Professional Documents
Culture Documents
Thermo Kote 1
Thermo Kote 1
THERMOKOTE 1 cements are high temperature insulating cements that are especially formulated from a blend of refractory
minerals by a proprietary process.
These cements can be poured, palmed, troweled or air gunned into place and should always be applied to the full thickness specified
in one application. They have exceptionally good adhesive qualities and may be applied directly to the metal surfaces or over insulated
and refractory surfaces. These cements are produced in the various types as listed and are specially designed to meet the requirements
of specific applications.
PHYSICAL AND MECHANICAL CHARACTERISTICS
K FACTOR
SPECIFICATIONS
ASTM
C-449
FEDERAL
MILITARY
MIL-C-2908A Type II
MIL-I-24244
Service Temperature
*Coverage per 100 lbs.
*Water/Cement Ratio (By Weight)
Shrinkage
*Density (Installed)
Initial Setting
1-FW
1 - GP & 1- GPFF
1-MWP & 1-V
Corrosion (Steel)
(Aluminum)
Moisture and Water Resistance
Fire Resistance
Fire Hazzard Classification Rating does not exceed:
Flame Spread
Fuel Contributed
Smoke Developed
Surface Treatment - Water Base Paints
- Oil Base Paints
- Emulsion Weatherproofing
- Asphalt Base Cut-Backs
Packaging
MEAN TEMP.
200F
400F
600F
K
0.85
0.96
1.05
1200F
30 bd. ft. (wet or dry)
1.1 - 1.25 (6 - 7 gal.)
Negligible
30-34 lbs./cu. ft.
45 to 75 minutes
2 to 3 hours
2 to 3 hours
None
Aluminum must be painted
Does not soften after firmly set
Non-combustible
25
50
50
Any time after setting
Only after thoroughly dry
Any time after setting
Only after thoroughly dry
45 lb. Multiwall Bags
Polyethylene liner