Professional Documents
Culture Documents
IP101i Module - Data Sheet - English PDF
IP101i Module - Data Sheet - English PDF
DATA SHEET
Application
The IP101i module is installed in Kamstrup's electricity
meters and reads counts, load profiles and events such as
voltage cut-offs. This data are transmitted via TCP/IP communication to the reading system of the electricity utility. Kamstrup A/S recommends using closed networks, and the IP101
module is thus capable of operating behind a NAT/firewall.
IP101i module
DATA SHEET
Connection diagram
Terminal 65-66 (input)
Status/pulse input
Technical data
Communication
Mechanical data
Protocol IPV4
Dimension (wxhxd mm)
41x19x41
Ethernet
Temperature, storage
-40 C - +70 C
Temperature, operation
-40 C - +60 C
10 Mbit
Electrical data
Supply
Relative humidity
< 95 %,
non-condensing
Power consumption
< 450 mW
Mounting
Load control
Density
Dependent on meter
(IP51/IP54)
Marking/approvals
CE marking
Limit values
EN61600-6 EMC
During configuration
Normal
Fast
20 m
20 m
100 nF
10 nF
0.5 uA
0.5 uA
Frequency, max
0.5 Hz
16.6 Hz
Protocol/
meters
1 secs.
10 ms
KMP
1 secs.
90 ms
DLMS/COSEM
EN62052-11
Approval of electricity
meter
Compatibility
162/282/382 JKLM OMNIPOWER
351 BC
Ordering
IP101i
6850040.21
5810495_C1_GB_05.2014