=
Buildex: oe:
Product Technical Data Sheet
14-14 Hex Washer Stainless Bi Metal Teks® with 16.0 mm Bonded Washer
Part Number Description Pack Qty Pallet Qty
6-397-0108-8 14-14 x 52.0 Hex Washer Bi Metal Teks (16mm $ Stee! Bonded Washer 500 52,000
6397-01099 14-14 x 70.0 Hex Washer Bi Metal Teks /16 mm § Stes! Bonded Washer 500 «4,000
6-397-0110-1 14-14 x 80.0 Hex Washer Bi Metal Teks /16mm $ Steel Bonded Washer 500 «42,000
6-397-0111-4 14 -14.x 90.0 Hex Washer Bi Metal Teks /16 mm Stee! Bonded Washer 500-——-21,600
Application:
Buildexs 14-14. Hex Washer Stainless Steel Bi Metal Tekss Screw is used for crest and pan fixing Roof Sheets, fixing
Side Cladding to steel or aluminium when protection from a corrosive environments and or a complete system
compatibility is crucial
Drill Capacity:
Steel 1,2 mm ~ 24x2
Features: Bonofits:
Hex Drive For positive drive under high installation torque.
Teks» Point For drilng into steel while ensuring maximum pullout strength and a high stip torque.
Finish Rustpert top coat over Grade 904 (A2) Stainless Stoo! for corrosion resistance and lubricity
Installation Instructions:
1. Use a %e Hex Head Driver Bit (Buildexe Part 1-991-1366-9)
2, Use @ mains powered or cordless scrow driver with a 2,600 RPM speed.
3, Fit the %s driver bit into the screw and place at the fastening position.
4, Apply consistently firm pressure (end load) to the screw driver until the screw has fastened.
Material: Head and Shank: Stainless Stee! Grade 304 | Drill Point: Stainless Stee! 410 or Steel SAE 1022
Hoat Treatment: Not applicable | Finish: Rustpert top coat over Grade 304 (A2) Stainless Stes!
Mechanical Properties:
‘Single Shear Strength (N) 9,400 | Axial Tensile (N) 15,700 | Torsion Strength 15,0 N-m
Pullout Values (N):
‘Steel Purlin G450 1,9: 5,200 | Stool Putin G450 2,4: 7,250
[A values are averages cbisined under laboratary conditions and appropiate salty factors shouldbe applied fer design purposes.
‘These figures are applicable to Buldexo head marked product only,
Corrosion Performance:
Bulldexe 14-14 Hex Washer Stainless Stee! Bi Metal Tekse Screw complies to Australian Standards AS3565.2
[A Dison of TW Buldoxs Australia Pty Ltd ACN 004 235 035 ABN 3 004 255 063, Page 1 of 2
www buildex.comauBuildex ca
Product Technical Data Sheet
14-14 Hex Washer Stainless Bi Metal Teks® with 16.0 mm Bonded Washer
61
Length
Max. te
Effective
Thread
Grip
Length
O18 he Hex ia
Max Drive
fe Tks Point
B16 AL Bonded ats
Wesher ined
Description Length Grip Length _|_ Effective Length
14-14% 52.0 Hex Washer Bi Metal Teks with ‘BW | 513/530 | 16.25 Max. 38.0 Min
14-14% 70.0 Hex Washer Bi Metal Teks with ABW | 695/710 | 26.25 Max. 58.0 Min
14-14 x 80.0 Hex Washer Bi Metal Teks with alsw | 795/810 | 34.5 Max 65.0 Min
14-14% 90.0 Hex Washer Bi Metal Teke with AIBW | 99.5/91.0 | 44.5 Max 76.0 Min
[At dimensions nomina! unless otherwise slated Normal menufecurng tolerances appv.
Dr David Collinson
Technical & Product Development
Manager Buildex
Bulktox®9 Hood Orfco
‘0 South Road
Moorabbin Vitoria 2189
useaila
4300368 101
CustomerServce-MBN@buldex com.au
‘Alan Brooke Buildox® Middle Eastom Sales OMfee
Quality Assurance ‘middlosestaalos@buldex.com.eu
Manager Buildex
“Toctnical Help Desk
‘Techricelnelpdesk@ouldex.com au
‘Status Released | Witton By John Malis | Dete Weten 6022011 | Curent Issue 2 | Curent Issue Date 6672011
[A Diveion of TW Buldoxs Auctrala Ply ACN 004 295 096 ABN 63 00# 285 063, Pago 2 of 2
stp www buildex.com.aus