Professional Documents
Culture Documents
How To Knot A Tie
How To Knot A Tie
How To Knot A Tie
Place tie over your shoulders with the wide end hanging over your left shoulder. Make
sure your collar is up. Adjust the tie so that you only have about a foot hanging on your
right side.
Cross the left end over the right end about 4-6 inches past the tip of the short end.
Pinch the cross-over and pull the wide end up behind the cross-over to make a loop. After
you have pulled the wide end out of the loop, make sure that it hangs to the left side of the
knot.
Take the wide end at your left and pull it around the back. Pull tight.
Pull the wide end over the front of the knot and through the hole. Tighten to the left.
Pull the wide end around the front and back again and up through the hole.
Pull the wide end through the knot behind the front layer of the tie which you just wrapped
around the knot in Step 6.
Step 8: Tighten
Pull the wide end down to tighten up the knot. Make sure it looks good as you tighten it.
Step 9: Finish Up
Pull on the thinner end and push up on the knot to pull the knot up to your collar. Fix your
collar and you're done!