B = external disply module
16
EUR
B
6
A
8
12
13
14
15
16
Language options
English-German
001
English-Swedish
002
English-Finnish
003
English-Russian
009
Order No.
REK 510-AA
EUR
EUR
A
6
12
13
14
15
230
6 x I (1/5 A) + 3 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
233
7 x I (1/5 A) + 2 x U (100 V)
15 BI + 14 BO
231
7 x I (1/5 A) + 2 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
234
8 x I (1/5 A) + 1 x U (100 V)
15 BI + 14 BO
232
8 x I (1/5 A) + 1 x U (100 V)
15 BI + 14 BO + 8 RTD/analogue inputs + 4 analogue outputs
235
240
243
7 x I (1/5 A) + 2 x U (100 V)
25 BI + 20 BO
241
7 x I (1/5 A) + 2 x U (100 V)
25 BI + 20 BO + 8 RTD/analogue inputs + 4 analogue outputs
244
8 x I (1/5 A) + 1 x U (100 V)
25 BI + 20 BO
242
8 x I (1/5 A) + 1 x U (100 V)
25 BI + 20 BO + 8 RTD/analogue inputs + 4 analogue outputs
245
250
251
8 x I (1/5 A) + 1 x U (100 V)
30 BI + 28 BO
252
Software revision
A
Current revision
Functionality level
C
C = Control
B = Basic
M = Multi
Power supply
A = Medium
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 110/125/220 V dc
threshold voltage: U t = 80 V dc
B = High
power supply: Ur = 110/120/220/240 V ac; 110/125/220 V dc
digital inputs: Ur = 220 V dc
threshold voltage: U t = 155 V dc
C = Low
power supply: Ur = 24/48/60 V dc
digital inputs: Ur = 24/48/60/110/125/220 V dc
threshold voltage: U t = 18 V dc
Reserved digit
Reserved digit
A = fixed display
B = external disply module
16
EUR
A
6
12
13
14
15
16
Language options
English-German
001
English-Swedish
002
English-Finnish
003
English-Portuguese
007
English-Polish
008
English-Russian
009
English-Spanish
010
Order No.
1MRS100144
Price
EUR
0
EUR
REF542plus
Feeder Terminal
Selected Order No. 7
8 9/10 11 12 13 14 15
Family code
REF542plus
Application area
REF542plus for normal operation
For special applications like marine, offshore and for motor protection
in explosive area please see in CCP or contact ABB sales office.
Static I/O
Static I/O without control continuity check
If Order No. 6 = 5, 6, 7 or 8,
Order No. 7 and 8 can be only 5, 6, 7, 8 or N
If Order No. 6 = 5, 6, 7 or 8,
Order No. 7 and 8 can be only 5, 6, 7, 8 or N
If Order No. 6 = 5, 6, 7 or 8,
Order No. 7 and 8 can be only 5, 6, 7, 8 or N
Binary I/O3 - 19-72 V/14 V DC, interconnected input, with static channel
As no. 5 + interconnected binary inputs + one static output channel for
energy metering
If Order No. 6 = 5, 6, 7 or 8,
Order No. 7 and 8 can be only 5, 6, 7, 8 or N
If Order No. 6 = 9, A, B or C
Order No. 7 and 8 can be only 9, A, B, C or N
If Order No. 6 = 9, A, B or C
Order No. 7 and 8 can be only 9, A, B, C or N
If Order No. 6 = 9, A, B or C
Order No. 7 and 8 can be only 9, A, B, C or N
Binary I/O3 - 88-132 V/50 V DC, interconnected input, with static channel
As no. 9 + interconnected binary inputs + one static output channel for
energy metering
If Order No. 6 = 9, A, B or C
Order No. 7 and 8 can be only 9, A, B, C or N
If Order No. 6 = D or E
Order No. 7 and 8 can be only D, E or N
If Order No. 6 = D or E
Order No. 7 and 8 can be only D, E or N
If Order No. 6 = F or G
Order No. 7 and 8 can be only F, G or N
If Order No. 6 = F or G
Order No. 7 and 8 can be only F, G or N
G
N
01
10
3 sensors + 3 VT + 1 CT/0.2 A + 1 VT
11
3 sensors + 3 sensors + 1 CT
12
13
14
3 sensors + 3 sensors + 1 VT + 1 VT
15
3 sensors + 3 CT + 1 CT/0.2 A + 1 VT
16
17
Mix of transformers
3 CT + 3 VT + 1 CT/0.2 A + 1 VT
30
3 VT + 3 VT + 1 CT/0.2 A + 1 CT/0.2 A
31
EUR
REF542plus
Feeder Terminal
Selected Order No. 7
8 9/10 11 12 13 14 15
3 CT + 3 CT
32
3 CT + 3 CT + 1 CT/0.2 A+ 1 VT
33
3 VT + 3 VT + 1 VT
34
3 CT + 3 VT + 1 CT
35
3 CT + 3 VT + 1 CT + 1 VT
36
3 CT + 0 VT + 1 CT
37
3 CT + 0 VT + 1 CT/0.2 A
38
3 CT + 3 VT + 1 CT/0.2 A + 1 CT/0.2 A
39
3 CT + 3 VT + 1 VT + 1 VT
40
3 CT + 3 CT + 1 CT + 1 CT
41
3 CT + 3 CT + 1 CT + 1 VT
42
3 CT + 3 VT + 1 CT + 1 CT
43
Communication module
IED without communication (communication module)
LON-LAG 1.4
To be used for ABB LON per lag 1.4 protocol
Enclosure versions
Normal base unit
HMI variants
No HMI
8
Price
Order No.
1VCF750142821
EUR
0
1VCF750142820
I-Button (protection)
1VCF750193801
I-Button (control)
1VCF750193802
1MRS050942
1MRS151022
1MRS151062
1YHT500001810
1YHT500001811
1MRS123009
1MRS123010
EUR
REA 101
Arc Protection IED with extension units and accessories
Price
Item
Order No.
Description
REA101-AAA
REA 101-AAA
Arc Protection 50-60 Hz, 110-240 V AC 110-250 V DC Central unit with optolink connectors for
plastic fiber. Includes mounting kit 1MRS050209 for flush mounting
EUR
0
REA101-AAAG
REA 101-AAAG
Arc Protection 50-60 Hz, 110-240 V AC, 110-250 V DC Central unit with optolink connectors for
glass fibre. Includes mounting kit 1MRS050209 for flush mounting
REA101-CAA
REA 101-CAA
Arc Protection 24-60 V DC Central unit with optolink connectors for plastic fiber.
Includes mounting kit 1MRS050209 for flush mounting
REA101-CAAG
REA 101-CAAG
Arc Protection 24-60 V DC Central unit with optolink connectors for glass fiber.
Includes mounting kit 1MRS050209 for flush mounting
REA103-AA
REA103-AA
REA105-AA
REA105-AA
REA107-AA
REA 107-AA
Arc protection system (Relays, module) Extension unit for lens type sensors.
1MRS060196
1MRS050254
1MRS050254
1MRS050240
1MRS050240
1MRS050241
1MRS050241
1MRS050258
1MRS050258
Cables for connecting REA 101 to an extension unit, or the extension units to each other
1MRS120511.001
1MRS120511.001
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 1 m
1MRS120511.003
1MRS120511.003
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 3 m
1MRS120511.005
1MRS120511.005
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 5 m
1MRS120511.010
1MRS120511.010
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 10 m
1MRS120511.015
1MRS120511.015
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 15 m
1MRS120511.020
1MRS120511.020
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 20 m
1MRS120511.030
1MRS120511.030
Cables for serial interface connection 30 m +/- 3% Connection cable with RJ-45 connectors between
main unit REA 101 and extension units REA 103/105/107, length 30 m
1MRS120511.040
1MRS120511.040
Cables for serial interface connection Connection cable with RJ-45 connectors between main unit
REA 101 and extension units REA 103/105/107, length 40 m
Plastic fiber optolink for signal transfer between REA 101 central units
SPA-ZF AA 1
RS 951 007-AA
SPA-ZF AA 10
RS 951 007-DA
SPA-ZF AA 2
RS 951 007-GA
SPA-ZF AA 20
RS 951 007-EA
SPA-ZF AA 3
RS 951 007-BA
SPA-ZF AA 30
RS 951 007-FA
SPA-ZF AA 5
RS 951 007-CA
1MRS120512.005
1MRS120512.010
1MRS120512.010
1MRS120512.015
1MRS120512.015
1MRS120512.020
1MRS120512.020
1MRS120512.025
1MRS120512.025
1MRS120512.030
1MRS120512.030
1MRS120512.040
1MRS120512.040
1MRS120512.050
1MRS120512.050
1MRS120512.060
1MRS120512.060
1MSC380018.100
1MSC380018.300
1MSC380018.300
1MSC380018.500
1MSC380018.500
SYJ-ZBC 1A1
SYJ-ZBC 1A1
ST connector
REA 101
Arc Protection IED with extension units and accessories
Price
Item
Order No.
Description
SYJ-ZBC 1A2
SYJ-ZBC 1A2
ST splice adapter
1MSC990016
1MSC990016
1MRS060743
1MRS060743
Light collecting lens without fiber for Lens type sensor for REA 107
1MRS124000
Cable tie package including 100 pieces for fixing sensor cables. The cable tie itself is to be fixed in a
4,8 mm trough hole drilled in a metal sheet.
1MRS124000
EUR
1MRS120534-1.5
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107
and REF 610 and REF 615, length 1.5 m
1MRS120534-3
1MRS120534-3
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107
and REF 610 and REF 615, length 3 m
1MRS120534-5
1MRS120534-5
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107
and REF 610 and REF 615, length 5 m
1MRS120534-7
1MRS120534-7
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107
and REF 610, length 7 m
1MRS120534-10
1MRS120534-10
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107
and REF 610, length 10 m
1MRS120534-15
1MRS120534-15
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107,
length 15 m
1MRS120534-20
1MRS120534-20
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107,
length 20 m
1MRS120534-25
1MRS120534-25
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107,
length 25 m
1MRS120534-30
1MRS120534-30
Pre-manufactured lens type arc-protection sensor with optical fiber and DNP-connector for REA 107,
length 30 m
Pre-manufactured lens sensors for REA 101, REA 103 and REA 105
1MRS120536-2
1MRS120536-2
Pre-manufactured lens type arc protection sensor with optical fiber and ST-connector for REA
101/103/105 units, length 2 m
1MRS120536-3
1MRS120536-3
Pre-manufactured lens type arc protection sensor with optical fiber and ST-connector for REA
101/103/105 units, length 3 m
1MRS120536-5
1MRS120536-5
Pre-manufactured lens type arc protection sensor with optical fiber and ST-connector for REA
101/103/105 units, length 5 m
1MRS120536-10
1MRS120536-10
Pre-manufactured lens type arc protection sensor with optical fiber and ST-connector for REA
101/103/105 units, length 10 m
SPACOM
Protection IED
Item
Price
EUR
Order No.
Description
RS 611 006-AA
RS 611 006-CA
RS 611 006-DA
RS 611 006-FA
RS 611 051-AA
RS 611 051-CA
RS 611 051-DA
RS 611 051-FA
RS 641 014-AA
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 50 Hz, 80-265 V AC/DC Functionality: Versatile multifunction relay for the
RS 641 015-AB
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 50 Hz, 80-265 V AC/DC Functionality: Versatile multifunction relay for the
RS 641 014-CA
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 50 Hz, 18-80 V DC Functionality: Versatile multifunction relay for the prot
RS 641 015-CB
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 50 Hz, 18-80 V DC Functionality: Versatile multifunction relay for the prot
RS 641 014-DA
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 60 Hz, 80-265 V AC/DC Functionality: Versatile multifunction relay for the
RS 641 015-DB
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 60 Hz, 80-265 V AC/DC Functionality: Versatile multifunction relay for the
RS 641 014-FA
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 60 Hz, 18-80 V DC Functionality: Versatile multifunction relay for the prot
RS 641 015-FB
Motor protection relay with: Over and undercurrent protection, earth-fault protection,
thermal overload for motors, phase reversal/unbalance protection, motor start-up
supervision 60 Hz, 18-80 V DC Functionality: Versatile multifunction relay for the prot
RS 485 004-AA
SPER 1C1-AA
RS 485 002-AA
SPER 1C2-AA
RS 485 003-AA
1MRS061021
1MRS061021
Supervision relay Securing clanp for vibration-proof installation of SPER 1B1 C4.
PC-ZL 2
RS 961 051-AA
SPE-ZR 3
RS 961 015-AA
Supervision relay Current limiting resistor for SPER 1B1 C4 and SPER 1C1.
SPACOM
RS 611 206-AA
RS 611 206-CA
RS 611 206-CA
RS 611 206-DA
RS 611 206-DA
RS 611 206-FA
RS 611 206-FA
RS 611 251-AA
RS 611 251-AA
RS 611 251-CA
RS 611 251-CA
RS 611 251-DA
RS 611 251-DA
SPACOM
Protection IED
Price
EUR
Item
Order No.
Description
RS 611 251-FA
RS 611 251-FA
RS 641 214-AA
RS 641 214-AA
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 215-AB
RS 641 215-AB
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 214-CA
RS 641 214-CA
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 215-CB
RS 641 215-CB
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 214-DA
RS 641 214-DA
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 215-DB
RS 641 215-DB
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 214-FA
RS 641 214-FA
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
RS 641 215-FB
RS 641 215-FB
SPAM 150 C with test switch: Motor protection relay with: Over and undercurrent
protection, earth-fault protection, thermal overload for motors, phase
reversal/unbalance protection, motor start-up supervision
SACO
Annunciator Unit
Price
Item
Order No.
Description
SACO 16D1-AA
RS 811 016-AA
SACO 16D1-BA
RS 811 016-BA
SACO 16D3-AA
RS 811 163-AA
SACO 16D3-BA
RS 811 163-BA
SACO 64C5B
RS 813 064-AB
Signal grouping module Matrix for grouping of output signals. The unit has 4*16 inputs
and 4*16 outputs and it is delivered with one set of programming wires (SWIR 39)
SACO 64D4-0-AA
RS 811 640-AA
SACO 64D4-0-BA
RS 811 640-BA
SACO 64D4-1-AA
RS 811 641-AA
SACO 64D4-1-BA
RS 811 641-BA
Annunciator unit 19-70 V DC + 80-265 V AC/DC Alarm system with 16 on/off channels
SACO 64D4-2-AA
RS 811 642-AA
SACO 64D4-2-BA
RS 811 642-BA
Annunciator unit 19-70 V DC + 80-265 V AC/DC Alarm system with 32 on/off channels
SACO 64D4-3-AA
RS 811 643-AA
SACO 64D4-3-BA
RS 811 643-BA
Annunciator unit 19-70 V DC + 80-265 V AC/DC Alarm system with 48 on/off channels
SACO 64D4-AA
RS 811 644-AA
SACO 64D4-BA
RS 811 644-BA
Annunciator unit 19-70 V DC + 80-265 V AC/DC Alarm system with 64 on/off channels
SWDM 3A1
RS 962 031-AA
EUR
RS 952 001-AA
Cables for serial interface connection SACO 16D2 <--> SACO 16D2 Cable for linking
of the 16 group signals between seven SACO 16D2 modules
SWIR 25
RS 952 002-BA
Cables for serial interface connection Cable for linking SPA bus <--> subracks, for
system with three racks
SWIR 26
RS 952 002-CA
Cables for serial interface connection Cable for linking SPA bus <--> subracks, for
system with four racks
SWIR 27
RS 952 002-DA
Cables for serial interface connection Cable for linking SPA bus <--> subracks, for
system with five racks
SWIR 28
RS 952 002-FA
Cables for serial interface connection Cable for linking SPA bus <--> subracks, for
system with six racks
REC 523
Remote Monitoring and Control Unit
Item
Price
EUR
Order No.
Description
REC523F 032AAA
REC523F 032AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, wall mounted
REC523F 032CAA
REC523F 032CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, wall mounted
REC523F 033AAA
REC523F 033AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, 3 VT 100 V,
wall mounted
REC523F 033CAA
REC523F 033CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, 3 VT 100 V, wall
mounted
REC523F 034AAA
REC523F 034AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 4 CT 1/5 A, 3 VT 230 V,
wall mounted
REC523F 034CAA
REC523F 034CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 4 CT 1/5 A, 3 VT 230 V, wall
mounted
REC523F 037AAA
REC523F 037AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, flush
mounted,
REC523F 037CAA
REC523F 037CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, flush mounted
REC523F 038AAA
REC523F 038AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, 3 VT 100 V,
flush mounted
REC523F 038CAA
REC523F 038CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, 3 VT 100 V, flush
mounted
REC523F 039AAA
REC523F 039AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 4 CT 1/5 A, 3 VT 230 V,
flush mounted
REC523F 039CAA
REC523F 039CAA
REC523F 054AAA
REC523F 054AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 1 CT 0,2/1 A, 4 CT 1/5 A,
4 VT 100 V, wall mounted
REC523F 054CAA
REC523F 054CAA
REC523F 059AAA
REC523F 059AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 1 CT 0,2/1 A, 4 CT 1/5 A,
4 VT 100 V, flush mounted
REC523F 059CAA
REC523F 059CAA
REC523F 060AAC
REC523F 060AAC
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 9 sensor channels
(current sensor or voltage divider), wall mounted
REC523F 060CAC
REC523F 060CAC
Remote monitoring and control unit Uaux: 18 - 80 V DC, 9 sensor channels (current
sensor or voltage divider), wall mounted
REC523F 061AAA
REC523F 061AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 6 CT 1/5 A, 3 VT 100 V,
wall mounted
REC523F 061CAA
REC523F 061CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 6 CT 1/5 A, 3 VT 100 V, wall
mounted
REC523F 062AAA
REC523F 062AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, 6 VT 100 V,
wall mounted
REC523F 062CAA
REC523F 062CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, 6 VT 100 V, wall
mounted
REC523F 065AAC
REC523F 065AAC
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 9 sensor channels
(current sensor or voltage divider), flush mounted
REC523F 065CAC
REC523F 065CAC
Remote monitoring and control unit Uaux: 18 - 80 V DC, 9 sensor channels (current
sensor or voltage divider), flush mounted
REC523F 066AAA
REC523F 066AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 6 CT 1/5 A, 3 VT 100 V,
flush mounted
REC523F 066CAA
REC523F 066CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 6 CT 1/5 A, 3 VT 100 V, flush
mounted
REC523F 067AAA
REC523F 067AAA
Remote monitoring and control unit Uaux: 80 - 265 V AC/DC, 3 CT 1/5 A, 6 VT 100 V,
flush mounted
REC523F 067CAA
REC523F 067CAA
Remote monitoring and control unit Uaux: 18 - 80 V DC, 3 CT 1/5 A, 6 VT 100 V, flush
mounted
REC523F 071AAB
REC523F 071AAB
REC523F 071CAB
REC523F 071CAB
REC523F 072AAB
REC523F 072AAB
REC 523 F
REC 523
Remote Monitoring and Control Unit
Item
Order No.
Description
REC523F 072CAB
REC523F 072CAB
Price
EUR
0
1MRS110006-001
1MRS110011-001
1MRS110011-001
Protocol for REC 523 (E version): SPA, LON and DNP 3.0 x)
1MRS110012-001
Protocol for REC 523 (E version): SPA, LON and Modbus (both the RTU and
ASCII modes) x)
1MRS110012-001
x) DNP 3.0 and Modbus protocols are only available in software revision E
Revision E units, please see below
Optional functionality to be ordered together with the IED
Power quality
1MRS100512
1MRS100512
Optional SW for REF 541/543/545 and for REC 523. Current Waveform Distortion
Measurement. (PQCU3H)
1MRS100513
1MRS100513
Optional SW for REF 541/543/545 and for REC 523. Voltage Waveform Distortion
Measurement. (PQVO3H)
1MRS100143
Optional SW for REF 541/543/545 and for REC 523. Power Factor Controller. (COPFC)
1MRS120523
1MRS 120523
1MRS050239
1MRS 050239
REC 523E, to be used only when DNP 3.0 or Modbus protocols are needed
REC523E 032AAA
REC523E 032AAA
Remote monitoring and control unit 80-265 V AC/DC 3 current transformers, In = 1/5 A
(wall mounted)
REC523E 032CAA
REC523E 032CAA
Remote monitoring and control unit 18-80 V DC 3 current transformers, In = 1/5 A, (wall
mounted)
REC523E 033AAA
REC523E 033AAA
Remote monitoring and control unit 80-265 V AC/DC 3 current transformers, In = 1/5 A.
3 voltage transformers, Un = 100/110/115/120 V, (wall mounted)
REC523E 033CAA
REC523E 033CAA
REC523E 034AAA
REC523E 034AAA
Remote monitoring and control unit 80-265 V AC/DC 4 current transformers, In = 1/5 A.
3 voltage transformers, Un = 230 V, (wall mounted)
REC523E 034CAA
REC523E 034CAA
REC523E 037AAA
REC523E 037AAA
Remote monitoring and control unit 80-265 V AC/DC 3 current transformers, In = 1/5 A,
(flush mounted)
REC523E 037CAA
REC523E 037CAA
Remote monitoring and control unit 18-80 V DC 3 current transformers, In = 1/5 A, (flush
mounted)
REC523E 038AAA
REC523E 038AAA
Remote monitoring and control unit 80-265 V AC/DC 3 current transformers, In = 1/5 A.
3 voltage transformers, Un = 100/110/115/120 V, (flush mounted)
REC523E 038CAA
REC523E 038CAA
REC523E 039AAA
REC523E 039AAA
Remote monitoring and control unit 80-265 V AC/DC 4 current transformers, In = 1/5 A.
3 voltage transformers, Un = 230 V, (flush mounted)
REC523E 039CAA
REC523E 039CAA
REC523E 060AAC
REC523E 060AAC
Remote monitoring and control unit 80-265 V AC/DC 9 sensor channels (current or
voltage). Rogowski current sensor or voltage dividers, (wall mounted)
REC523E 060CAC
REC523E 060CAC
Remote monitoring and control unit 18-80 V DC 9 sensor channels (current or voltage).
Rogowski current sensor or voltage dividers, (wall mounted)
REC523E 061AAA
REC523E 061AAA
Remote monitoring and control unit 80-265 V AC/DC 6 current transformers 1/5 A. 3
voltage transformers 100 V, (wall mounted)
REC523E 061CAA
REC523E 061CAA
Remote monitoring and control unit 18-80 V DC 6 current transformers 1/5 A. 3 voltage
transformers 100 v, (wall mounted)
REC 523
Remote Monitoring and Control Unit
Price
EUR
Item
Order No.
Description
REC523E 062AAA
REC523E 062AAA
Remote monitoring and control unit 80-625 V AC/DC 3 current transformers 1/5. 6
voltage transformers 100 V, (wall mounted)
REC523E 062CAA
REC523E 062CAA
Remote monitoring and control unit 18-80 V DC 3 current transformers 1/5 A. 6 voltage
transformers 100 V, (wall mounted)
REC523E 065AAC
REC523E 065AAC
Remote monitoring and control unit 80-265 V AC/DC 9 sensor channels (current or
voltage). Rogowski current sensor or voltage dividers, (flush mounted)
REC523E 065CAC
REC523E 065CAC
Remote monitoring and control unit 18-80 V DC 9 sensor channels (current or voltage).
Rogowski current sensor or voltage dividers, (flush mounted)
REC523E 066AAA
REC523E 066AAA
Remote monitoring and control unit 80-265 V AC/DC 6 current transformers 1/5 A. 3
voltage transformers 100 V, (flush mounted)
REC523E 066CAA
REC523E 066CAA
Remote monitoring and control unit 18-80 V DC 6 current transformers 1/5 A. 3 voltage
transformers 100 V, (flush mounted)
REC523E 067AAA
REC523E 067AAA
Remote monitoring and control unit 80-265 V AC/DC 3 current channels 1/5 A. 6 voltage
channels 100 V, (flush mounted)
REC523E 067CAA
REC523E 067CAA
Remote monitoring and control unit 18-80 V DC 3 current transformers 1/5 A. 6 voltage
transformers 100 V, (flush mounted)
RER, SPA-ZC
Bus Connection Modules and Protocol Converters
Price
EUR
Item
Order No.
Description
SPA-ZC 302-BA
SPA-ZC 302-BA
Profibus-DPV1/SPA Gateway Auxiliary voltage 110V...240V AC/DC Delivery includes, SPA-ZC 302
gateway module, SPA-ZC 302 configuration CD, Printed Manual 1MRS755014, Connection cable
1MRS120539 for connecting of relay to gateway module, Connection cabl
RER103-BB
RER 103 BB
RER103-MM
RER 103 MM
RER123-BB
1MRS090715-BB
RER123-MM
1MRS090715-MM
RER133
RER133
Bus Connection Module Communicate IT Bus Connection Module RER 133 acts as an interfacing unit
between RE_ 54_ host device and Modbus Or DNP 3.0 system
1MRS060023
Blank plate
Option cards for RER Blank plate for RER 111 and RER 125, used to cover empty slots.
SPA-ZC 17BB2A
RS 951 014-AA
Bus connection module 80-265 V AC/DC Transmitter: plastic fibre / Receiver: plastic fibre. For SPACOM
SPA-ZC 17MM2A
RS 951 014-GA
Bus connection module 80-265 V AC/DC Transmitter: glass fibre / Receiver: glass fibre. For SPACOM
SPA-ZC17BB2A/S
RS 951 014-AB
Bus connection module 80-265 V AC/DC Transmitter: plastic fibre / Receiver: plastic fibre. For SACO
SPA-ZC17BB2C/S
RS 951 014-BB
Bus connection module 18-80 V DC Transmitter: plastic fibre / Receiver: plastic fibre. For SACO
SPA-ZC17MM2A/S
RS 951 014-GB
Bus connection module 80-265 V AC/DC Transmitter: glass fibre / Receiver: glass fibre. For SACO
SPA-ZC17MM2C/S
RS 951 014-HB
Bus connection module 18-80 V DC Transmitter: glass fibre / Receiver: glass fibre. For SACO
SPA-ZC 21BB
RS 951 021-AA
SPA-ZC 21MM
RS 951 021-DA
SPA-ZC 21BB/S
RS 951 021-AB
Bus connection module Transmitter: plastic fibre / Receiver: plastic fibre. For SACO
SPA-ZC 21MM/S
RS 951 021-DB
Bus connection module Transmitter: glass fibre / Receiver: glass fibre. For SACO
SPA-ZC22A0B2M
RS 951 027-BA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter1 / Receiver1 + Transmitter2 /
Receiver2 -pairs:
glass fibre / glass fibre + glass fibre / glass fibre. For SPACOM
SPA-ZC22A0B5M
RS 951 027-HA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 0 pairs plastic fibre.
5 pairs glass fibre. For SPACOM
SPA-ZC22A1B4M
RS 951 027-LA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 1 pair plastic fibre.
4 pairs glass fibre. For SPACOM
SPA-ZC22A2B0M
RS 951 027-FA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter1 / Receiver1 + Transmitter2 /
Receiver2 -pairs:
plastic fibre / plastic fibre + plastic fibre / plastic fibre. For SPACOM
SPA-ZC22A2B3M
RS 951 027-NA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 2 pairs plastic fibre.
3 pairs glass fibre. For SPACOM
SPA-ZC22A3B2M
RS 951 027-RA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 3 pairs plastic fibre.
2 pairs glass fibre. For SPACOM
SPA-ZC22A4B1M
RS 951 027-TA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 4 pairs plastic fibre.
1 pair glass fibre. For SPACOM
SPA-ZC22A5B0M
RS 951 027-VA
Bus connection module 50 Hz, 60 Hz, 80-265 V AC/DC Transmitter / Receiver -pairs: 5 pairs plastic fibre.
0 pairs glass fibre. For SPACOM
SPA-ZC 400CD
SPA-ZC 400CD
Ethernet Adapter Configuration package for SPA-ZC 400 includes: -Communication Engineering Tool
(CET) for SPA-ZC 40x, - Connectivity Packages for REF 541/543/545, and REM 543/545 SPAZC400CD is a FREE WARE when ordered reference number as SPA-ZC 400. S
SPA-ZC 400EL
SPA-ZC 400EL
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol, LC connector for LAN,
SPA-ZC 400 Installation and Commissioning Manual
SPA-ZC 400ELP
SPA-ZC 400ELP
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol and simultaneous dual
port communication, Snap-in connectors for plastic fibre, LC connector for LAN, SPA-ZC 400 Installation
and Commissioning Manual
SPA-ZC 400ELG
SPA-ZC 400ELG
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol and simultaneous dual
port communication, ST connectors for glass fibre, LC connector for LAN, SPA-ZC 400 Installation and
Commissioning Manual
SPA-ZC 400ER
SPA-ZC 400ER
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol, RJ-45 connector for
LAN, SPA-ZC 400 Installation and Commissioning Manual
SPA-ZC 400ERP
SPA-ZC 400ERP
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol and simultaneous dual
port communication, Snap-in connectors for plastic fibre, RJ-45 connector for LAN, SPA-ZC 400
Installation and Commissioning Manual
SPA-ZC 400ERG
SPA-ZC 400ERG
Ethernet Adapter SPA-ZC 400 module with IEC61850 communication protocol and simultaneous dual
port communication, ST connectors for glass fibre, RJ-45 connector for LAN, SPA-ZC 400 Installation
and Commissioning Manual
SPA-ZC 400ML
SPA-ZC 400ML
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol, LC connector for
LAN, SPA-ZC 400 Installation and Commissioning Manual
RER, SPA-ZC
Bus Connection Modules and Protocol Converters
Price
EUR
Item
Order No.
Description
SPA-ZC 400MLP
SPA-ZC 400MLP
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol and simultaneous
dual port communication, Snap-in connectors for plastic fibre, LC connector for LAN, SPA-ZC 400
Installation and Commissioning Manual
SPA-ZC 400MLG
SPA-ZC 400MLG
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol and simultaneous
dual port communication, ST connectors for , LC connector for LANglass fibre, SPA-ZC 400 Installation
and Commissioning Manual
SPA-ZC 400MR
SPA-ZC 400MR
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol, RJ-45 connector
for LAN, SPA-ZC 400 Installation and Commissioning Manual
SPA-ZC 400MRP
SPA-ZC 400MRP
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol and simultaneous
dual port communication, Snap-in connectors for plastic fibre, RJ-45 connector for LAN, SPA-ZC 400
Installation and Commissioning Manual
SPA-ZC 400MRG
SPA-ZC 400MRG
Ethernet Adapter SPA-ZC 400 module with MODBUS/TCP communication protocol and simultaneous
dual port communication, ST connectors for glass fibre, RJ-45 connector for LAN, SPA-ZC 400
Installation and Commissioning Manual
SPA-ZC 400SL
SPA-ZC 400SL
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol, LC connector for LAN,
SPA-ZC 400 Installation and Commissioning Manual
SPA-ZC 400SLP
SPA-ZC 400SLP
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol and simultaneous dual
port communication, Snap-in connectors for plastic fibre, LC connector for LAN, SPA-ZC 400 Installation
and Commissioning Manual
SPA-ZC 400SLG
SPA-ZC 400SLG
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol and simultaneous dual
port communication, ST connectors for glass fibre, LC connector for LAN, SPA-ZC 400 Installation and
Commissioning Manual
SPA-ZC 400SR
SPA-ZC 400SR
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol and simultaneous dual
port communication, Snap-in connectors for plastic fibre, RJ-45 connector for LAN, SPA-ZC 400
Installation and Commissioning Manual
SPA-ZC 400SRP
SPA-ZC 400SRP
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol, RJ-45 connector for
LAN, SPA-ZC 400 Installation and Commissioning Manual
SPA-ZC 400SRG
SPA-ZC 400SRG
Ethernet Adapter SPA-ZC 400 module with SPA/TCP communication protocol and simultaneous dual
port communication, ST connectors for glass fibre, RJ-45 connector for LAN, SPA-ZC 400 Installation
and Commissioning Manual
SPA-ZC 402CD
SPA-ZC 402CD
SPA-ZC 402 Ethernet Adapter Configuration package for SPA-ZC 402 includes: - Communication
Engineering Tool (CET) for SPA-ZC 40x. SPA-ZC402CD is a FREE WARE when ordered WITH the
same reference number as SPA-ZC 402. Separate deliveries will be charged
SPA-ZC 402ELPA
SPA-ZC 402ELPA
Ethernet Adapter SPA-ZC 402 module with IEC61850 communication protocol, Snap-in connectors for
plastic fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commission
SPA-ZC 402ELGA
SPA-ZC 402ELGA
Ethernet Adapter SPA-ZC 402 module with IEC61850 communication protocol, ST connectors for glass
fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC, 110 V 220 V DC, SPA-ZC 402 Installation and Commissioning Man
SPA-ZC 402ERPA
SPA-ZC 402ERPA
Ethernet Adapter SPA-ZC 402 module with IEC61850 communication protocol, Snap-in connectors for
plastic fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commiss
SPA-ZC 402ERGA
SPA-ZC 402ERGA
Ethernet Adapter SPA-ZC 402 module with IEC61850 communication protocol, ST connectors for glass
fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V AC, 110 V
- 220 V DC, SPA-ZC 402 Installation and Commissioning
SPA-ZC 402MLPA
SPA-ZC 402MLPA
Ethernet Adapter SPA-ZC 402 module with MODBUS/TCP communication protocol, Snap-in connectors
for plastic fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commissi
SPA-ZC 402MLGA
SPA-ZC 402MLGA
Ethernet Adapter SPA-ZC 402 module with MODBUS/TCP communication protocol, ST connectors for
glass fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC, 110
V - 220 V DC, SPA-ZC 402 Installation and Commissioning M
SPA-ZC 402MRPA
SPA-ZC 402MRPA
Ethernet Adapter SPA-ZC 402 module with MODBUS/TCP communication protocol, Snap-in connectors
for plastic fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V
AC, 110 V - 220 V DC, SPA-ZC 402 Installation and Commi
SPA-ZC 402MRGA
SPA-ZC 402MRGA
Ethernet Adapter SPA-ZC 402 module with MODBUS/TCP communication protocol, ST connectors for
glass fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commissionin
SPA-ZC 402SLPA
SPA-ZC 402SLPA
Ethernet Adapter SPA-ZC 402 module with SPA/TCP communication protocol, Snap-in connectors for
plastic fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commission
SPA-ZC 402SLGA
SPA-ZC 402SLGA
Ethernet Adapter SPA-ZC 402 module with SPA/TCP communication protocol, ST connectors for glass
fibre to connect SPA-ZC 402 to IED, LC connector for LAN, Auxiliary voltage 100 V - 240 V AC, 110 V 220 V DC, SPA-ZC 402 Installation and Commissioning Man
SPA-ZC 402SRPA
SPA-ZC 402SRPA
Ethernet Adapter SPA-ZC 402 module with SPA/TCP communication protocol, Snap-in connectors for
plastic fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V AC,
110 V - 220 V DC, SPA-ZC 402 Installation and Commiss
SPA-ZC 402SRGA
SPA-ZC 402SRGA
Ethernet Adapter SPA-ZC 402 module with SPA/TCP communication protocol, ST connectors for glass
fibre to connect SPA-ZC 402 to IED, RJ-45 connector for LAN, Auxiliary voltage 100 V - 240 V AC, 110 V
- 220 V DC, SPA-ZC 402 Installation and Commissioning
RER, SPA-ZC
Bus Connection Modules and Protocol Converters
Item
Order No.
Description
Price
EUR
SPA-ZP
Programing and Connection Cables
Description
REF 542plus protection relay
Programming cable (Opto) for HMI V4
Price
EUR
Item
Order No.
1MKC950001-2
1MKC950001-2
1MRS050698
1MRS050698
1MRS120523
1MRS120523
Cables for serial interface connection MICROSCADA --> REC 523, Cable between
MicroSCADA and REC 523, length 15 m
1MRS120525
1MRS120525
Cables for serial interface connection REC523-->MODEM Cable between REC 523
and plug-in modem
1MRS120513-003
1MRS120513-003
Cables for serial interface connection Cable used for rear connector X3.2 with
PROFIBUS
SPA-ZP 10A5
RS 951 109-BA
Cables for serial interface connection SACO 148__ --> modem, length 5 m
SPA-ZP 13A3
RS 951 112-AA
Cables for serial interface connection SACO 148D4, SPA-ZC 22 --> PC, length 5 m
SPA-ZP 14A2
RS 951 113-AA
Cables for serial interface connection Relay --> SPA-ZC17, -ZC22,- ZC23, length 2 m
SPA-ZP 16A2
RS 951 115-AA
SPA-ZP 19A2
RS 951 118-AA
SPA-ZP 1A1
RS 951 100-BA
SPA-ZP 21A
RS 951 119-AA
Cables for serial interface connection SPA-ZC 21-->SACO 16 and 64, length 0,15 m
SPA-ZP 23A10
RS 951 123-BA
Cables for serial interface connection SLTA (SPA-ZC 105) -->SRIO, length 3 m
SPA-ZP 4A10
RS 951 103-DA
SPA-ZP 4A3
RS 951 103-BA
SPA-ZP 4A5
RS 951 103-CA
SPA-ZP 6A2
RS 951 105-AA
Cables for serial interface connection RS-485 interface SPAC rear -->PC, length 2 m
SPA-ZP 8A3
RS 951 107-AA
SPA-ZP 9A1
RS 951 108-AA
Cables for serial interface connection SRIO --> modem, SPA-ZC 4, lenght 1 m
1MRS120517
1MRS120517
SPA-ZF AA 1
RS 951 007-AA
SPA-ZF AA 10
RS 951 007-DA
SPA-ZF AA 2
RS 951 007-GA
SPA-ZF AA 20
RS 951 007-EA
SPA-ZF AA 3
RS 951 007-BA
SPA-ZF AA 30
RS 951 007-FA
SPA-ZF AA 5
RS 951 007-CA
SPA-ZX
Mounting Accessories for SPACOM, SACO and RE_5_ _
Price
EUR
Item
Order No.
Description
B469633
RS 961 049-AA
Mounting accessories for SPACOM-relays and alarm units Brackets for 100 series case
(Spare Part) Note! Brackets are included in the corresponding relay type.
B469634
RS 961 050-AA
Mounting accessories for SPACOM-relays and alarm units Brackets for 300 series case
(Spare Part) Note! Brackets are included in the corresponding relay type.
SPA-ZX 101
RS 961 034-AA
Mounting accessories for SPACOM-relays and alarm units 40 mm Raising frame for 100series (SACO 16D1)
SPA-ZX 102
RS 961 035-AA
Mounting accessories for SPACOM-relays and alarm units 80 mm Raising frame for 100series (SACO 16D1)
SPA-ZX 103
RS 961 045-AA
Mounting accessories for SPACOM-relays and alarm units 120 mm Raising rame for 100series (SACO 16D1)
SPA-ZX 104
RS 961 036-AA
Mounting accessories for SPACOM-relays and alarm units 3*100 19" mounting plate with cutouts for mounting of 100-series cases
SPA-ZX 105
RS 961 037-AA
Mounting accessories for SPACOM-relays and alarm units 2*100 19" mounting plate with cutouts for mounting of 100-series cases
SPA-ZX 106
RS 961 038-AA
Mounting accessories for SPACOM-relays and alarm units 1*100 19" mounting plate with cutouts for mounting of 100-series cases
SPA-ZX 108-AA
RS 961 056-AA
Mounting accessories for SPACOM-relays and alarm units 19" mounting plate for one
SPACOM 100-series relay with RTXP 18 test switch. Relay and test switch fixed and wired.
Realy and test switch to be ordered separately, please see RTXP 18-100.
SPA-ZX 109-AA
RS 961 069-AA
Mounting accessories for SPACOM-relays and alarm units Mounting case for SACO 16D1.
Case is assembled, wired and connected to a relay
SPA-ZX 109-BA
RS 961 069-BA
Mounting accessories for SPACOM-relays and alarm units Mounting case for SACO 16D1.
Case is assembled and wired together (without a relay)
SPA-ZX 109-CA
RS 961 069-CA
Mounting accessories for SPACOM-relays and alarm units Mounting case for SACO 16D1.
Case is assembled, non-wired and non-connected
SPA-ZX 110-AA
RS 961 070-AA
Mounting accessories for SPACOM-relays and alarm units Mounting case for 100-series
(SPAA 120,121, SPAJ 140,141,142.160, SPAU 140, SPAF 140, SPAM 150)
Case is assembled, wired and connected to a relay
SPA-ZX 110-BA
RS 961 070-BA
Mounting accessories for SPACOM-relays and alarm units Mounting case for 100-series
(SPAA 120,121, SPAJ 140,141,142.160, SPAU 140, SPAF 140, SPAM 150)
Case is assembled and wired together (without a relay)
SPA-ZX 110-CA
RS 961 070-CA
Mounting accessories for SPACOM-relays and alarm units Mounting case for 100-series
(SPAA 120,121, SPAJ 140,141,142.160, SPAU 140, SPAF 140, SPAM 150)
Case is non-assembled, non-wired and non-connected
SPA-ZX 111
RS 961 052-AA
Mounting accessories for SPACOM-relays and alarm units 40 mm Raising frame for 100series cases (SPACOM 100 C -series relays)
SPA-ZX 112
RS 961 053-AA
Mounting accessories for SPACOM-relays and alarm units 80 mm Raising frame for 100series cases (SPACOM 100 C -series relays)
SPA-ZX 113
RS 961 072-AA
Mounting accessories for SPACOM-relays and alarm units 120 mm Raising frame for 100series cases (SPACOM 100 C -series relays)
SPA-ZX 19
RS 961 054-AA
Mounting accessories for SPACOM-relays and alarm units 40 mm Raising frame for SACO
SPA-ZX 201
RS 961 039-AA
Mounting accessories for SPACOM-relays and alarm units 1*100 + 1*300 19" mounting plate
with cut-outs for mounting of 100- and 300-series cases
SPXA 100
RS 911 004-AA
1MRS050728
1MRS050728
Mounting kit for semi-flush mounting with raising frame 90 mm. Enclosure size 1/2 together
with 1/4,
1MRS050201
1MRS050201
1MRS050209
1MRS050209
Mounting kit for flush mounting (Spare Part) Note! Mounting kit is included in the
corresponding relay type.
1MRS050239
1MRS050239
Mounting kit for semi-flush mounting with raising frame 90mm. Enclosure size 1/2.
1MRS050240
1MRS050240
1MRS050241
1MRS050241
1MRS050241
1MRS050241
1MRS050243
1MRS050243
1MRS050254
1MRS050254
Mounting kit for semi-flush mounting with raising frame 90mm. Enclosure size 1/3.
1MRS050258
1MRS050258
1MRS050259
1MRS050259
1MRS050682
1MRS050682
Mounting kit for semi-flush mounting with raising frame 120mm. Enclosure size 1/3.
1MRS050736
1MRS050736
SPA-ZX
Mounting Accessories for SPACOM, SACO and RE_5_ _
Price
EUR
Item
Order No.
Description
1MRS050831
1MRS050831
Inclined (25 degrees) raising frame for semi-flush mounting of RE_610 and 615
1MRS060132
1MRS060132
1MRS060196
1MRS060196
1MRS061207
1MRS061207
Mounting bracket for RE_610 relays when mounted together with RTXP 18 Test Switch into a
4U high Combiflex equipment frame. Note: One bracket of type 1MRS061207 and one of
type 1MRS061208 are needed for one RE_610
1MRS061208
1MRS061208
Mounting bracket for RE_610 relays when mounted into 4U high Combiflex equipment frame .
Note: Two (2) bracket is needed for one RE_610
1MRS050694
1MRS050694
1MRS050695
1MRS050695
1MRS050696
1MRS050696
50 mm, Raising frame for for semi-flush mounting of RE_610 and 615
1MRS050697
1MRS050697