Professional Documents
Culture Documents
Experimenter's Pot
Experimenter's Pot
As you can see, the circuit is powered from a 9V power supply (actually any 9V
power source will work, as long as the current rating is not less than 25mA) stepped
down to 5V by the LM78L05 IC and two filter capacitor one for the input and one
for the output, the wiper arms position is stepped by pressing SW2 for adding the
resistance of wiper arm to high terminal and SW1 for decreasing just like an
ordinary mechanical potentiometer adding the resistance to high terminal decreases
the resistance to low terminal.
Parts List:
C1
C2
U1
U2
SW1,SW2
Notes:
The maximum
wiper current allowed through the DS1869 is only 1 milliamps.
There are three types of DS1869
DS1869-10 use this chip if you want to make a 10K version
DS1869-50 for a 50K version pot.
DS1869-100 for the 100K version
the schematic and the board is drawn using expresspcb it is available for download
you can etch your own PCB using TTM (Toner Transfer Method) or you can order
your boards at http://www.expresspcb.com/