The document shows diagrams of weld test plates with the required locations and dimensions for different types of weld test specimens, including reduced section tension specimens, side bend specimens, longitudinal root and face bend specimens, and CVN test specimens if required. Notes specify that the groove configuration shown is illustrative, CVN specimens must be removed from the plate if required, and all dimensions are minimum sizes. The diagrams are for qualifying welding procedure specifications for plates over 3/8 inches thick according to AWS D1.1/D1.1M:2010 standards.
The document shows diagrams of weld test plates with the required locations and dimensions for different types of weld test specimens, including reduced section tension specimens, side bend specimens, longitudinal root and face bend specimens, and CVN test specimens if required. Notes specify that the groove configuration shown is illustrative, CVN specimens must be removed from the plate if required, and all dimensions are minimum sizes. The diagrams are for qualifying welding procedure specifications for plates over 3/8 inches thick according to AWS D1.1/D1.1M:2010 standards.
The document shows diagrams of weld test plates with the required locations and dimensions for different types of weld test specimens, including reduced section tension specimens, side bend specimens, longitudinal root and face bend specimens, and CVN test specimens if required. Notes specify that the groove configuration shown is illustrative, CVN specimens must be removed from the plate if required, and all dimensions are minimum sizes. The diagrams are for qualifying welding procedure specifications for plates over 3/8 inches thick according to AWS D1.1/D1.1M:2010 standards.