Professional Documents
Culture Documents
RAN14.0 BTS3902E Product Description 03 (20130630) - 1
RAN14.0 BTS3902E Product Description 03 (20130630) - 1
0 BTS3902E
Product Description
Issue
03
Date
2013-06-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer.
All or part of the products, services and features described in this document may not be within the purchase scope or
the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this
document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or
implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this
document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
Contents
Contents
1 Introduction ..................................................................................................................................... 1
1.1 Positioning ....................................................................................................................................................... 1
1.2 Benefits ............................................................................................................................................................ 2
2 Architecture ..................................................................................................................................... 3
2.1 Overview .......................................................................................................................................................... 3
2.2 Ports ................................................................................................................................................................. 4
Issue 03 (2013-06-30)
ii
RAN14.0 BTS3902E
Product Description
1 Introduction
Introduction
1.1 Positioning
The rapid development of mobile communication technology brings sharp growth in the
number of mobile phone users. This growth creates increasingly high requirements for
network quality. Besides enhancing network coverage, operators also need to increase
network capacity to meet rapid increases in traffic volume.
In many hot spots, insufficient of network capacity and the existence of blind spots greatly
affect user experience. To solve these problems, operators urgently need an accurate and
low-cost coverage solution with flexible site deployment.
Following the philosophy of continuous innovation based on customers requirements,
Huawei unveils the industry-leading WCDMA mini base station BTS3902E. Characterized by
its small size, light weight, plug-and-play functionality, auto-configuration, and no
requirements for shelter or equipment room, the BTS3902E is flexible in site acquisition and
deployment, making it a quick and flexible site solution for operators.
The BTS3902E is a bi-carrier product. Figure 1-1 shows the unit.
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
1 Introduction
1.2 Benefits
Compact Structure for Quick Network Construction
With a highly integrated design, the BTS3902 is small, light, and requires less spare parts,
making it easy to install and maintain. The BTS3902E features strong environment
adaptability and has no need for an equipment room. It can be flexibly mounted on a wall or a
pole. The BTS3902E supports both integrated and separated antennas.
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
2 Architecture
Architecture
2.1 Overview
As shown in Figure 2-1, the BTS3902E is an integrated base station with the following main
units: transmission interface unit, main processing unit, baseband processing unit, and RF
unit.
Figure 2-1 BTS3902E Structure
Provide ports for communication with the RNC and the operation and maintenance (O&M)
channels to LMT or M2000.
Manages the entire BTS3902E in a centralized manner in terms of O&M and signaling
processing. Also, provides the system clock.
Schedules and processes the uplink and downlink user-plane data on the Iub interface.
RF unit
Modulates, demodulates, processes, and combines and divides baseband signals and RF
signals.
Antenna unit
Receives and transmits UMTS signals.
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
2 Architecture
2.2 Ports
The BTS3902E has a modular structure with ports on the bottom panel. Table 2-1 shows ports
on the BTS3902E.
Table 2-1 Ports on the BTS3902E
Modules
Port
Description
Bottom
panel
ANTA_TX/RX
ANTB_TX/RX
ANTC_SON
ETH *
OPT0
OPT1*
MON
PWR
Power input
DBG
Various LEDs
LED area
NOTE
*: Port ETH and port OPT1 cannot be used at the same time.
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
In near-end O&M mode, maintenance personnel log in the local maintenance terminal
(LMT) through a local Ethernet maintenance port to maintain BTS3902Es.
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
LMT: is mainly used to locally or remotely maintain BTS3902Es and configure data.
M2000: short for iManager M2000 Mobile Element Management System, which
centrally manages Huawei network devices; the M2000 also remotely and centrally
manages multiple base stations.
CME: short for Configuration Management Express, which can configures and manages
data for multiple base stations.
Supports the Dynamic Host Configuration Protocol (DHCP) and Adaptive and Active
Cache Pool (AACP). When no data is configured for the system or when the system is
faulty, the O&M channel can be automatically set up. This enhances the system
reliability and facilitates remote troubleshooting.
Equipment performance tests, such as CPU usage test, clock source quality test, and
power test
Service performance tests, such as uplink channel scanning and statistics for service
resource usage
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
Alarm detecting
Alarm reporting
Alarm shielding
Alarm acknowledging
Alarm pre-processing
Issue 03 (2013-06-30)
RAN14.0 BTS3902E
Product Description
Issue 03 (2013-06-30)
10
RAN14.0 BTS3902E
Product Description
5 Technical Specifications
Technical Specifications
5.1 3G RF Specifications
Table 5-1 3G RF Specifications
Item
Specifications
Frequency Band
Frequency Band
Receive Frequency
Band (MHz)
Transmit Frequency
Band (MHz)
1900 MHz
1850 to 1910
1930 to 1990
2100 MHz
1920 to 1980
2110 to 2170
Capacity
Two cells
Uplink: 192 CEs
Downlink: 192 CEs
Receiver sensitivity
Frequency Band
Receive Diversity
Sensitivity for Single
Antenna (dBm)
Receive Diversity
Sensitivity for
Double Antenna
(dBm)
1900 MHz/2100
MHz
-123.0*
-125.8*
NOTE
Internal antenna
Gain
Issue 03 (2013-06-30)
Polarization mode
45
Directionality
Directional
> 33
11
RAN14.0 BTS3902E
Product Description
5 Technical Specifications
Item
Specifications
Horizontal lobe width (3
dB)
> 60
VSWR
<2
Transmission ports
Clock
synchronization
MIMO
Configuration
Carrier
Configuration
Maximum RF
Power per Carrier
2100MHz
MIMO
25W
22.5W
5W
5W
25W
22.5W
5W
5W
Non-MIMO
1900MHz
MIMO
Non-MIMO
The maximum output power equals the maximum output power of the power amplifier minus the
internal loss. The maximum output power is measured at the antenna connector in the RF module.
MIMO
Configuration
Carrier
Configuration
Typical Power
Consumption
Maximum
Power
Consumption
2100MHz
MIMO
123
136
124
138
108
117
126
145
Non-MIMO
Issue 03 (2013-06-30)
12
RAN14.0 BTS3902E
Product Description
5 Technical Specifications
Frequency
Band
MIMO
Configuration
Carrier
Configuration
Typical Power
Consumption
Maximum
Power
Consumption
1900MHz
MIMO
122
135
123
137
108
117
126
145
Non-MIMO
The typical power consumption is measured with the equipment 40% loaded at a temperature of
25C.
The maximum power consumption is measured with the equipment 100% loaded at a temperature of
25C.
Specification
Dimensions
(height x
width x
depth)
Weight
Input
voltage
Input
Output
MTBF
MTTR
1 hours
Availability
0. 999996
Issue 03 (2013-06-30)
13
RAN14.0 BTS3902E
Product Description
5 Technical Specifications
Specification
Temperature
Storage
temperature
-40C to +70C
Ambient
relative
humidity
5% RH to 100% RH
Storage
relative
humidity
1 g/m3 to 30g/m3
Altitude
-60m to +1800m
Air pressure
Operating
environment
Storage
environment
Transportatio
n
environment
Anti-seismic
performance
Issue 03 (2013-06-30)
14
RAN14.0 BTS3902E
Product Description
5 Technical Specifications
Specifications
EMC
CISPR 22
EN 55022
EN 301 489-17
EN 301 489-23
CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
GB 9254
VCCI V-3
GB 9254-2008
3GPP
Environmental protection
standard
RoHS
Lightning
standard
protection
Protection standard
Security standard
IEC60950-22,
EN60950-22,
Environmental standard
Protection level
IP65
Issue 03 (2013-06-30)
15
RAN14.0 BTS3902E
Product Description
C
CAPEX
Capital Expenditure
CE
Channel Element
D
DHCP
E
EIRP
EMC
Electromagnetic Compatibility
F
FE
Fast Ethernet
G
GE
Gigabit Ethernet
GGSN
H
HSDPA
HSUPA
HSPA+
HPBW
Half-power beamwidth
Issue 03 (2013-06-30)
16
RAN14.0 BTS3902E
Product Description
I
IEEE
IP
Internet Protocol
L
LMT
M
MAC
MGW
Media Gateway
MIMO
Multiple-input multiple-output
MSC
MTBF
O
OFDM
P
PA
Power Amplifier
R
RNC
RoHS
S
SGSN
T
TRX
Transceiver
U
UE
Issue 03 (2013-06-30)
User Equipment
17
RAN14.0 BTS3902E
Product Description
UMTS
W
WCDMA
Issue 03 (2013-06-30)
18