Professional Documents
Culture Documents
Querying Call Resource Usage of An MS
Querying Call Resource Usage of An MS
Querying Call Resource Usage of An MS
Page 1 of 3
Procedure (BSC6900V900R011C00)
1.
On the Web LMT, run the DSP CALLRES command. Then, press Enter or click Assist.
2.
3.
Set the ID based on the specified User Query Type. Then, click Exec.
Operation Results
An example of the query results is as follows:
%%DSP CALLRES: USERIDTYPE=BYMSISDN, MSISDN="13988880042";%%
RETCODE = 0
Execution succeeded.
General Info.
------------TMSI Info.
<NULL>
IMSI Info.
460190188880104
MSISDN Info.
13988880042
IMEI Info.
<NULL>
Call Ccb.
23
(Number of results = 1)
MS Info.
-------Service Type.
Speech
Cell No.
Trx No.
Ch No.
Cipher Mode.
<NULL>
Start date.
2009-07-29 19:37:10
(Number of results = 1)
Speech Info.
-----------RxLevUL.
32
RxLevDL.
33
RxQualUL.
RxQualDL.
BsPower.
MsPower.
MeanBep.
<NULL>
TA.
Speech Ver.
EFR
(Number of results = 1)
Abis Chno Ts Info
----------------SubRack No.
Slot No.
18
Port No.
Ts No.
SubTs No.
Trx No.
Chno No.
SubChno No.
(Number of results = 1)
A Chno Ts Info
-------------SubRack No.
Slot No.
26
Port No.
Ts No.
120
Cic No.
15
(Number of results = 1)
Page 2 of 3
Page 3 of 3
TC Resource Info
---------------SubRack No.
Slot No.
Dsp No.
Tc Channel No.
EFR
12.2K
Sence Mode
TRAU-TC
Loopback Type
No Loop
Loopback Direction
No Loop
Tfo State
<NULL>
<NULL>
A Interface sid
<NULL>
<NULL>
(Number of results = 1)
Subrack Link Ts Info
-------------------Corresponding results not found
Abis IP Info
-----------Corresponding results not found
Abis Hdlc Info
-------------Corresponding results not found
---
END
The query result shows the call resource usage of the MS, including information about the BM
subrack, TC link, A interface, and Ater interface. The query result also includes information such
as DSP number, channel number, service type, circuit identification codes (CICs) on the A
interface, as well as timeslots occupied by the GEIUA, GEIUB, and GEIUT. The information is
useful for further queries and operation and maintenance (O&M). If any exceptions occur during
the query, ensure that the prerequisites are met before running the query again.