Professional Documents
Culture Documents
NP-Series - Valve Regulated Lead Acid Battery: Layout
NP-Series - Valve Regulated Lead Acid Battery: Layout
NP7-6
SPECIFICATIONS
Nominal voltage
Ah
6.5
Ah
Length
Width
Height
151 (1)
34 (1)
mm
mm
mm
97.5 (2)
mm
1.32
kg
4.75
mm
DIMENSIONS
Mass (typical)
TERMINAL TYPE
FASTON (Quickfit / release)
OPERATING TEMPERATURE RANGE
Storage
-20C to +60C
Charge
-15C to +50C
Discharge
STORAGE
-20C to +60C
LAYOUT
CASE MATERIAL
Standard Option
ABS (UL.94:HB)
ABS (UL94:V0)
CHARGE VOLTAGE
6.825 (1%)
2.275 (1%)
V
V/cell
-3
mV/cell/C
7.25 (3%)
2.42 (3%)
V
V/cell
-4
mV/cell/C
No limit
1.75
1 second
210
1 minute
48
Internal resistance
N/A
Short-Circuit current
N/A
28
IMPEDANCE
Measured at 1 kHz
NP
DESIGN LIFE
STANDARDS
3 to 5
years
up to 5
years
IEC61056
SAFETY
Installation
Can be installed and operated in any orientation except permanently inverted
Handles
Batteries must not be suspended by their handles (where fitted)
Vent valves
Each cell is fitted with a low pressure release valve to allow gasses to escape and then reseal.
Gas Release
VRLA Batteries release hydrogen gas which can form explosive mixtures in air. Do not place inside a sealed
container
Recycling
YUASA's VRLA batteries must be recycled at the end of life in accordance with local and national laws and
regulations