The document outlines procedures to measure water temperature at different flow rates. It specifies an initial hot water temperature of 60°C and hot water flow rate of 6.0 L/min while varying the cold water flow rate between 1.5, 3 and 4.5 L/min. The process measures temperature at the inlet, midpoint and outlet of hot and cold water mixtures, records and plots the temperature values to generate graphs comparing temperature at different cold water flow rates.
The document outlines procedures to measure water temperature at different flow rates. It specifies an initial hot water temperature of 60°C and hot water flow rate of 6.0 L/min while varying the cold water flow rate between 1.5, 3 and 4.5 L/min. The process measures temperature at the inlet, midpoint and outlet of hot and cold water mixtures, records and plots the temperature values to generate graphs comparing temperature at different cold water flow rates.
The document outlines procedures to measure water temperature at different flow rates. It specifies an initial hot water temperature of 60°C and hot water flow rate of 6.0 L/min while varying the cold water flow rate between 1.5, 3 and 4.5 L/min. The process measures temperature at the inlet, midpoint and outlet of hot and cold water mixtures, records and plots the temperature values to generate graphs comparing temperature at different cold water flow rates.
2 Procedures 1: Initial Values Of Variables To Be Used:
Controlled hot water temperature = 60C Hot water flow rate QH = 6.0 L/min Cold water flow rate QC= 1.5,3 and 4.5 L/min (then increase accordingly for turbulent flow) 4.3 Procedures 2: Step by Step Process: 1. When the hot water temperature indicator reached 60C, set the outlet hot water flow rate to 6.0 L/min and the cold water flow rate to 1.5 L/min. 2. Let the water run a few moments until the value of TT1 to TT6 stabilized. 3. Record the hot and cold water temperatures at inlet, mid-point and outlet once conditions have stabilized. 4. Directly plot the values of TT1 TT6 (x-axis) versus C (y-axis). 5. Your graph should be similar to the graph below. 6. Repeat step 15 for turbulent cold water flow rate for the value of 3 L/min and 4.5 L/min.