Professional Documents
Culture Documents
M.E. Degree Examinations: June 2014: DX X X e
M.E. Degree Examinations: June 2014: DX X X e
(15,10)
(Regulation 2013)
Second Semester
CAD/CAM
P13CCT202/CCM502: Advanced Finite Element Analysis
Time: Three Hours
(15,5)
(10,7.5)
Analyse the figure given below and conclude what will be the size of the stiffness matrix if you
choose it has linear 1-D element having two degrees of freedom at each node.
13.
14.
(6)
isoparametric elements?
(ii)
2.
3.
4.
Distinguish plane stress and plane strain analysis with suitable examples.
5.
6.
7.
8.
9.
= [ 3e x + x 2
1
1
x+ 2
]dx
(10)
using one point and
Develop the element stiffness matrix and mass matrix for a rod under free axial
vibration.
16.
10. How many natural frequencies and mode shapes does a distributed mass system will have?
Shown below.
Derive the stiffness matrix and its finite element equation for a beam element
12.
Evaluate the element stiffness matrix for the elements shown in figure below.
The coordinates are given in mm. Assume plane stress conditions. (Ap)
Take E = 210 GPa
= 0.25 and
*************
t =10 mm.
Page 1 of 2
Page 2 of 2