Professional Documents
Culture Documents
Feller Bunch Ers
Feller Bunch Ers
Feller Bunchers
FELLER BUNCHERS
Wheeled
Barko 685
Barko 785B
Barko 885B
Bell Ultra C Disc
Bell Ultra C
CAT 533
CAT 543
Franklin C3600
Franklin C4500 S2
Franklin C4800 / C5000
Franklin C5500
Hydro Ax
John Deere 643H/843H
Tigercat 718
Tigercat 720D
Tigercat 724D
Tigercat 726B
Timberjack 740
Timberjack 840
Timberking TK340, TK350, TK360
Timberking TK370, TK380
TimberPro TB620-E
TimbePpro TB 820 E Series
TimberPro TB 820 E Series Leveling
Tracked
Allied ATH 28
John Deere 653G
John Deere 753G, 753GL
John Deere 853G, 953G
Madill 2200, 3200B
Prentice 320 / 720
Prentice 630A / 730A
I N D E X
Tracked
(continued)
FELLER BUNCHERS
Tanguay FB760
Tigercat 822
Tigercat 860
Tigercat 870
Timbco T415-D
Timbco T416-D
Timbco T425-D
Timbco T445-D
Timbco T450-D Severe-Duty
Timberjack 608S
Timberjack 850
Timberjack 850/950
Timberking TK711, TK721, TK722, TK732
Timberking TK1051
Timberking TK1161, TK1162
Trans Gesco TG475
W H EELS
Pressure
D isplacem ent
H ydrostatic
R exroth AA4VG 56
Variable displacem ent,tandem axial
piston pum p w ith pressure overide
Servo via footpedals
37 000 kPa (5 366 psi)
56 cm (3.4 in3 )
Pressure
D isplacem ent
Volvo F12-40
Fixed displacem entbentaxis piston
m otor
37 000 kPa (5 366 psi)
40 cm (2.44 in3 )
PU M P
Type
C ontrol
R ating:
M O TO R S
Type
R ating:
W H EELD R IVER S
C onfiguration
Travelspeed w ith
standard tyres
STAN D AR D
O PTIO N AL
Bell# 45V
Bell# 38V
D ouble planetary reduction in series
w ith Bellplanetary reduction
7.46 km /h
9.08 km /h
(4.6 m ph)
(5.6 m ph)
FR O N T
Tyre :
Size
Type
R EAR
Tyre :
Size
Type
G round pressure (unladen)
Front
R ear
28L x 26
Forestry Special
21.5L x 16.1 14 Ply
H igh Flotation
52.5 kPa (7.6 psi)
41.4 kPa (6.0 psi)
H YD R A U LIC SYSTEM
Application
Flow :
Pressure :
Valve
Auxilliary pum p
Application
Flow :
Pressure :
FELLIN G H EA D
Saw H ead
Saw D isc
W eight
Koehring 18"
16 C arbide tipped replaceable teeth,
single fastenerdesign.
1 350 rpm blade speed
1 750 kg (3 858 lbs)
O PTIO N A L EQ U IPM EN T
Airconditioning
D ieselcold startaid
D oorw indow s
23.1 x 26 tyres
PU M PS
Type
B R A K ES
SER VIC E BR AKE
M axim um brake force
H ydrostatic brake
73.3 kN (16 480 lbf)
60.2 kN (13 530 lbf)
PAR K & EM ER G EN C Y
BR AKE
M axim um brake force
Spring applied,hydraulic w et
m ultidisc brake
117.8 kN (26 482 lbf)
96.8 kN (21 761 lbf)
ELEC TR IC A L SYSTEM
Voltage
Battery C apacity
Starterm otorrating
Alternatorrating
12 V
100Ah
3.0 kW (4.0 hp)
12V 63A
Alldim ensions are show n in m illim etres,unless otherw ise stated betw een brackets. U nderourpolicy ofcontinuous im provem ent,w e reserve the rightto change specifications
and design w ithoutpriornotice. Photographs featured in this brochure m ay include optionalequipm ent.
U LTR A C FELLER BU N C H ER
EN G IN E
W H EELS
Pressure
D isplacem ent
H ydrostatic
R exroth AA4VG 56
Variable displacem ent,tandem axial
piston pum p w ith pressure overide
Servo via footpedals
37 000 kPa (5 366 psi)
56 cm (3.4 in3 )
Pressure
D isplacem ent
Volvo F12-40
Fixed displacem entbentaxis piston
m otor
37 000 kPa (5 366 psi)
40 cm (2.44 in3 )
PU M P
Type
C ontrol
R ating:
M O TO R S
Type
R ating:
W H EELD R IVER S
C onfiguration
Travelspeed w ith
standard tyres
STAN D AR D
O PTIO N AL
Bell# 45V
Bell# 38V
D ouble planetary reduction in series
w ith Bellplanetary reduction
7.12 km /h
8.67 km /h
(4.4 m ph)
(5.4 m ph)
B R A K ES
SER VIC E BR AKE
M axim um brake force
H ydrostatic brake
73.3 kN (16 480 lbf)
60.2 kN (13 530 lbf)
PAR K & EM ER G EN C Y
BR AKE
M axim um brake force
Spring applied,hydraulic w et
m ultidisc brake
117.8 kN (26 482 lbf)
96.8 kN (21 761 lbf)
ELEC TR IC A L SYSTEM
Voltage
Battery C apacity
Starterm otorrating
Alternatorrating
12 V
100Ah
3.0 kW (4.0 hp)
12V 63A
FR O N T
Tyre :
Size
Type
R EAR
Tyre :
Size
Type
G round pressure (unladen)
Front
R ear
28L x 26
Forestry Special
21.5L x 16.1 14 Ply
H igh Flotation
40.6 kPa (5.9 psi)
71.9 kPa (10.4 psi)
H YD R A U LIC SYSTEM
Application
Flow :
Pressure :
Valve
FELLIN G H EA D
Bell30" BarSaw
610 m m (24")
760 m m (30")
600 m (23")
18 500 kPa (2 683 psi)
20 000 kPa (2 900 psi)
142 l /m in (36.5 U S gpm )
19 cm 3 (1.2 in3)
0.404"
0.063"
1 400 m m (55")
1 111 m m (43")
1 355 m m (53")
554 kg (1 220 lbs)
R O TATO R
O peration
W eight
Bell
C ontinuous
80 kg (117 lbs)
O PTIO N A L EQ U IPM EN T
Airconditioning
D ieselcold startaid
D oorw indow s
23.1 x 26 tyres
PU M PS
Type
Alldim ensions are show n in m illim etres,unless otherw ise stated betw een brackets. U nderourpolicy ofcontinuous im provem ent,w e reserve the rightto change specifications
and design w ithoutpriornotice. Photographs featured in this brochure m ay include optionalequipm ent.
Timberjack
740
Feller Buncher
Technical Data
Engine
Electrical System
John Deere
6068T with altitudecompensating turbocharger
Maximum power
127 kW (170 hp)
Governed rpm
2 000 rpm
Cylinders
6
Displacement
6,8L (414 cu. in.)
Maximum torque 670 Nm (494 lb. ft.)
@ 1 400 rpm
Fuel consumption
19,3 - 24,6 L/h
(5.1-6.5 usg/hr.)
Fuel filters
2, with water separation
Air cleaner
Dual stage with safety
element and dust unloader valve
Cooling system
Heavy duty radiator
with coolant level indicator and coolant
recovery reservoir
Cooling fan
Blower
Lubrication
Pressure system with oil
cooler (oil to water)
Oil filter Vertically mounted spin-on oil
Alternator
Batteries
Transmission
Infinitely variable hydrostatic with
two-speed gearbox
Travel speeds (Standard 28L-26 tires)
Gear 1, 0-8km/h (0-5mph),
forward and reverse.
Gear 2, 0-20km/h (0-12.5mph),
forward and reverse.
12 volt, 95 amps
2 x 12 volt, 925 CCA,
185 ah each
Axles
Final drives - heavy duty planetary,
mounted inboard
Differentials - hydraulic lock, operated
on-the-go front and rear - standard
Rear axle oscillation - 30 degrees,
stop to stop
Service Brakes
Inboard-mounted hydraulic wet-disc
bathed in cooling oil, long life, self
adjusting, self equalizing, front axle
Parking Brake
Automatically spring applied,
hydraulically released, driveline
mounted, completely enclosed in oil
Steering
Frame articulation - 90 degrees total
articulation, stop to stop
Steering wheel, Orbitral valve - std.
Wheel lever steering, optional
740
Feller Buncher
A
B
C
D
E
= 2 451 mm (96.5)
= 743 mm (29.3)
=
24
=
60
= 2 096 mm (82.5)
F
G
H
I
J
=
=
=
=
=
1
2
7
3
194 mm (47)
642 mm (104)
290 mm (287)
251 mm (128)
508 mm (20)
K = 993 mm (39.1)
L = 742 mm (29.2)
M = 2 078 mm (81.8)
Overall width =
2 900 mm (114)
Hydraulic System
Ground Pressure
Main pumps
Saw machine - one variable-displacement axial piston main
pump, closed-center system with priority for steering; one
variable-displacement axial piston pump for continuous saw
Shear machine -two fixed-displacement gear pumps for shear;
open center system; axial piston pilot/brake pump
Ground drive - variable displacement axial piston pump and
motor
Shear close flow
333L/min. (88 usgpm) @ 2,200 rpm
Shear open flow
166L/min. (44 usgpm) @ 2,200 rpm
Shear pressure (close) 24 131 kPa (3,500 psi)
Lift and tilt flow (shear) 166L/min (44 usgpm) @ 2,200 rpm
Pressure
21 374 kPA (3,100 psi)
Continuous disc saw
Flow (optional)
113L/min. (30 usgpm) @ 2,350 rpm
Pressure
25 856 kPa (3,750 psi)
Filter - vertically mounted 10-micron spin-on return oil with
bypass
Cylinders
Lift arm (2)
Bore - 100 mm (3.92 in.)
Rod Diameter - 56 mm (2.24 in.)
Head Tilt (2)
Bore - 100 mm (3.92 in.)
Rod Diameter - 56 mm (2.24 in.)
59 kPa (8.6 psi), 28L-26 LS2 12 Ply tires, both shear or sawequipped unit. Tires inflated to manufacturers recommended
pressures and 76 mm (3 in.) ground penetration
Tires
Capacities
Fuel tank
284
Cooling system
24.6
Engine lubrication, including filter
19
Hydraulic reservoir
254
Two-speed gearbox
4.9
Pump drive gearbox
4.7
Axles (front and rear), each (1200 Series) 19
Axle (front - 1400 Series)
23.4
L
L
L
L
L
L
L
L
(75 US gal.)
(26 US qt.)
(20 US qt.)
(67 US gal.)
(5.2 US qt.)
(5 US qt.)
(20 US qt.)
(30 US qt.)
Operating Weights
Standard equipment, less felling head
With Timberjack FB20 Shear
740
Feller Buncher
Electrical
Battery disconnect in operators station
Dual, heavy duty, low-maintenance batteries
Transmission
Axles
Front and rear axle differential lock,
hydraulically operated, on-the-go
Standard-duty front axle, John Deere 1200 Series
Heavy-duty front axle, John Deere 1400 Series
Rear axle, John Deere 1200 Series
Brakes
Service: Disc type, mounted inboard of
axle final drives, front axle / Sealed and
lubricated / Self adjusting and self equalizing
Park: Spring-applied, hydraulically released, driveline
mounted, completely enclosed in oil
Steering
Frame articulation, with 90 degrees total
articulation, rubber frame stops
Wheel steering, telescopic and tilt column,
steering wheel spinner knob
Lever steering, left-hand armrest-mounted
control
Operators Cab
Air conditioner (R134A refrigerant)
AM-FM stereo radio with two (2) remote-mounted
speakers
CB radio
Cab tilt with inboard hydraulics
Cab with integral forestry guarding, FOPS,
OPS, and ROPS protective structure
Coat hook
Cup holder
Defroster fan (right front of cab)
Fire extinguishers, dry chemical and
pressurized water
Floor mat
Full-function monitor instrumentation with
audible warning for: Engine coolant temperature /
Engine oil pressure
Monitor indicator lights for: Engine air filter
restriction / Hydraulics filter restriction / Hydrostatic
filter restriction / Low alternator voltage / Low
engine coolant level / Park brake
Gauges, illuminated: Engine coolant temperature /
Hydrostatic transmission oil temperature
Hand throttle
Headliner
Heater, 40,000 Btu
Horn
Hourmeter, illuminated
Interior light
Lockable cab door (with start switch key)
Lunch cooler storage area
Pressurizer, dual zone, three speed with fresh
air inlet
Rearview mirror, interior mounted
Seat, fabric covered, air suspension, knee action
with: Lumbar adjustment / Height and weight
adjustment / Seat armrest height adjustment
High back with headrest / Seat backrest
angle adjustment
Seat belt, 51 mm (2) wide with retractor
(conforms to SAE J386)
Secondary exit (right side window)
Large treetop window
Sliding side windows (2)
Tinted polycarbonate windows
Storage in left-hand door
Windshield wiper/washer
Standard
Optional
Timberjack and the donkey symbol are trade marks of Timberjack. Printed in Canada by BP-2.5M-08/01
Hydraulic System
Hydraulic reservoir shutoff valve with pump
protection device
Low-effort pilot controls
Oil cooler, heavy duty in-line core, side by side
with radiator
Oil filter, return, 10 micron with bypass
Open-center hydraulics for shear machine
Pressure-compensating load sense hydraulics
for saw machine
Quick disconnect diagnostic ports
Adaptable to: Shear
Continuous disc saws with axial piston pump
Overall Vehicle
Articulation transport lock pin
Cable-type cab guards
Hand grips
Hose shields on lift and tilt cylinders
Lift arm lock
Lockable heavy-duty engine side shields
Lockable hinged access doors over fuel and
hydraulic fill caps
Pressurized water reservoir with pressure gauge,
hose, and spray nozzle
Tow hook
Standard
The manufacturer reserves the right to make changes or add improvements at any time without
incurring any obligation to make such changes on machines manufactured previously.
www.timberjack.com
Optional
Page 1 of 1
The 2200
The 3200B
2200
z
z
z
z
z
z
z
z
z
z
z
z
z
3200B
z
z
z
z
z
z
z
z
z
Return to Main
Yarders
Log Loaders
Email: info@madillequipment.com
htt //
dill
/b
ht l
8/29/2002
FELLER BUNCHER
FB760
Summary of features
- Lift capacity of 40,000 lbs. / 18,140 kg
- Reach to 32 ft. / 9.7 m
- Full lift capacity over 360
- 28 in. (71 cm) underbody clearance
- D7 size "TANGUAY" purpose-built track roller frames
- Large 285 gallon (1080 l) fuel tank for extended shifts
- Forestry designed booms and sticks
- Cab engineered for operator's safety and comfort
FELLER BUNCHER
FB760
Engine
Travel speeds:
Cummins 6CTA-8,3L
Turbo 4 stroke-cycle diesel engine with six cylinders.
Cold weather ether starting aid. Engine coolant heater,
120 V. Two stage air filter and Racor fuel filter.
Variable Displacement
Hydraulic System
One double piston pump, one single piston pump and
one single gear pump.
Total flow of 172 gpm (650 l/min).
Operating pressures:
Lights
Eight working lights located for optimum illumination.
Two on stick boom, three on the cab, one on rear
structure and one on each side of the machine.
Cab
42 in. X 60 in. (1 067 mm X 1 524 mm) left side
mounted, human engineered cab for safety
and comfort of the operator, designed to meet
WCB, F.O.P.S./R.O.P.S./O.P.S. requirements. Cab
is equipped with air conditioning, pressurizer,
heater, AM-FM cassette player with 24V/12V
convertor, 1/2 in. (1.27mm) Lexan safety glass,
side windows, right side window used as an
emergency escape, removable roof panel also
sed as emergency exit. Fully adjustable and
comfortable seat with armrests.
Complete instrument panel with engine oil
pressure gauge, engine coolant temperature
gauge, electric fuel gauge, hydraulic oil temperature
gauge, voltmeter and tachometer. Engine low
oil/high temp and/or low hydraulic oil level
alarm and warning lights. Electric tree counter.
Electrical System
Two 12 V batteries.
Drive
Fully hydrostatic system via two-speed auto-shift
variable displacement piston motors. Three-stage
planetary final drives. Oil disc brakes on final drive
input shaft, spring applied / hydraulic released.
When machine is stationary, brakes are set
automatically. Depressing either travel pedal
disengages brakes.
Full length track guards / shoe support. 28 in. (710 mm)
single grouser pads with mud and snow relief holes.
Controls
Swing
Refill Capacities
Swing lock:
Electro-hydraulic parking brake mounted on
planetary gearbox and activated by rocker switch on
operators console.
Shipping Weight
Shipping weight including all lubricants and 10%
fuel without felling head:
65,648 lbs. (29,778 kg)
Optional Equipment
Choice of processing heads from different
manufacturers
Fire protection system
Cummins QSC electronic engine
Auto lub system
Parallelogram boom kit for dangling heads
24
7.32
22
6.71
20
6.10
18
5.49
16
4.88
14
4.27
12
3.66
10
3.05
2.44
1.83
1.22
0.61
0.00
0.61
1.22
1.83
2.44
10
3.05
12
3.66
MIN
.
30 DIS
0 F TA
EE NC
T E
8
2.44
6
1.83
4
1.22
2
0.61
0
0.00
2
0.61
4
1.22
6
1.83
8
2.44
10
3.05
12
3.66
14
4.27
16
4.88
18
5.49
20
6.10
22
6.71
24
7.32
26
7.92
28
8.53
30
9.14
14 4.27
32 34 FEET
9.75 10.36 METERS
(ft.)
10
15
20
25
(m)
3.00
4.57
6.10
7.62
Capacity * (lb.)
37,700
24,500
18,300
14,200
(kg)
17,100
11,113
8,300
6,640
21'-7" Max.
10'-11"
28"
7'-9"
32'
28"
11'-5"
Tanguay is a registered trademark of Tanguay Industries / A Division of The Canam Manac Group Inc.
Specifications are subject to change without notice or obligation.
tanguay
A division of The Canam Manac Group Inc.
7'-9"
9'-5"
10
3.05
T415-D
Non-Leveling, 360 Continuous Swing
106
(3,20 m)
1311 (4,24 m)
76 (2,29 m)
215 (6,53 m)
109 (3,28 m)
133 (4,04 m)
Lift Capacities
Radius
25
(64 cm)
41
(104 cm)
72 (2,18 m)
92 (2,79 m)
(wo/attachment)
w/optional counterweight
10 (3,05 m) .. 23,125 lb. (10 489 kg).............. 23,875 lb. (10 830 kg)
15 (4,57 m) .... 12,150 lb. (5 511 kg)................ 13,340 lb. (6 051 kg)
20 (6,10 m) ...... 7,625 lb. (3 459 kg).................. 8,450 lb. (3 833 kg)
T415-D
Non-Leveling, 360 Continuous Swing
Standard Equipment
Optional Equipment
Cummins B5.9-C 200 HP (149 kW) engine with 130 Amp alternator.
Linde HPR 160cc 90 gpm (341 litres), horsepower compensated
system pump and Linde 8-section VW18/25 main control valve.
Machine Weights
(w/o attachment)
w/optional counterweight
24/600 mm SG .......................... 41,175 lb. (18 677 kg) ...... 43,275 lb. (19 629 kg)
24/600 mm DG (Standard)........ 41,080 lb. (18 634 kg) ...... 43,180 lb. (19 586 kg)
28/700 mm DG .......................... 41,735 lb. (18 931 kg) ...... 43,835 lb. (19 883 kg)
36/900 mm TG .......................... 42,135 lb. (19 112 kg) ...... 44,235 lb. (20 065 kg)
Ground Pressures
(w/o attachment)
T416-D
Non-Leveling, 360 Continuous Swing
107
(3,23 m)
1311 (4,24 m)
76 (2,29 m)
215 (6,53 m)
115 (3,48 m)
144 (4,37 m)
25
(64 cm)
41
(104 cm)
72 (2,18 m)
92 (2,79 m)
w/optional counterweight
10 (3,05 m) .. 23,350 lb. (10 592 kg) .............. 24,100 lb. (10 932 kg)
15 (4,57 m) .... 13,360 lb. (6 060 kg) ................ 14,550 lb. (6 600 kg)
20 (6,10 m) ........ 8,400 lb. (3 810kg) .................. 9,225 lb. (4 184 kg)
*Lift capacities shown are calculated. Actual testing was not completed at the time
this information was printed.
T416-D
Non-Leveling, 360 Continuous Swing
Standard Equipment
Optional Equipment
Cummins C8.3-C 215 HP (160 kW) Elite engine with 130 Amp
alternator.
2,100 lb. (953 kg) counterweight for cutting attachments weighing over
5,000 lb. (2 268 kg).
Set back center of rotation for better snow and soft ground mobility.
Ground Pressures
(wo/attachment)
T425-D
4-Way Cab Leveling
122
(3,71 m)
1311 (4,24 m)
76 (2,29 m)
215 (6,53 m)
115 (3,48 m)
144 (4,37 m)
Lift Capacities
Radius
27
(69 cm)
46
(117 cm)
78 (2,34 m)
98 (2,95 m)
(wo/attachment)
Lift Capacity
T425-D
T425-C
4-Way Cab Leveling
Standard Equipment
Caterpillar 325 (D6) undercarriage, 24/600 mm SG track shoes,
Lohmann GFT60 final drives, Rexroth A6VE80 2-speed drive motors
with 53,305 lb. (24 179 kg) drawbar pull and 0-3.5 mph (0-5,6 km/h)
travel speed.
Cummins C8.3-C 215 HP (160 kW) Elite engine with 130 Amp
alternator.
Optional Equipment
28/700 mm DG and 36/900 mm TG track shoes.
John Deere T6068TF150 170 HP (127 kW), John Deere T6068TF250 185 HP
(138 kW), Caterpillar 3126T 240 HP (179 kW), or Cummins C8.3-C 260 HP
(193 kW) Elite engine.
Fire Suppression system.
Combined flow hydraulics for 105 gpm (397 litres) flow to cutting attachment.
Machine Weights
(wo/attachment)
Ground Pressures
(wo/attachment)
T445-D
T445-C
4-Way Cab Leveling
125
(3,78 m)
1311 (4,24 m)
76 (2,29 m)
215 (6,53 m)
1110 (3,61 m)
154 (4,67 m)
30
(76 cm)
50
(127 cm)
Lift Capacities
Radius
(wo/attachment)
Lift Capacity
T445-D
T445-C
4-Way Cab Leveling
Standard Equipment
Caterpillar 330 (D7) undercarriage, 24/600 mm SG track shoes,
Lohmann GFT80 final drives, Rexroth A6VE80 2-speed drive motors
with 74,745 lb. (33 904 kg) drawbar pull and 0-3.3 mph (0-5,3 km/h)
travel speed.
Cummins C8.3-C 260HP (193 kW) Elite engine with 130 Amp
alternator.
Rexroth 130cc 75 gpm (284 litres) implement pump and Rexroth
9-section MP18/22 main control valve. Optional disc saw circuit uses
a Rexroth 45cc 28 gpm (106 litres) piggy-back mounted to the
implement pump.
Dual hydrostatic track drives with Rexroth AA4VG90 55 gpm
(208 litres) pumps.
Optional Equipment
28/700 mm SG, 28/700 mm DG and 36/900 mm TG track shoes.
Caterpillar 3126T 240 HP (179 kW) engine.
Fire Suppression system.
Hydraulics for disc saw installation.
Up to 4 additional auxiliary implement functions.
1-1/4 Supply lines to cutting attachment.
Combined flow hydraulics for 105 gpm (397 litres) flow to
cutting attachment.
Automatic track brakes.
Set back center of rotation for better snow and soft ground mobility.
1-1/4 front window for added protection when using high lateral tilting
disc saws.
Extended machine warranty.
Machine Weights
(wo/attachment)
Ground Pressures
(wo/attachment)
T450-D
T455-D Severe-Duty
4-Way Cab Leveling
126
(3,81 m)
1311 (4,24 m)
76 (2,29 m)
215 (6,53 m)
1111 (3,63 m)
154 (4,67 m)
31
(79 cm)
51
(130 cm)
Lift Capacities
Radius
84 (2,54 m)
104 (3,15 m)
(wo/attachment)
Lift Capacity
T450-D
T455-D Severe Duty
4-Way Cab Leveling
Standard Equipment
Quadco D6D undercarriage, 28/700 mm SG track shoes, O&K F062
final drives, Rexroth A6VE80 2-speed drive motors with 77,580 lb.
(35 190 kg) drawbar pull and 0-3.2 mph (0-5,1 km/h) travel speed.
Cummins C8.3-C 260 HP (193 kW) Elite engine with 130 Amp alternator.
Rexroth 130cc 75 gpm (284 litres) implement pump and Rexroth
9-section MP18/22 main control valve. Optional disc saw circuit uses a
Rexroth 45cc 28 gpm (106 litres) piggy-back mounted to the
implement pump.
Optional Equipment
24/600 mm SG, 30/750 mm DG and 36/900 mm TG track shoes.
Caterpillar 3126T 240 HP (179 kW) engine.
Fire Suppression system.
Hydraulics for disc saw installation.
Up to 4 additional auxiliary implement functions.
1-1/4 Supply lines to cutting attachment.
Combined flow hydraulics for 105 gpm (397 litres) flow to cutting attachment.
Machine Weights
(wo/attachment)
Ground Pressures
(wo/attachment)
Timberjack
608S
608S
Boom Performance
608S
with std. S547 high accumulation felling
head, weighing 5,510 lbs. (2 499 kg)
Maximum
Cut Radius
Lift
Capacity
*Minimum
Cut Radius
25' 8"
(7.80 m)
2,900 lbs.
(1 315 kg)
15' 3"
(4.65 m)
Hoist Cylinder: 6.0" (152 mm) bore, 3.5" (89 mm) rod, 44.5" (1 130 mm) stroke
Tilt & Stick Cylinders: (2) identical (cushion type) 5.0" (127 mm) bore, 3.0" (76 mm) rod, 40.5" (1 029 mm) stroke
* Measured with 6 tilt on felling head.
Power
Standard engine
horsepower
Optional engine
horsepower
Hydraulic System
Designed for Timberjack high-speed disc saw heads.
Dedicated pumps for the carrier, attachment clamp arms and
wrist, and saw blade functions. With Speed Sense hydraulic
pump control for maximum machine performance.
Reservoir capacity 52 gal. U.S. (197 L), completely sealed and
pressurized, with a hand pump filler. Return oil 100% filtered
through two 5 micron filters with a 22 psi (152 kPa) bypass.
608S
Vehicle Dimensions
*Weight
52,200 lbs. (23 680 kg)
Height to top of cab
130" (330 cm)
A. Width over 24" tracks
124" (315 cm)
B. Length, less booms
174" (442 cm)
C. Tail swing over side (24" (61 cm) tracks)
10" (25 cm)
(*Approximate operating weight includes S547 high accumulation felling head at 5,510 lbs. (2 499 kg), all standard equipment,
1/2 full fuel tank at 525 lbs. (238 kg), all fluids and a 165 lb. (75 kg) operator.)
Track System
Undercarriage Weldment:
Fully enclosed unitized weldment using
high strength, wear resistant steels.
Track side frames are designed with
integral track guarding and have ramp
angles at both ends. Service access
covers are provided for roller removal.
Front Idler:
Sealed, heavy duty, bronze alloy
bushings in oil bath. Spring shock
absorber and hydraulic track
tension adjuster.
Track Drives:
Triple reduction planetary type track
drive gearboxes with bi-directional
variable displacement piston motors.
Drive motors include counterbalance
valves to protect motors in overrunning conditions.
Upper Track Slides:
Wear resistant, replaceable slides
are standard.
Tractive Effort:
53,550 lbf (238 kN)
Ground Clearance
Track Shoes
Standard:
Optional:
Optional:
Optional:
Optional:
Ground Pressure
Ground Clearance
7.3 psi
(50 kPa)
7.3 psi
(50 kPa)
6.4 psi
(44 kPa)
6.0 psi
(41 kPa)
5.1 psi
(35 kPa)
27''
(70 cm)
29''
(70 cm)
29''
(74 cm)
27''
(70 cm)
27''
(69 cm)
Operators Cab
Spacious and strong, with integral
protective structure. Green tinted Lexan
Margard windows reduce need for cage
type guarding. Integral skylight
provides excellent upward visibility.
Large opening rear window doubles as
a second exit route. Reverse slope
windshield reduces glare and debris
accumulation. Fully adjustable high
back suspension seat. Ergonomically
designed hydraulic joy sticks with soft
touch function buttons. Complete with
storage areas behind the seat and on the
door, dome light, coat hook and ash tray.
Timberjack-installed cab complies
with: SAE J1040 ROPS, SAE J231
FOPS and J1084 OPS.
Climate Control
Unitized high output heater and air
conditioner with air filter on the inlet.
Sliding rear window with an insect
screen for enhanced air exchange.
Full insulation to stabilize cab
temperature and further reduce
interior cab noise level.
Timberjack and the donkey symbol are trade marks of Timberjack. Printed in Canada by BP-10M-10/99
Instrumentation
Gauges:
Engine coolant temperature, Engine oil
pressure, Hydraulic oil temperature,
Voltage, Fuel level, Hourmeter,
Tachometer.
Warning lights:
Low hydraulic oil level, High return
filter pressure, Low pump inlet
pressure, and Low engine coolant level.
Horn system sounds warning for:
Loss of engine oil pressure, High
engine coolant temperature, High
hydraulic oil temperature.
Electrical System
Alternator
Batteries (2)
24 volt, 70 amp
950 CCA,
185 minutes RC,
each
Felling Heads
High Speed Disc Saw Felling Heads with
multiple tree capability and 15 degree wrist.
Standard
S547
Optional
S566
High
accumulation
22" center
pocket
22"
(56 cm)
22"
(56 cm)
Accumulation
capacity
*Weight
5,510 lbs.
(2 499 kg)
6,480 lbs.
(2 939 kg)
Model
Description
Cutting
capacity
Standard Equipment
10 lb. Fire extinguisher, Operator and Parts
manuals.
24" (61 cm) and 30" (76 cm) track shoes are
provided with mud/snow relief holes.
Optional Equipment
230 hp Cummins 6CTA engine
Fire suppression system.
Hydraulic tank heater.
Top rollers in lieu of bolt-on track slides, two
per side (mandatory with 36" shoes).
24 volt to 12 volt converter.
2,000 lb. (907 kg) counterweight.
Timberjack Warranty
The Timberjack 608S Feller Buncher, including
either the Timberjack S547 or the S566 Felling
Head, comes with a one year or 2,000 hour
warranty* and is completely engineered and
assembled by Timberjack.
* Consult warranty documentation for details.
The manufacturer reserves the right to make changes or add improvements at any time without
incurring any obligation to make such changes on machines manufactured previously.
Some items shown are optional equipment.
www.timberjack.com
Timberjack
850
Feller Buncher
Technical Data
Engine
Cummins
6CTA8.3 turbo, 6 cylinder
Horsepower 171kW (230hp)@2000rpm
Displacement
8.3L (504 cu.in.)
Fuel Tank Capacity 1117L (295 U.S. gal.)
Cooling System
Capacity
52L (13.7 U.S. gal.)
Oversized radiator
Swing out pre-debris screen
Swing out A/C condenser
Swing out hydraulic oil cooler
Direct drive cooling fan via torsional
damper
Air Intake
Two stage aspirated air cleaner. Choice
of warm/cool intakes for optimal
performance and fuel efficiency.
Hydraulic System
Load sense, pressure compensated
main valve with proportional flow
anti-saturation control. Provides
matched hydraulic performance to
850
Feller Buncher
Boom/Head Configurations
Standard boom with FS22 Felling Head
A Minimum cut radius
Lift Capacity 7698
B Maximum cut radius
Lift Capacity 2767
Cutting swath
4 800 mm (15'10")
kg (16 970 lbs.)
8 200 mm (26'11")
kg (6 100 lbs.)
3 400 mm (11'1")
4 800 mm (15'10")
kg (17 575 lbs.)
8 200 mm (26'11")
kg (6 715 lbs.)
3 400 mm (11'1")
5 000 mm (16'6")
kg (16 970 lbs.)
9 750 mm (32')
kg (3 300 lbs.)
4 750 mm (15'6")
850
Feller Buncher
Vehicle Dimensions
A Width over 610 mm (24") tracks
3 150 mm (124")
B Track length
4 420 mm (174")
C Tail swing over side
3 000 mm (120")
Height to top of cab (sky light removed) 3 500 mm (138")
Weight
29 166 kg (64,300 lbs.)
Based on standard machine configuration, 1/2 full fuel
tank at 420 kg (925 lbs.), fluids, 75 kg (165 lb.) operator
with 3 257 kg (7,180 lbs.) FS22 Felling head.
Service Access
Walk through service access eases cleaning and servicing. All routine service points are accessible via lockable swingout doors that can be accessed without opening the enclosure top. The enclosure is hydraulically opened and doubles as
a sturdy work area. The hydraulic enclosure pump is battery powered, with a back-up hand pump. The enclosure top is
mechanically secured when closed. Enclosure is operated from inside the cab.
Swing Drive
360 continuous rotation using two bi-directional piston swing motors with double reduction planetary gearboxes.
Spring applied and manually released brakes are incorporated in each gearbox.
Swing speed: 6.9 rpm.
Swing Torque: 500 Nm (52000 ft.lbs.)
Track System
Fully enclosed, unitized undercarriage
weldment using high strength, wear
resistant steels. Track side frames have
integral track guarding for strength.
Ramp approach angles at both ends
for superior travel over rough terrain
and reduced ground impact. Track
drive motor housings are inside 24"
tracks. Service access covers are
provided for roller removal.
Front Idler - sealed, heavy duty,
bronze alloy bearings in oil bath.
Spring shock absorber and hydraulic
track tension adjuster.
Track Drives - triple reduction
planetary type track drive gearboxes
with bi-directional variable
displacement piston motors. Drive
motors include counterbalance valves
to protect motors in overrunning
conditions.
Optional:
Optional:
Optional:
Optional:
Ground Pressure
Ground Clearance
62 kPa
9.0 psi
62 kPa
9.0 psi
54 kPa
7.8 psi
50 kPa
7.3 psi
43 kPa
6.2 psi
700 mm
27''
740 mm
29''
740 mm
29''
700 mm
27''
690 mm
27''
850
Feller Buncher
Operator's Cab
Instrumentation
Climate Control
Electrical System
Alternator
Batteries (2)
24 volt, 70 amp
4D - 1000 CCA @
-18C (0F)
Converter
300 RC 24V-12V
(standard)
6 quartz Halogen working lights.
2 service lights in engine enclosure.
850
Feller Buncher
Standard Equipment
10 lb. Fire extinguisher, operator and
parts manuals
610 mm (24") double grouser track
shoes with mud/snow relief holes
24V to 12V converter
Optional Equipment
Fire suppression system
Automatic grease lubrication system for
carrier and boom set, except felling head,
and 10 lb. reservoir.
Top rollers in lieu of bolt-on track
slides, two per side (mandatory with 36
shoes)
Hydraulic tank heater (1500W - 110V)
Track sizes and types listed on previous
page
Timberjack, Timbermatic, ShiftTilt, and the donkey symbol are trade marks of Timberjack. BP-10M-08/01
Timberjack Warranty
The Timberjack 850 base carrier is completely engineered
and assembled by Timberjack. The 850 base carrier and all
factory installed sawheads are covered under the
Timberjack warranty program. Consult warranty
documentation and local Timberjack dealer for details.
The manufacturer reserves the right to make changes or add improvements at any time without
incurring any obligation to make such changes on machines manufactured previously.
Some items shown are optional equipment.
www.timberjack.com
Feller Bunchers
SPECIFICATIONS
VEHICLE
Length, less booms................................15' 5"
Width over 24" tracks .............................10' 4"
Width of rotating upper .......................... 9' 8"
Height to top of cab ...............................11' 6"
Ground clearance per SAE J1234
(flat of grouser)........................2' 2"
Tail swing (from rotational center line) ...10' 0"
(4,7
(3,1
(3,0
(3,5
m)
m)
m)
m)
(66 cm)
(3,0 m)
Operating Pressures
850
Boom system ........................3,480 psi
Wrist/Clamps.........................2,540 psi
Swing ....................................3,045 psi
Travel ....................................5,075 psi
Pilot ....................................... 508 psi
Saw .......................................4,350 psi
(24.0
(17.5
(21.0
(35.0
(3.5
(30.0
mPa)
mPa)
mPa)
mPa)
mPa)
mPa)
950
4,350
2,540
3,045
5,075
508
4,350
psi
psi
psi
psi
psi
psi
(30.0
(17.5
(21.0
(35.0
(3.5
(30.0
mPa)
mPa)
mPa)
mPa)
mPa)
mPa)
950
up to 5.3 rpm
950
GROUND CLEARANCE
850
29.1" (739 mm)
27.8" (705 mm)
29.1" (739 mm)
27.4" (705 mm)
27.2" (691 mm)
From tip of grouser
950
29.5"
28.6"
29.5"
27.9"
(749
(732
(749
(708
TRACK TYPE
mm)
mm)
mm)
mm)
TRACK SYSTEM
Undercarriage Weldment......................Fully enclosed unitized weldment using high strength, wear resistant steels. Rock guards are
1" (25 mm) thick high abrasion resistant material. Track side frames are designed with integral
track guarding and have ramp angles at both ends. Access covers are provided for track roller
service. 850 track drive motor housings are inside of 24" tracks. 950 track drive motor housing
bottom plate is fabricated from high abrasion resistant steel. Reinforced belly pan access door
to center section.
Front Idler .............................................Sealed, heavy duty, bronze alloy bearings in oil bath. Spring shock absorber and hydraulic track
tension adjuster.
Track Drives ...........................................Triple reduction planetary type track drive gearboxes with bidirectional 2-speed variable
displacement piston motors. Operator selectable high range lockout for maximum tractive effort.
Drive circuits include integral counterbalance valves to protect motors in overrunning conditions.
Upper Track Slides ................................Wear resistant, replaceable slides are standard. Optional top rollers are available.
Lower Track Rollers ..................850......(8) D6D size tractor rollers per track side frame.
.................................950......(9) D7G size tractor rollers per track side frame.
Traction Brakes ...................................Spring applied travel brake incorporated in both gearboxes. Automatically released
with travel pedal actuation.
850
TRAVEL SPEEDS (per SAE J1309)
Infinitely variable to:
High .............................................2.9 mph (4,7 kph)
Low .............................................1.4 mph (2,3 kph)
950
NOTE: Sprockets and 24" and 30" track shoes are provided with mud/snow relief holes.
VEHICLE
Length, less booms . . . . . . . . . . . . . . . . .18' 2"
Width over 24" tracks . . . . . . . . . . . . . . . .10' 5"
Width of rotating upper . . . . . . . . . . . . . . .9' 8"
Height to top of cab . . . . . . . . . . . . . . . . .11' 9"
Ground clearance per SAE J1234
(flat of grouser) . . . . . . . . . . . . .2' 3"
Tail swing (from rotational center line) . . .10' 7"
(5,5
(3,1
(3,0
(3,6
m)
m)
m)
m)
(69 cm)
(3,2 m)
"Cab ahead" design positions the operator for maximum visibility while the rubber isolation mounting reduces
vibration, noise and fatigue. Sound and temperature insulated with behind the seat lunch box storage area.
Fully adjustable high back suspension seat. Ergonomically designed; hydraulic joysticks with low effort function
buttons and adjustable angle foot pedal travel controls. Spacious and strong, with integral protective structure.
Green tinted Lexan Margard windows reduce the need for cage type guarding. Front window consists of a 3 part
laminate .75 (19mm) thick with a 10 reverse slope to help shed rain and snow. Removable skylight slopes 45
towards the front of the cab to provide excellent upwards visibility and to help shed debris. Large, removable rear
window. Complete with AM/FM cassette radio with two speakers, dome light and 10 lb. fire extinguisher.
Cab, as installed by Timberjack, complies with: SAE J1040 ROPS, SAE J231 FOPS and J1084 OPS.
Less than 77dB(A) at the operators ear while operating hydraulic functions at maximum engine rpm.
Climate Control
Unitized cab pressurizer with inlet air filter, high output heater and air conditioning system with optimized air
distribution. Twin circulation fans integrated into the cab ceiling for even temperature mixing and defogging.
Operator selectable fresh air / recirculation blend control. Separate cab vent complete with insect screen for
enhanced air exchange.
INSTRUMENTATION
Full engine and hydraulic instrumentation.
Gauges: ..............................Engine coolant temperature, Engine oil pressure, Hydraulic oil temperature, Voltage, Fuel level,
Hour meter, Tachometer.
Warning lights: ...................Low hydraulic oil reservoir level, High return filter pressure, Low pump inlet pressure, Air intake
restriction, Low engine coolant level
Warning horn: ....................Loss of engine oil pressure, High engine coolant temperature, High hydraulic oil temperature,
Enclosure open - pilot system on.
ELECTRICAL SYSTEM
Full circuit marking with sealed connectors and manual reset circuit breaker protection. (24 volt to 12 volt battery converter / equalizer
is standard equipment.)
Voltage................................24 volt system,
Alternator ............................70 amp with internal voltage regulator.
Batteries..............................(2) 4D - 1000 CCA @ 0 F (-17.7 0C), 300 RC
Lighting...............................Quartz halogen, total wattage 840 watts in working area, consisting of: 4 x 140 watt (2 x 70 watt each)
flood and 2 x 140 watt (2 x 70 watt each) spot lights
Service Lights
2 x 70 watt inside the engine enclosure.
FELLING HEAD
Koehring Waterous Front Cut Disc Saw Felling Head with multiple tree capability, with 15 wrist rotation
850 model S566 - standard
950 model S586 - standard
cut capacity - 22 (56 cm)
cut capacity - 24 (61 cm)
model S566 - optional
complete with roll over link.
OPTIONAL EQUIPMENT
Automatic fire suppression system.
Automatic grease lubrication system for carrier and boom set, except felling head, with 10 lb. reservoir.
Top rollers in lieu of bolt-on track slides, two per side (mandatory with 36" shoes).
We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty
applicable to the particular product and sale. We make no other, warranty, expressed or implied
A HIGH PRODUCTION
EXTREME SERVICE
FELLER BUNCHER...
The TG475 combines time proven components with a new robust counterweighted
upper structure to provide maximum stability in long boom reach and heavy payload
situations. State-of-the-art load sense hydraulics and highly efficient 300 horsepower
engine make the TG475 the best choice for the most severe operating conditions. Gull
wing enclosures provide easy access to all service points, so more time can be spent
doing productive work.
Leveling system
Hydraulic system
Electrical system
Boom
Lift capacity
(calculated at the pin,
w/o attachment)
Swing
Cab and controls
Return to Index
Go to x
Harvesters
Harvester Heads
Delimbers
Skidders
Forwarders
Processors
Grapples
Winches
Log Loaders
Yarders
Masticators
Return to Index
Go to
Delimbers
Forwarders
SMALLWOOD II
Grapples
Harvesters
Harvesting Heads
Log Loaders
Masticators
Processing
Skidders
Winches
Yarders