Professional Documents
Culture Documents
Tank Manufaturing Data
Tank Manufaturing Data
TANK DISCRIPTION
BLOWER
SAMBHAJI
START DATE:
3/3/2015
COMPLETION DATE
DESCRIPTION
Cutting of PPGL/PVC/PPH/CPVC or FRP/FRVE
Welding and Carbon Powder on welding joint
Tank Shell Height
Tank Bottom Flat/Conical/Dished End
Tank Top Flat/Conical/Dished End
Height of Top/Bottom cone / Flat end
Nozzle Fabrication and diameter of nozzles
Flange Fabrication and checking of PCD, OD, No of hole,
Dia of hole
Marking of Nozzles on shell, bottom, and top with proper
orientation, elevation
Mounting of Nozzles on shell, bottom, and top with proper
orientation, elevation
Diameter of Manhole
Height of manhole from bottom of shell
Diameter of drain nozzle
Layer of CSM & WRM on the shell
Layer of CSM on the bottom & Top cone
Welding of Tank and Nozzles from inside
Spark Testing
Checking of gasket and bolts installed as per Dwg.
Coating of Tank & fixing with all components
CHECKED
AJI
COUNTER CHECKED
BLOWER
SAMBHAJI
3/3/2015
DWG. No.
Theoretically
Calculated
Material Type Quantity
ISO Resin
CSM
WRM
Surface
Catalyst
Accelerator
3%
PPHGL 3mm
3mm Sheet
PPHGL 3mm
3mm Sheet
Pipe
3mm
3mm
Available
Quantity
REV.
Practically used
Quantity
Dimension Report
S.No
Description
1 Inside circumference
2 Height of shell
3 Total height
4 diameter
S.No
Nozzle size
Nozzle description
MH
N1
N2
N3
N4
N5
N6
N7
N8
orientation
in degrees
MANHOLE
SPARE
WATER INLET
OVERFLOW
DRAIN
PUMP OUTLET
LEVEL INDICATOR
LEVEL INDICATOR
PH TRANSMITTER
NOTE :
1. Flanges thickness are as per Dwg.
2. Nos of holes, PCD, hole diameter of all flanges are as per Dwg. Requirment.
Clients Representative
al Inspection Report
Tag No :
Description
WO No:
Drawing Ref:
Qty :
imension Report
Required Dimension in mm
measured
orientation
Measured dimension in mm
Elevation in mm
Required
Inspection Authority
Measured
Required
Measured