Professional Documents
Culture Documents
Technical Specification:Pvc Traffic Cones 750Mm: Üstün Baskı Tekstil Plastik Uluslararası Tic.A.Ş
Technical Specification:Pvc Traffic Cones 750Mm: Üstün Baskı Tekstil Plastik Uluslararası Tic.A.Ş
On the base of the cone, there are openings for the accumulated water to flow.
Cone is made of flexible material, easily twisted and straightened , unbreakable.
1.3 MATERIAL PROPERTIES
Raw Material is PVC, and has the following properties.
MATERIAL PROPERTIES
Hardness
Density
Tensile stress at break
Resistance in %100 elongation
Elongation at break
TEST METHOD
Ic solvic pcc 152
ASTM D 792
Ic solvic pcc 160/67
Ic solvic pcc 160/67
Ic solvic pcc 160/67
Page 1/2
UNIT
shore A
gr/cm
kg/cm
kg/cm
%
VALUE
90 5
1,24 0,1
100
40
150
Raw Material is resistant to natural weather conditions between -20 C and +60 C,
1.4 PRODUCTION METHOD
Cone, as a whole part with its base is manufactured by plastic injection method
1.5 PACKAGING
In strong carton boxes, each box contains 10 cones.
2. REFLECTIVE SHEETING
2.1 PERFORMANCE SPECIFICATION
2 pcs micro-prismatic polymeric PVC film on the cone is attached. The table
below shows the performance characteristic
Angle of observation
Angle of entry
0,2
-4
210
Page 2/2