Professional Documents
Culture Documents
Technal MX - Conc - Curtain Wall System
Technal MX - Conc - Curtain Wall System
Technal MX - Conc - Curtain Wall System
Gode
MX
Curtain-wall
P. 2
Rooflight
P. 163
MX - Gode
MX - Gode
Gode
MX
Curtain-walls
Product concept
Performance
Usage charts
Inertia values
Infills
Construction overview
Assembly methods
Applications
Options
Installation examples
Hinge hardware summary
Hardware summary
Profile summary
Accessory summary
Weather gasket summary
Tool summary
Node points (full-scale)
P. 3
P. 7
P. 16
P. 26
P. 32
P. 40
P. 48
P. 52
P. 52
P. 54
P. 56
P. 58
P. 60
P. 62
P. 64
P. 66
P. 68
P. 70
P. 72
P. 74
P. 76
P. 78
P. 80
P. 82
P. 84
P. 93
P. 98
P. 114
P. 116
P. 136
P. 139
P. 141
P. 142
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Product concept
STRUCTURE
CONCEALED VENTS
Grid effect
EFFECTS
Grid effect
Caps clipped onto aluminium pressure plates.
Vertical 52mm x 23mm cap and horizontal
52mm x 15mm cap.
Convex and concave angles from 0 minimum
to 10 maximum.
Horizontal line effect
Horizontal
line effect
Bonding
SSG-type glazing is carried out by qualified
companies following technical specifications and
instructions from Technal and sealant suppliers.
Vertical
line effect
*The conception and dimensions of the systems presented in this catalogue are in compliance with
the French and / or European regulations applicable at the time of the realization of the document.
The aluminium fabricator and/or consultant are entitled to check if these conceptions and dimensions
have to be adapted according to local legislation and all other relevant norms and standards.
MX - Gode
MX - Gode
Product concept
Grid effect
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Product concept
MX - Gode
MX - Gode
Product concept
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Performance
Acoustic performance
Measurements carried out at Saint Gobain Vitrage laboratory in Aubervilliers
(French standard NF S31-051, ISO 140) adjusted according to standard EN ISO 717-1
Grid faade
Component
mm
Type of glass
Measurement
reference
Tilt-and-turn Top-hung
Pressure plate
Dimensions
1430 x 1425
Glass only
Rw + C = RA
in dB : this is an absorbtion coefficient for BACKGROUND noise
RA, tr in dB : this is an absorbtion coefficient for TRAFFIC noise
NAR : New Acoustic Reglementation
All test reports are available and downloadable in PDF format on our Internet site:
www.technal.fr .
Thermal performance
Regulations
H1 and H2
zones
H3 zone
Reference value:
Transparent glass panes
< 50% of the building's
vertical walls
Ucw
2.4
2.6
Reference value:
Transparent glass panes
= 75% * of the building's
vertical walls
Ucw
1.7
1.9
Reference value:
Transparent glass panes
= 100% * of the building's
vertical walls
Ucw
1.4
1.5
Ucw
2.9
H2
H1
H3
UCW values are validated
in France by the CSTB ;
study reference:
CTSB DERIBIV 2002-283
MX - Gode
MX - Gode
Performance
Thermal performance
Glass values
Glass
Note: no certified
emissivity < 0.05
at end 2001
standard clair
Sunergy (Glaverbel)
Planitherm (SGG)
Planibel Plus
(Glaverbel)
Planitherm Futur N
(SGG)
Planistar (SGG)
Planibel Top N
Thermo Plus Energy
(Glaverbel)
Optitherm (Pilkington)
i Plus (Interpane)
Glazing
solar
factors
Glass
thicknesses
4+4 6+6
Climalit clair
Antelio clair
Cool Lite SS108
Planibel clair
Planibel vert
Thermobel Stopsol gris
0.76
Sunergy clair
Sunergy vert
Sunergy azur
0.54
0.52
0.33
0.36
Eko Plus
K Glass
Planibel K Glass
0.69
0.72
0.74
0.65
0.69
0.71
0.65
0.65
Planitherm
Planibel Plus
0.64
0.67
0.61
0.65
Planitherm Futur N
Planistar
Planibel Top N
Thermo Plus Energy
Optitherm
iPlus
0.62
0.42
0.64
0.39
0.63
0.58
0.60
0.41
0.62
0.39
0.78
0.54
0.72
0.59
0.12
0.75
0.46
0.32
0.57
Shutter values
R-values by shutter type
according to ThU 2000 (EN 13125)
R
m2.K/W
0.08
0.14
0.19
- PVC sliding louvred shutter and wood swing shutter (e > 22 mm)
- PVC roller shutter (e > 12 mm)
0.25
0.22
0.26
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Mullion FM155 + cap 6617 + pressure plate FM221 + transom FM155 + cap 6667
for tilt-and-turn vent: mullion FM262 + FM267 + vent FM230
for top-hung vent: mullion FM155 + FM 233 + vent FM231 + FM220
horizontal line effect
Mullion FM155 + gasket JM017 + transom FM155 + caps FM237 + pressure plate FM221
for tilt-and-turn vent: mullion FM262 + FM267 + vent FM230
for top-hung vent: mullion FM155 + FM 233 + vent FM231 + FM220
Sg glazing solar
factor (including any
solar protection)
.
.
.
.
.
.
.
.
Sw Solar
factors - winter
for all joinery finishing
Sw Solar
factors - summer
for all joinery finishing
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
= vent
glazing
.
.
.
.
.
.
.
.
winter
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
summer
MX - Gode
MX - Gode
Performance
Thermal performance
Ucw coefficient of bare faade
Grid effect
with pressure plate
bottom frame
100% glazed
Fixed frames
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Width = 1.35 m
x H Top frame = 0.85 m
x H clear frame = 1.50 m
x H Bottom frame = 1.00 m
XPS Foam
Width = 1.35 m
x H = (1.50 + 1.50) m
Fixed frames
Fixed frames
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2 frames/floor
fixed frames
50% glazed
2 frames/floor
fixed frames
and vents
50% glazed
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 frames/floor
fixed frames
45% glazed
3 frames/floor
fixed frames
and vents
45% glazed
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
MX - Gode
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
alu
XPS foam
alu
alu
XPS foam
Width = 1.35m
x H top frame = 0.85m
x H clear frame = 1.50m
x H bottom frame = 1.00m
Example
Insulating ACERMIcertified extruded
polystyrene panels
32mm
32mm
thickness thickness
glass
alu
XPS foam
alu
Width = 1.35m
x H clear frame = 1.50m
x H bottom frame = 1.50m
alu
U-value of
glass unit
centre pane
XPS foam
Opaque
bottom frame
2 frames per floor
glass
Grid effect
with
pressure plate
Example
Insulating ACERMIOpaque
certified extruded
polystyrene panels
bottom frame
32mm
32mm
3 frames per floor
thickness thickness
MX - Gode
Performance
Thermal performance
Ucw coefficient of bare faade
Horizontal line effect
with pressure plate
bottom frame
100% glazed
Fixed frames
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Width = 1.35 m
x H Top frame = 0.85 m
x H clear frame = 1.50 m
x H Bottom frame = 1.00 m
XPS Foam
Fixed frames
Fixed frames
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2 frames/floor
fixed frames
50% glazed
2 frames/floor
fixed frames
and vents
50% glazed
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 frames/floor
fixed frames
45% glazed
3 frames/floor
fixed frames
and vents
45% glazed
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
NB the silicone bonding of horizontal line effect glazing and vents does not allow Argon infills
13
MX - Gode
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
alu
XPS foam
alu
alu
Width = 1.35m
x H top frame = 0.85m
x H clear frame = 1.50m
x H bottom frame = 1.00m
32mm
32mm
thickness thickness
XPS foam
Opaque
bottom frame
3 frames per floor
Example
Insulating ACERMIcertified extruded
polystyrene panels
glass
alu
XPS foam
Width = 1.35m
x H clear frame = 1.50m
x H bottom frame = 1.50m
alu
alu
U-value of
glass unit
centre pane
32mm
32mm
thickness thickness
XPS foam
Opaque
bottom frame
2 frames per floor
Example
Insulating ACERMIcertified extruded
polystyrene panels
glass
Horizontal
line effect
with
pressure plate
MX - Gode
Performance
Type of test
Air permeability,
Watertightness,
Wind load
Test report
reference n
Results
Test report
reference n
Results
Test report
reference n
Results
Test report
reference n
Satisfactory
No damage as a result of a dynamic shock
Results
Less than 4m3/h/m2 at 1200 Pa pressurisation
Less than 4m3/H/m2 at 900 Pa depressurisation
Watertight at 1200 Pa pressure
No damage at sudden pressure of 2300 Pa
No damage at sudden depressurisation of 1700 Pa
Top-hung frame A3-EE-VE
14
Test report
reference n
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Air permeability,
Watertightness,
Wind load
Test report
reference n
Results
Type of test
Air permeability,
Watertightness,
Wind load
Test report
reference n
Results
Type of test
Results
Test report
reference n
Results
Test report
reference n
Satisfactory
No damage as a result of a dynamic shock
Test report
reference n
Results
Less than 4m3/h/m2 at 1200 Pa pressurisation
Less than 4m3/H/m2 at 900 Pa depressurisation
Watertight at 1200 Pa pressure
No damage at sudden pressure of 2300 Pa
No damage at sudden depressurisation of 1700 Pa
Top-hung frame A3-EE-VE
0203/01
15
MX - Gode
MX - Gode
Usage charts
2 supports
Rectangular type load
16
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Usage charts
2 supports reinforced
Rectangular type load
17
MX - Gode
MX - Gode
Usage charts
3 supports
Mullion with 3 equidistant supports
Rectangular type load
L(m) = mullion centres
18
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Usage charts
3 supports reinforced
Mullion with 3 equidistant supports
Rectangular type load
L(m) = mullion centres
19
MX - Gode
MX - Gode
Usage charts
Transom connectors
Weight on transom Kg
Mullion centres
Weight on transom Kg
Connector
EM017
Weight on transom Kg
Connector
EM016
Connector
EM033
Connector
EM015
Connector
EM014
Connector
EM008
Mullion centres
Mullion centres
Mullion selection should be based on charts only
20
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Usage charts
Reinforced transoms
With anti-rotation spigot EM009
Face mounting, connector
according to profiles
Weight on transom kg
Connector
EM017
Weight on transom kg
Connector
EM016
Connector
A0033
Connector
EM015
Connector
EM014
Connector
EM008
Mullion centres
Mullion centres
Maximum load kg
reinforcement
reinforcement
reinforcement
reinforcement
and
Module width mm
21
MX - Gode
MX - Gode
Usage charts
Examples of use
Single glass
Glass thickness
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
CALCULATION EXAMPLE
Project with horizontal line effect for the whole faade: grid width 1.5m grid height 1.20m in
Marseille for a building 15m high
Assumed pressure for example purposes = 1200 pascals
Selection in the chart for double glazing for a value of 1.2 (free height)
1.28 -1.83
Chart reading
8+6 glazing under 1200 Pa for 0.99 to 1.27 with one pressure plate
less than 0.99:
possible without pressure plate
Double glazing
Glazing
components
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Grid surface
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
option 1
to
to
to
to
to
to
to
to
to
to
to
to
to
to
option 2
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
NB determine the pressure of the site using all coefficients (height effect, site effect, internal and external coefficients, in upper angles, etc)
22
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Usage charts
Glass thickness
to
to
to
to
to
to
to
to
Grid surface
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Glazing
components
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 2 m2
to
to
to
to
to
to
to
to
Maximum S = 1.8 m2
Grid surface
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 2 m2
to
to
to
to
to
to
to
to
to
to
Maximum S = 1.8 m2
Glass thickness
to
to
to
to
to
to
Grid surface
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 2 m2
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 1.8 m2
Double glass
Glazing
components
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Grid surface
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 2 m2
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
Maximum S = 1.8 m2
23
MX - Gode
MX - Gode
Usage charts
Vents
Tilt-and-turn
In-opening
23mm glazing
43 kg/m2 weight
17mm glass
31mm glazing
46 kg/m2 weight
19mm glass
31mm glazing
46 kg/m2 weight
19mm glass
W
Use possible
23mm glazing
43 kg/m2 weight
17mm glass
Use impossible
Top-hung
Ref KM098
Large size stainless friction stay
15 maximum lower opening
to security stop
Ref KM604
Medium size stainless friction stay
19 maximum lower opening
to security stop
Friction stay
ref KM098
Max. weight 120kg
Ref KM097
Small size stainless friction stay
25 maximum lower opening
to security stop
1 sash bolt
BOTTOM-HUNG
2 sash bolts
1 extra KM053 hinge
in frame centre
Friction stay
ref KM604
Max. weight 105kg
Friction stay
ref KM097
Max. weight 80kg
H = transom centres
L = mullion centres
Use possible,
max weight 60kg
Use impossible
24
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Usage charts
SSG scale for vertical wall CSTB reference manual 3130, May 1999
Example:
Frame overall h 1.6m l 1.4m
Region 3 following NV65 December 1999 = 750 Pa
Site coefficient Ks = 1.25 (open country)
Large surface area reduction coefficient = 0.85
Coefficient for building height 50m = 1.55
Windbreak effects = NIL
Internal and external local effect coefficients Ci and Ce = 1.05
Formula = 750 x 1.25 x 0.85 x 1.55 x 1.05 = 1300 pressure
1300 x 0.75 = 980 in nominal depression
Conclusion:
bonding on this frame h = 1.600 x l = 1.400
in this location is POSSIBLE
25
MX - Gode
MX - Gode
Inertia values
Reference
Perimiter
in
in
Profile inertia with reinforcement
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
26
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Inertia values
in
in
Reference
Inertia
without
reinforcement
Inertia
with
reinforcement
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Steel tube
Reference
Inertia
without
reinforcement
Steel tube
Inertia
with
reinforcement
27
MX - Gode
Steel tube
MX - Gode
Inertia values
in
in
Reference
inertia without
Perimiter Profile
reinforcement
Steel plate
Steel plate
Steel plate
28
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Inertia values
in
in
Reference
Inertia
without
reinforcement
29
MX - Gode
MX - Gode
Inertia values
Corner posts
in
in
Reference
Perimiter
in
in
Steel tube
Steel tube
Scale 1/2
Scale 1/2
30
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Inertia values
Sleeve sections
Inertia value for calculating the dead load on transom along the axis XX'
in
in
in
in
Reference
31
Inertia
MX - Gode
MX - Gode
Infills
Infill
Nominal space
Internal gasket
Concave angle
from 0 min to 10 max
Convex angle
from 0 min to 10 max
32
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Infill
mm
Nominal space
mm
Bead
reference
Without
Without
Without
Without
Without
Without
Without
Without
Without
OM042 Gasket
roller may be
used for installation
External gasket
6906
33
MX - Gode
MX - Gode
Infills
Internal gasket
to 10
from 20
from 10
to 20
Scale 1:1
34
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Infill
mm
Nominal space
mm
Bead
reference
External gasket
Internal
reference
gasket angle from angle from
reference 10 to 15 16 to 20
Without
Without
Without
Without
Without
Without
Without
Without
Without
OM042 Gasket
roller may be
used for installation
External gasket
6906
35
External gasket
6918
MX - Gode
MX - Gode
Infills
Infill
Internal gasket
from 10
to 20
to 10
from 20
External gasket
Scale 1:1
Infill
Internal gasket
from 10
to 20
to 10
from 20
External gasket
36
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Infill
mm
Bead
reference
Internal
gasket
reference
External
gasket
reference
Internal
gasket
reference
Bead
reference
For transoms
External
gasket
reference
For mullions
Without
Without
Without
Without
Without
Without
Without
External gasket
6906
37
MX - Gode
MX - Gode
Infills
Nominal space
Infill
Internal gasket
Convex angle
from 0 to 10 max
Concave angle
from 0 to 10 max
38
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Infill
mm
Nominal space
mm
Bead
reference
Internal gasket
reference
Without
Without
Without
Without
Without
Without
Without
Without
Without
OM042 Gasket
roller may be
used for installation
39
MX - Gode
MX - Gode
Construction overview
Internal gasket
Glazing block
support
Spacer gasket
for pressure plate
Pressure plug
for FM221
Pressure plate
Face mounting
junction
Grid effect
connector plug
4mm external
glazing gasket
Caps
40
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Construction overview
Rebate gasket
Glazing wedge
for edged vent
Tilt-and-turn
fixed frame
Tilt-and-turn
security
Internal gasket
Tilt-and-turn
external gasket
Spacer gasket
for pressure plate
Pressure plug
for FM221
Pressure plate
Face mounting
junction
Grid effect
connector plug
4mm external
glazing gasket
Caps
41
MX - Gode
MX - Gode
Construction overview
Top-hung
fixed frame
Internal
gasket
CM160
Top-hung
rebate gasket
Spacer gasket
for pressure plate
Pressure plug
for FM221
Pressure plate
Face mounting
junction
Grid effect
connector plug
4mm external
glazing gasket
Caps
42
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Construction overview
Face mounting
junction
Connector plug
4mm external
glazing gasket
Cap
Cap closer
43
MX - Gode
MX - Gode
Construction overview
Rebate gasket
Glazing wedge
for edged vent
Tilt-and-turn
fixed frame
Tilt-and-turn
security part
Internal gasket
Tilt-and-turn
external gasket
Horizontal line
mullion gasket
Pressure security piece
Spacer gasket
for pressure plate
Pressure plate
Face mounting
junction
Horizontal line
connector plug
4mm external
glazing gasket
Caps
Cap closer
44
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Construction overview
Top-hung
rebate gasket
Top-hung vent
external gasket
Top-hung
security part
Top-hung
fixed frame
CM160
Top-hung
rebate gasket
Internal gasket
Spacer gasket
for pressure plate
Horizontal line
mullion gasket
Pressure plate
Face mounting
junction
Connector plug
4mm external
glazing gasket
Cap
45
Cap closer
MX - Gode
MX - Gode
Construction overview
4mm external
glazing gasket
Cap
46
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Construction overview
Internal weather
gasket
Top-hung
rebate gasket
Top-hung outer frame
finishing gasket
Top-hung
fixed frame
Top-hung
rebate gasket
Face mounting
junction
Cap
Horizontal line
connector plug
Spacer gasket
for pressure plate
4mm external
glazing gasket
47
MX - Gode
MX - Gode
Assembly methods
Face mounting
48
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Assembly methods
Side mounting
Transom
Connector
49
MX - Gode
MX - Gode
Assembly methods
Connector
50
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Assembly methods
51
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Height = H-22
Length = L-22
Transom
Mullion
Gasket as per
glazing table
Mullion centres = L
52
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
Glazing bead
FM221
Pressure plate
Mullion cap
Transom cap
WEATHERING PROFILES
Reference
Quantity
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
as per grid
as per grid
as per grid
ACCESSORIES
TOOLS
Quantity
2 per trans.
2 per trans.
4 per trans.
4 per trans.
Description
Reference
Connector
as per trans. 2 per trans.
2 per trans.
2 per trans.
5/m
2 per trans.
1 per cap
Description
Connector
Connector plug for side mounting
53
MX - Gode
MX - Gode
Applications
Transom
reference point
L = Mullion centres
e = infill thickness
Glazing dimensions
Cap rake angle
Transom dimensions
Pressure plate dimensions
6614 cap dimensions
6667 cap dimensions
dimensions do not take expansion into account
FRONT OR SIDE MOUNTING
VENTS ON FLAT SECTIONS ONLY
54
Mullion centreline
reference point
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
6617
6614 or 6667
FM221
Reference
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
Glazing bead
Mullion cap
Transom cap
Pressure plate
WEATHERING PROFILES
Quantity
as per grid
As per formula
L as per formula
as per grid
L as per formula
as per grid as per formula
ACCESSORIES
Quantity
2 per trans.
2 per trans.
4 per trans.
2 per trans.
TOOLS
Description
FM093 profile
to be cut
2 per trans.
Connector
according
to transom
and angula
8 per trans. CBLX screw ST 4.8 x 16 C
2 per trans. Connector plug for side mounting
2 per trans.in accord
-ance with DTU 39
2 per trans.
5/m
2 per trans.
1 per cap
Description
55
MX - Gode
Applications
Transom
reference point
L = Mullion centres
Transom dimensions
Transom height always
less than mullion
e = infill thickness
MX - Gode
Glazing dimensions
56
Mullion centreline
reference point
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
FM032
FM015
6614 or 6667
FM271
FM221
Preparation
Reference
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
As per grid
Glazing bead
Mullion cap
Transom cap
Mullion pressure plate
Transom pressure plate
WEATHERING PROFILES
Quantity
as per grid
As per formula
L as per formula
as per grid
As per formula
as per grid
L as per formula
ACCESSORIES
TOOLS
Quantity
FM093 profile
to be cut
according
to transom
and angula
2 per trans.
Reference
Description
Description
Connector
4/m
5/m
2 per trans.
1 per cap
57
MX - Gode
MX - Gode
Applications
Transom
reference point
Transom dimensions
h = Transom height
Glazing dimensions
58
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
6617
6614 or 6667
FM221
Reference
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
Glazing bead
Mullion cap
Transom cap
Pressure plate
WEATHERING PROFILES
Quantity
as per grid
As per formula
L as per formula
as per grid
As per formula
as per grid as per formula
ACCESSORIES
TOOLS
Quantity
FM093 profile
to be cut
according
to transom
and angula
2 per trans.
Description
Description
Connector
2 per trans.
5/m
2 per trans.
1 per cap
59
MX - Gode
MX - Gode
Applications
Transom
reference point
l thi
infil
e=
ckn
ess
Glazing dimensions
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
FM016
FM032
FM015
6614 or 6667
FM270
FM221
Preparation
Reference
Cutting formula
As per grid
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
As per grid
WEATHERING PROFILES
Quantity
H as per grid
As per formula
H - 52.5
H - 30 L as per formula
H as per grid
As per formula
H as per grid
L as per formula
ACCESSORIES
TOOLS
Quantity
FM093 profile
to be cut
according
to transom
and angula
2 per trans.
Reference
Description
Description
Connector
4/m
5/m
2 per trans.
1 per cap
61
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Height = H-91
Length = L-91
Half-transom
Half-mullion
or
23mm glazing
31mm glazing
23mm glazing
31mm glazing
Angle
+ or 10
max.
Mullion centres = L
62
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
GRID PROFILES
Reference
Preparation
Quantity
As per grid
As per grid
As per grid
As per grid
As per infill
FM265 or FM266
VENT PROFILES
FM267
FM230
or
FM 240
FM220
FM060
Cutting formula
H as per grid
L
H - 52
L or L - 52
H - 30 L - 52
cutting allowance = 0.5mm
Reference
Quantity
Preparation
Cutting formula
Fixed frame
Vent +
thermal break
Glazing 23mm
Glazing 31mm
Bonding profile
Espagnolette rod
See hardware
GRID ACCESSORIES
Reference
VENT ACCESSORIES
Description
Reference
Quantity
4 per half-trans.
2 per trans.
2 per trans.
4 per trans.
2 per trans.
Reference
Quantity
2 per frame
Description
2 per trans.
2 per trans.
Connector
Connector plug
GRID TOOLS
Reference
VENT TOOLS
Reference
Description
Description
For caps and pressure plates, see GRID ASPECT FIXED FRAMES section
See fabrication catalogue for machining
63
MX - Gode
MX - Gode
Applications
Transom centres = H
CM160
Glazing dimensions
Height = H-88
Length = L-87
23mm glazing
31mm glazing
23mm and 31mm glazing
Angle
+ or 10
max.
Mullion centres = L
64
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
VENT PROFILES
Reference
FM233
FM231
FM 232
FM220
FM060
Preparation
Quantity
Cutting formula
Vent +
thermal break
Fixed frame
Vent glazing 23mm
Vent glazing 31mm
Bonding profile
Espagnolette rod
See hardware
GRID ACCESSORIES
VENT TOOLS
VENT ACCESSORIES
Reference
Quantity
2 per frame
Reference
Description
Description
Corner cleat 10 x 43
Corner cleat 7.5 x 34
SSG Glazing wedge
Top-hung security part
CBLX screw ST 4.8 x 22 C
See hardware
For grid, caps and pressure plates, see GRID ASPECT FIXED FRAMES section
See fabrication catalogue for machining
65
MX - Gode
MX - Gode
Applications
MANDATORY
Half-transom
Glazing dimensions
Height = H-111
Length = L-111
Half-mullion
or
31mm glazing
Angle
+ or 10
max.
66
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
GRID PROFILES
Reference
Preparation
Quantity
As per grid
As per grid
As per grid
As per grid
As per infill
FM265 or FM266
VENT PROFILES
FM267
H as per grid
L
H - 52
L or L - 52
H - 30 L - 52
cutting allowance = 0.5mm
Reference
Preparation
Cutting formula
Quantity
FM220
FM060
Bonding profile
Vent +
thermal break
Fixed frame
FM234
Espagnolette rod
See hardware
Reference
Quantity
VENT ACCESSORIES
Description
Reference
Quantity
2 per frame
4 per half-trans.
2 per trans.
2 per trans.
4 per trans.
2 per trans.
2 per trans.
2 per trans.
Description
GRID TOOLS
Reference
GRID ACCESSORIES
Connector
Connector plug
Reference
VENT TOOLS
Reference
Cutting formula
Description
Description
For caps and pressure plates, see GRID ASPECT FIXED FRAMES section
See fabrication catalogue for machining
67
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Height = H-22
Length = L-22
Transom
Mullion
Gasket as per
glazing table
SSG type glass, CEKAL-certified,
arissed on vertical edges
Mullion centres = L
68
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
Pressure plate
WEATHERING PROFILES
Reference
2 per trans.
2 per trans.
4 per trans.
2 per trans.
Connector
as per trans. 2 per trans.
2 per trans.
L as per grid
L as per grid
TOOLS
as per grid
ACCESSORIES
Reference
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
Glazing bead
* Transom cap
* FM221
Quantity
Reference
Description
Description
Connector
OPTION
1 per end cap
69
MX - Gode
MX - Gode
Applications
Transom
reference point
L = Mullion centres
e = infill thickness
c = Cap height
Glazing dimensions
Transom dimensions
Pressure plate dimensions
70
Mullion centreline
reference point
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
Glazing bead
FM221
Pressure plate
Transom cap
WEATHERING PROFILES
Reference
2 per trans.
2 per trans.
4 per trans.
2 per trans.
FM093 profile
to be cut
according
to transom
and angula
H as per grid
As per formula
H - 30 L as per formula
As per formula
As per formula
TOOLS
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
ACCESSORIES
Reference
Quantity
Reference
Description
2 per trans.
Connector
8 per trans.
2 per trans.
Description
71
MX - Gode
MX - Gode
Applications
Transom
reference point
Transom dimensions
h = transom height
Glazing dimensions
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
Glazing bead
FM221
Pressure plate
Transom cap
WEATHERING PROFILES
Reference
FM093 profile
to be cut
according
to transom
and angula
2 per trans.
8 per trans.
2 per trans.
H as per grid
As per formula
H - 30 L as per formula
As per formula
As per formula
TOOLS
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
ACCESSORIES
Reference
Quantity
Description
Description
Connector
73
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Height = H-91
Length = L-91
Half-transom
Half-mullion
or
23mm glazing
31mm glazing
23mm glazing
31mm glazing
Mullion centres = L
74
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
GRID PROFILES
Reference
Preparation
Quantity
As per grid
As per grid
As per grid
As per grid
As per infill
FM265 or FM266
VENT PROFILES
FM267
FM230
or
FM 240
FM220
FM060
Cutting formula
H as per grid
L
H - 52
L or L - 52
H - 30 L - 52
cutting allowance = 0.5mm
Reference
Preparation
Quantity
Cutting formula
Fixed frame
Vent +
thermal break
See hardware
GRID ACCESSORIES
Reference
VENT ACCESSORIES
Description
Reference
Quantity
4 per half-trans.
2 per trans.
2 per trans.
4 per trans.
2 per trans.
Reference
Quantity
2 per frame
Description
2 per trans.
2 per trans.
Connector
Connector plug
GRID TOOLS
Reference
VENT TOOLS
Reference
Description
Description
For caps and pressure plates, see GRID ASPECT FIXED FRAMES section
See fabrication catalogue for machining
75
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Height = H-88
Internal glazing: Length = L-87
External glazing: Length = L-22
23mm glazing
31mm glazing
23mm and 31mm glazing
Mullion centres = L
76
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
VENT PROFILES
Reference
Quantity
Fixed frame
Vent glazing 23mm
Vent glazing 31mm
Bonding profile
Espagnolette rod
Cutting formula
W
W
Vent +
thermal break
FM233
FM231
FM 232
FM220
FM060
Preparation
See hardware
GRID ACCESSORIES
VENT TOOLS
VENT ACCESSORIES
Reference
Quantity
2 per frame
Reference
Description
Description
Corner cleat 10 x 43
Corner cleat 7.5 x 34
SSG Glazing wedge
Top-hung security part
CBLX screw ST 4.8 x 22 C
See hardware
For grid, caps, and pressure plates, see the HORIZONTAL LINE EFFECT FIXED FRAMES section
See fabrication catalogue for machining
77
MX - Gode
MX - Gode
Applications
MANDATORY
Glazing dimensions
Half-transom
Height = H-111
Length = L-111
or
Half-mullion
31mm glazing
Mullion centres = L
78
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
GRID PROFILES
Reference
Preparation
Quantity
As per grid
As per grid
As per grid
As per grid
As per infill
FM265 or FM266
VENT PROFILES
FM267
Cutting formula
H as per grid
L
H - 52
L or L - 52
H - 30 L - 52
cutting allowance = 0.5mm
Reference
Preparation
Quantity
Cutting formula
FM234
FM220
FM060
Bonding profile
Vent +
thermal break
Fixed frame
Espagnolette rod
See hardware
Quantity
VENT ACCESSORIES
Description
Reference
Quantity
4 per half-trans.
2 per trans.
2 per trans.
4 per trans.
2 per trans.
2 per frame
2 per trans.
2 per trans.
GRID TOOLS
Reference
Connector
Connector plug
VENT TOOLS
Reference
Description
Reference
GRID ACCESSORIES
Reference
Description
Description
For caps and pressure plates, see the HORIZONTAL LINE EFFECT FIXED FRAMES section
See fabrication catalogue for machining
79
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
Transom
Mullion
Gasket as per
glazing table
Mullion centres = L
Cap
80
Height = H-22
Length = L-22
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
PROFILES
Reference
Preparation
FM032
Glazing bead
FM221
Pressure plate
Transom cap
WEATHERING PROFILES
Reference
2 per trans.
2 per trans.
4 per trans.
2 per trans.
Connector
as per trans. 2 per trans.
2 per trans.
as per grid
L
W
L as per grid
L as per grid
H as per grid
L
TOOLS
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
ACCESSORIES
Reference
Quantity
Reference
Description
Description
Connector
OPTION
Tool for JM150 machining
81
MX - Gode
MX - Gode
Applications
Transom centres = H
Glazing dimensions
23mm glazing
31mm glazing
23mm and 31mm glazing
Mullion centres = L
82
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
VENT PROFILES
FM233
FM231
FM 232
FM220
FM060
Preparation
Quantity
Fixed frame
Vent glazing 23mm
Vent glazing 31mm
Bonding profile
Espagnolette rod
Cutting formula
L
Vent plus profile
dimensions
Reference
L
L
See hardware
GRID ACCESSORIES
VENT TOOLS
VENT ACCESSORIES
Reference
Quantity
2 per frame
Reference
Description
Description
Corner cleat 10 x 43
Corner cleat 7.5 x 34
SSG Glazing wedge
Vertical line Top-hung security part
CBLX screw ST 4.8 x 22 C
See hardware
For grid, caps, and pressure plates, see the VERTICAL LINE EFFECT FIXED FRAMES section
See fabrication catalogue for machining
83
MX - Gode
MX - Gode
Options
Vent transoms
Grid effect top-hung
FM137 dimensions = W - 148
84
Minimum centreline
width = 800mm
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
W = Mullion centres
Minimum centreline
width = 800mm
W = Mullion centres
85
MX - Gode
MX - Gode
Options
86
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
87
MX - Gode
MX - Gode
Options
20/10
metal sheet
FE123 with
1112 clip
Convex angle
Convex angle
88
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Options
Convex angle
89
MX - Gode
MX - Gode
Options
90
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Options
91
MX - Gode
MX - Gode
Options
Expansion mullion
Plate 50x14
or 50 x 12
Transom securing
by connector only
Scale: 1:1
92
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Installation examples
Scale: 1:1
93
MX - Gode
MX - Gode
Installation examples
Scale: 1:1
94
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Mandatory
weatherproofing
15/10
metal sheet
Scale: 1:1
95
MX - Gode
MX - Gode
Installation examples
Scale: 1:1
96
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Scale: 1:2
97
MX - Gode
MX - Gode
98
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Friction stay
2 lock points
Hinge
or
or
99
MX - Gode
MX - Gode
Friction stay
4 lock points
Hinge
or
or
100
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Friction
stay
6 lock
points
Hinge
or
or
101
MX - Gode
MX - Gode
or
Friction stay
KM021 : Tilt-and-turn espagnolette
KM022 : Friction stay with brake
KM052 : Lock-in-opening frame
KM049 : Half-spacer
KM047 : Right hinge set for in-opening frame
or
KM048 : Left hinge set for in-opening frame
OPTION
CM012 : Handle reinforcers
3 lock points
Hinge
or
or
102
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
or
Friction
stay
6 lock
points
Hinge
or
or
103
MX - Gode
MX - Gode
or
Friction stay
5 lock points
Hinge
or
or
104
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
or
or
Lock centreline
Assembly instructions:
X= 1/3 minimum of H
1. Fix the wedge (2) in line with the machining on the profile
2. Slide the sliding parts (drivers (2), rod and bolt (1))
3. Engage the casing in the wedge and slot it into the drivers (2)
4. Mount the securing base plate (4) and fix it to the casing
5. Secure the escutcheon (3) onto the base plate
6. Mount the lever (3) and lock into place
105
MX - Gode
MX - Gode
Friction
stay
KM004
KM005
KM097
KM601
KM600
Friction
stay
W
W
if W
if W
106
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Friction
stay
KM004
KM005
KM098
KM601
KM197
Friction
stay
if W
if W
W
W
if W
if W
if W
if W
107
MX - Gode
MX - Gode
Friction
stay
KM004
KM005
KM097
KM601
KM600
KM198
108
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
1201 - 1600
600 - 1750
Friction
stay
Friction
stay
KM004
KM005
KM604
KM601
KM600
if W
W
W
if W
109
MX - Gode
MX - Gode
W
W
W
Assembly instructions:
110
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
or
Right
Left
Friction stay
KM051
KM132
or
KM133
KM160
Hinge
111
MX - Gode
MX - Gode
Friction
stay
Friction
stay
KM022 : Friction stay with brake
KM053 : 2 hinges for bottom-hung frame
KM089 : 1 latch
Hinges
112
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Friction
stay
Friction
stay
KM022 : Friction stay with brake
KM053 : 2 hinges for bottom-hung frame
KM089 : 1 latch
Hinges
113
MX - Gode
MX - Gode
Hardware summary
Handle for
casement bolt
Handle reinforced
Heightener for
embedded casing
Cylinder lock
Top-hung locking
point
Left hardware
Open out non
locking handle
Right hardware
Tilt-and-turn handle
Left hardware
Right hardware
Locking wedge
Locking
wedge
and
connector
114
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Hardware summary
115
MX - Gode
MX - Gode
Profile summary
Mullion/transom profiles
Sleeve-steel tube
Sleeve
Sleeve-steel tube
116
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Mullion/transom profiles
Sleeve
Sleeve
117
MX - Gode
MX - Gode
Profile summary
Mullion/transom profiles
Sleeve
Sleeve
118
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Mullion/transom profiles
Sleeve
Sleeve
119
MX - Gode
MX - Gode
Profile summary
Mullion/transom profiles
Sleeve
Sleeve
120
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Mullion/transom profiles
Sleeve
Sleeve
121
MX - Gode
MX - Gode
Profile summary
Mullion/transom profiles
Sleeve
Mullion
only
122
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Corner post
e
St
123
b
tu
el
MX - Gode
MX - Gode
Profile summary
Mullion/transom profiles
Sleeve 35 x 35 x 4
124
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
125
MX - Gode
Conn.
EM108
Conn.
EM107
126
Conn.
EM107
MX - Gode
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Miscallaneous profiles
Corner
cleat
127
Steel plate
Steel tube
MX - Gode
Profile summary
Miscallaneous profiles
Alternative
Corner cleat
Steel plate
MX - Gode
128
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Internal transom
Cill clip
1112
white PVC
129
MX - Gode
MX - Gode
Profile summary
Corner cleat
EM110
Glazing
23 mm
Glazing
31 mm
Corner cleat
EM110
Corner cleat
EE034
Corner cleat
EM059
130
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Corner cleat
EM012
Corner cleat
EM002
Glazing
23 mm
Corner cleat
EM002
Glazing
31 mm
131
MX - Gode
MX - Gode
Profile summary
Glazing
31 mm
Corner cleat
EE034
132
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Caps
133
MX - Gode
MX - Gode
Profile summary
Pressure plates
Pre-drilled
Pre-drilled
Miscallaneous profiles
19.5
4.5
Pre-drilled
134
Pre-drilled
135
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Profile summary
Expansion profiles
MX - Gode
MX - Gode
Accessory summary
Mullion connector
plug
Top-hung security
part
Tilt-and-turn
security part
Top-hung
security part
Finishing plug 10
Glazing block
support
Cap closer
for FM237
SSG Glazing
wedge
Pressure security
piece
Grid effect
connector plug
Pressure security
piece
Connector plug
Glazing wedge
for edged vent
Glazing block
support
136
Variable angle
corner cleat
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Accessory summary
Mullion side
mounting connector
40mm and 50mm
Anti Rotation
Spigot
Transom side
mounting connector
60mm
Transom side
mounting connector
80mm and 90mm
Transom side
mounting connector
120mm
Transom side
mounting connector
140mm, 150mm, 160mm
Transom side
mounting connector
100mm and 110mm
Face mounting
junction
Connector
for FM262
Connector for
FM263 FM264
137
MX - Gode
MX - Gode
Accessory summary
Pop rivet
for cap fixing
CBLX screw
ST 4.8 x 16 C
footprint 20
CBLX screw
ST 4.8 x 22 C
footprint 20
FX screw
ST 4.8 x 16 C
footprint 20
CBLX screw
ST 4.8 x 13 C
footprint 20
CBLX self-tapping
screw ST 4.8 x 16
footprint 20
CBLX screw
ST 4.8 x 32 C
footprint 20
CBLX self-tapping
screw ST 4.8 x 19
footprint 20
Cyanocryalate
adhesive
Weatherproofing glue
for EPDM plugs
Cill clip
FX screw
ST 4.8 x 19 C
footprint 25
Dual component
Alu/Alu adhesive
Solvent-free
silicone sealant
Pressure plug
for FM221
138
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Angle gasket
4 angles w/JM161
Angle gasket
Parts to be removed
Linear gasket
139
MX - Gode
MX - Gode
Espansiveness
gasket (40 to 85)
Glazing gasket
Multifonction gasket
Glazing gasket 2 mm
Glazing gasket 3 mm
Weathering gasket
Linear gasket
140
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Tool summary
Template
for side mounting
Stepped drill
bit 10
and 5
Pair of
gasket scissors
Gasket roller
Embedded
casement bolt template
Delivered with
stepped drill bit
Set of cutting
wedges
Freestanding tool
for vent machining
Freestanding tool
for vent machining
141
Freestanding tool
for pressure plate
and cap drainage
Butyl cartridge,
black
MX - Gode
MX - Gode
scale: 1/1
142
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
143
MX - Gode
MX - Gode
scale: 1/1
144
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
145
MX - Gode
MX - Gode
scale: 1/1
146
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
147
MX - Gode
MX - Gode
scale: 1/1
148
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
149
MX - Gode
MX - Gode
150
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
151
MX - Gode
MX - Gode
Scale: 1/1
152
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Scale: 1/1
153
MX - Gode
MX - Gode
scale: 1/1
154
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
Scale: 1/1
155
MX - Gode
MX - Gode
scale: 1/1
156
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
157
MX - Gode
MX - Gode
scale: 1/1
158
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
159
MX - Gode
MX - Gode
Scale: 1/1
160
sure plate - Curtain-wall with continuous pressure plate - Curtain-wall with continuous pressure plate - Curtain-wall
scale: 1/1
161
MX - Gode
Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note -
Rooflight with continuous pressure plate - Rooflight witRooflight with continuous pressure plate - Rooflight with
Gode
MX
Rooflight
Product concept
P. 164
Performance
P. 166
Usage charts
P. 168
Inertia values
P. 188
Infills
P. 189
Construction overview
P. 190
Assembly methods
P. 192
Applications
P. 194
P. 194
P. 196
P. 198
P. 200
Options
P. 202
Installation examples
P. 205
Profile summary
P. 211
Accessory summary
P. 212
P. 215
Tool summary
P. 215
P. 216
163
MX - GEODE
MX - Gode
Product concept
Grid effect
STRUCTURE
EFFECTS
Grid
Grid effect
Vertical
line effect
Weatherproofing
Collection and drainage of any water
ingress is via profile rebates.
Internal weatherproofing is by EPDM
gasket. Externally, a butyl strip on mullions
and transoms is used, or a foam seal +
silicone weatherproofing on transoms for
vertical line effect finishes.
Rooflight
164
Minimum slope:
- 10 for single glazing and 15 for insulating
glazing unless otherwise specified.
Roof opening frames
Roof vents may be integrated: 6-30mm
glazing.
60 opening, electrically controlled.
Ver
tic
al l
ine
effe
c
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
t
ffec
de
Gri
165
MX - Gode
MX - Gode
Performance
Thermal performance
Solar factor and thermal transmission U-values
Gode faade with pressure plate : skylight
Grid and vertical line effects: FM155 + FM032 + FM048 cap + FM167 transoms + FM063 cap + HM508 vent
Sg glazing solar
factor (including any
solar protection)
Fixed light
Sw factor for all
finishing
Bare external fitting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Sg glazing solar
factor (including any
solar protection)
.
.
.
.
.
.
.
.
Fixed light
Sw factor for all
finishing
Bare external fitting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
166
.
.
.
.
.
.
.
.
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Transom
(1/3 scale)
Rooflight
with pressure plate
Variants
Grid effect
W = 1.35 m x H = 1.50 m
Fixed frames
Vent only
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Vent only
167
MX - Gode
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MX - Gode
Usage charts
1. Mullion selection
- Determine the surface load Q.
- Select the mullion according to load.
2. Transom selection
- Determine the load q.
- Check the maximum permissible dimension according to load.
168
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Kg / m2
Kg / m2
Kg / m2
Kg / ml
meter
decimal degrees
meter
meter
Qv and Qn values are to be determined according to the Snow and Wind criteria (NV65 December 1999):
region, Ks site coefficient, large surface reduction coefficient, building height qH/q10,
masking effect, local external and internal activity coefficients Ce and Ci.
Gri
dw
idth
gth
n
e
L
formula:
169
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
Length (L)
170
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
171
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
172
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
173
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
174
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
175
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
176
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
177
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
178
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
179
MX - Gode
MX - Gode
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
180
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Width (w)
.
Length (L)
Width (w)
.
Length (L)
181
MX - Gode
MX - Gode
Usage charts
FM167 transoms
Chart 1
Transom choice
formula:
FM167 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
FM167 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
182
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Transom choice
formula:
40x27x2 reinforced FM167 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
40x27x2 reinforced FM167 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
183
MX - Gode
MX - Gode
Usage charts
FM168 transoms
Chart 1
Transom choice
formula:
FM168 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
FM168 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
184
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Transom choice
formula:
40x27x2 reinforced FM168 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
40x27x2 reinforced FM168 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
185
MX - Gode
MX - Gode
Usage charts
FM273 transoms
Chart 1
Transom choice
formula:
FM273 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
FM273 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
186
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Usage charts
Transom choice
formula:
40x40x4 reinforced FM273 profile limit calculations for a load perpendicular to glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
Chart 2
formula:
40x40x4 reinforced FM273 profile limit calculations for a load in glazing plane
2.8
Transom length in m
2.6
2.4
2.2
1.8
1.6
1.4
1.2
187
MX - Gode
MX - Gode
Inertia values
Reference
in
in
in
in
in
in
Inertia
without
reinforcement
Inertia
with
reinforcement
188
in
in
in
in
in
in
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Infills
Glazing bead
Glazing bead
Glazing bead
Glazing bead
Glazing bead
Glazing bead
Glazing bead
Glazing bead
VENTS
Infill
External gasket
Internal gasket
Reducer fitting
Bead clip gasket
without
without
without
without
without
without
without
without
elastomer such as
TREMCO Proglaze C)
189
MX - Gode
MX - Gode
Construction overview
Grid effect
Cap
for transom
pre-drilled
transom
pressure plate
Butyl strip
50mm wide
Weatherproof
screw for skylight
Skylight
glass support
External
glazing gasket
Glazing gasket
for transom
Transom
Skylight
connector
Glazing gasket
for mullion
Mullion
Glazing bead
190
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Construction overview
Pre-drilled mullion
ressure plate
Weatherproof
screw for skylight
External
glazing gasket
Skylight
glass support
Butyl strip
50mm wide
Transom
Glazing gasket
for transom
Skylight
connector
Glazing gasket
for mullion
Mullion
Glazing bead
191
MX - Gode
MX - Gode
Assembly methods
Assembly details
PYRAMID SKYLIGHT
PYRAMID
Transom
Hip
Intermediate mullion
192
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Hip
Intermediate mullion
PYRAMID
PYRAMID
Intermediate mullion
Hip
193
MX - Gode
MX - Gode
Applications
som
Tran
tres
cen
=H
pre-drilled
Glazing dimensions
Height = H-16
Width = W-20
Mullion centres = W
Gasket as per
glazing table
Mullion
194
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
PROFILES
Reference
Preparation
FM032
Glazing bead
FM276
FM277
Mullion cap
Transom cap
Quantity
Cutting formula
As per grid
As per grid
As per infill
As per grid
As per grid
As per grid
H as per grid
W - 30
H - 52 W - 30
H as per grid
W - 53
H as per grid
W - 61
WEATHERING PROFILES
Reference
ACCESSORIES
Reference
Quantity
2 per trans.
1 / 200 mm
TOOLS
Description
Skylight connector
Skylight glass support
Weatherproof screw for skylight
Description
195
MX - Gode
MX - Gode
Applications
om
s
Tran
s=
tre
cen
Glazing dimensions
Height = H-16
Width = W-20
Mullion centres = W
Gasket as per
glazing table
Mullion
196
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
PROFILES
Reference
Preparation
FM032
Glazing bead
FM276
Mullion cap
Quantity
As per grid
As per grid
As per infill
As per grid
As per grid
Cutting formula
H as per grid
W - 52
H - 52 W - 30
H as per grid
H as per grid
WEATHERING PROFILES
Reference
TOOLS
ACCESSORIES
Reference
Quantity
2 per trans.
1 per trans.
1 / 200 mm
Reference
Description
Skylight connector
Skylight glass support
Horizontal pressure block
for vertical line skylight
Weatherproof screw for skylight
197
Description
MX - Gode
MX - Gode
Applications
Glazing dimensions
Height = H-204
Width = W-204
198
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
VENT PROFILES
Reference
Preparation
Quantity
Vent frame
Cutting formula
W
Fixed frame
for mullion
W
Reference
W
W
W
W
W
W
ACCESSORIES
Reference
Quantity
Description
Reference
199
or
or
Quantity
Description
MX - Gode
MX - Gode
Applications
Glazing dimensions
Height = H-226
Width= W-226
200
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
VENT PROFILES
Reference
Preparation
Quantity
Vent frame
Cutting formula
W
Fixed frame
for mullion
W
Reference
W
W
W
W
W
W
ACCESSORIES
Reference
Quantity
Description
Reference
201
or
or
Quantity
Description
MX - Gode
MX - Gode
Options
Scale: 1:1
202
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Options
Scale: 1:1
203
MX - Gode
MX - Gode
Options
Scale: 1:1
204
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Installation examples
Ver
tic
al l
ine
effe
ct
Rooflight
205
MX - Gode
MX - Gode
Installation examples
Rooflight
Ver
tica
ll
ine
effe
ct
206
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
207
MX - Gode
MX - Gode
Installation examples
Rooflight
208
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
209
MX - Gode
MX - Gode
Installation examples
Pyramid
Horizontal cross section
210
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Profile summary
Transom profiles
211
MX - Gode
MX - Gode
Profile summary
Mullion
Transom
Cap profile
Mullion
pre-drilled
212
Transom
pre-drilled
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Profile summary
Rooflight profiles
213
MX - Gode
MX - Gode
Accessory summary
Standard hinge
Rebate bracket
Skylight glass
support
Horizontal pressure
block for vertical line
skylight
Self-locating
corner cleat 15x35
Self-locating
corner clear 13.2x20
Crimp
corner cleat 25x5
Skylight connector
Weatherproof screw
for skylight
Manual opening
mechanism
Electric opening
mechanism set
Opening mechanism
fixing set for 2105
Electric chain
opening mechanism
214
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Tool summary
Variable cleat
drilling jig
215
MX - Gode
MX - Gode
Scale 1/1
216
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
217
MX - Gode
MX - Gode
Scale 1/1
218
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
219
MX - Gode
MX - Gode
Scale 1/1
220
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
221
MX - Gode
MX - Gode
Pyramid
Horizontal cross section
Scale 1/1
222
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
223
MX - Gode
MX - Gode
Scale 1/1
224
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
225
MX - Gode
MX - Gode
Scale 1/1
226
plate - Rooflight with continuous pressure plate - Rooflight with continuous pressure plate - Rooflight with conti-
Scale 1/1
227
MX - Gode
Rooflight with continuous pressure plate - Rooflight witRooflight with continuous pressure plate - Rooflight
Hip on pyramid
Scale 1/1
228
Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note - Note -