Professional Documents
Culture Documents
Telltale Hole in Reinforcement Pad
Telltale Hole in Reinforcement Pad
Telltale Hole in Reinforcement Pad
As per API 650, telltale hole in Reinforcement pad shall be located substatially on the horizontal
centerline. Could you please explain the reason? What will be the effect if the tellhole located at
other locations?
Pls ans.
As per API 650, there is one 6 mm (1/4") telltale hole in reinforcing plate, on horizontal
centerline to allow breathing of air pockets may be located between reinforcing pad and tank
wall due to expansion and contraction of these air pockets especially during welding. And the
horizontal location at centerline is preferred because it is located at the middle area of whole
reinforcing pad between upper and lower halfs of pad to facilitate good breathing during hot and
cold conditions.
...........................................