Professional Documents
Culture Documents
Eaton Truck Components Bulletin: TRIB-9602
Eaton Truck Components Bulletin: TRIB-9602
TRIB-9602
Eaton Corporation
Truck Components Operations North America
P.O. Box 4013
Kalamazoo, MI 49003
Bulletin Type:
Service Procedures
Parts Information
Warranty Info.
Topic:
Product Line:
Axle
Brake
Clutch
Transmission
AfterMarket
Speciality
As of June 1, 1995, Eaton Corporation has revised the size of the mounting holes on all remote control housings (see illustration below). The new design increased the diameter and removed the chamfer on the mounting holes of the remote housing.
Capscrews replace the studs and nuts that once held the remote control to the transmission shift bar housing. To mount the
remote control you must use the proper fastener for that design level. If the old design level remote control is ordered, the new
design level remote control will be substituted in its place.
Replaced By
K-3111
K-3110
K-3109
K-3108
K-3107
K-3106
K-3105
OBSOLETE
X-1-610 Nut
14249 Stud
OBSOLETE
X-8-680 Bolt
11932 Washer
CURRENT
X-8C-604
Bolt & Washer Assy.
NOTES:
1) New Fastener Part # X-8C-604
2) RTO 2 series transmissions (example: RTO16210) use the metric flange head fastener part # X-8-1005M
3/96